View 05041A0R5CA79A_5713365.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

avx advanced ceramic capacitors for power supply, high voltage and tip and ring applications version 12.7 www. avx .com
contents introduction C application specific mlcs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 smps (switch mode power supply) capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 sm style stacked mlc capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-29 rm style stacked mlc capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-32 smm style stacked mlc capacitors extended range . . . . . . . . . . . . . . . . . . . . . . . . . 33-34 smx high temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-38 ch/cv style vertical/horizontal mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-44 sxp style for high temperature application up to 200o . . . . . . . . . . . . . . . . . . . . . . . . . 45-46 turbocap tm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-49 rohs turbocap tm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-52 mini-turbocap tm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 mh style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 rh style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56 custom lead configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 assembly guidelines (sm, ch, cv & rh styles) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59 sk style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-61 se style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-63 cecc offering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 high voltage mlc leaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 escc qualified smps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65-70 hv style (us preferred sizes) dip lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-73 ch/cv style (european preferred sizes) vertical/horizontal mount, dip & radial lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74-77 sv style radial lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78- 81 mlc chip capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 basic construction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 general description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 -86 surface mounting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87-91 mil-prf-123/chips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92-9 6 high voltage mlc chips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97-98 high voltage mlcc tin/lead termination b . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99-100 high voltage mlc chips flexiterm ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101-102 high voltage mlc leaded chips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103-104 hi-q ? high rf power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105-111 tip & ring chips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 -113 tip & ring tin/lead termination b . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114-115 mlc chips, packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116-117 high voltage ceramic capacitors 15 to 100kv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118-124 single-in-line packages (sip) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125-126 discoidal mlc feed-through capacitors, filters and arrays . . . . . . . . . . . . . . . . . . 127-130 dc style (us preferred sizes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128-129 custom discoidal arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 0 filtered arrays xd type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 baseline management C bs9100 requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 advanced application specific products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
2 application specific mlcs problem solving at the leading edge as the worlds leading manufacturer and innovator in application specific multilayer ceramic (asmlc) capacitors, avx offers a unique technological and production capability to the field. avx actively purs ues and satisfies the high reliability and custom needs of a variety of governmental and industrial customers. successful involvement in missile programs, extensive work in ultra-high reliability tele communi cations and sophisticated capacitor design applications C all have established avx as the source for advanced and high reliability asmlc capacitors. advanced products are iso9001 certified organizations for design and manufacturing of mlc capacitors. avx advanced application capacitors are organized around three distinct functions: ? application specific development laboratories ? advanced manufacturing facilities ? quality control international space station defense / military telecommunications undersea cable repeater for designs or applications not listed please consult advanced products. olean, ny, usa - 716-372-6611 coleraine, northern ireland - ++44(0) 28703 44188 st. appollinaire, france - ++33(0) 38071 7400
3 application specific development laboratories initially, avx technical personnel communicate with customers to learn the requirements that the new capacitor must satisfy. the personnel involved are well-versed in material, manufac- turing and electronic application technologies. they study the overall application and the environment in which the part will function. programs are begun for selection of appropriate ceramic formulations, metal systems and designs. these pro- grams yield a detailed technology profile from which mechan- ical design and process specifications follow. advanced manufacturing facilities the ability and reputation of avx in high reliability mlcs is due in part to the companys complete control over all phases of the production process. this includes powder processing, tape casting and/or wet build-up, green mlc assembly and final capacitor assembly/packaging. recent renovations at avx have upgraded green mlc assembly areas to certified clean room levels. a favorite feature with many customers of avx is our ability to work with customers in solving special packaging requirements. this includes special lead configurations and multiple chip packaging that simplifies the mounting of specialty capacitors. to the customer, the total capability of avx assures a high level of consistent control at all steps of production. quality control the q. a. organization is an integral part of manufacturing. quality control tests the product of each manufacturing process, detects flaws or variations from the narrow acceptable standard and isolates the cause of the deviation. corrective action can then be taken to return the process to within its predetermined control levels. quality assurance has large and well-equipped laboratories where statistical samples are evaluated and tested to determine failure rates, characterize products and assure compliance with specification. both destructive and non- destructive testing are used, including advanced ultrasonic inspection equipment for non-destructive inspection of an entire production quantity. put the experience, technology and facilities of the leading company in multilayer ceramics to work for you. no other source offers the unique combination of capability and commitment to advanced application specific components. application specific mlcs problem solving at the leading edge
4 foreword high speed switch mode power supplies place high demands on the capacitors used in the input or output filters of resonant dc-dc or pulse modulated dc-dc converters. avx corporation has developed several multilayer ceramic (mlc) capacitor styles for these switcher applications. these capacitors have been extensively tested and characterized and found to have almost ideal performances to meet the stringent requirements of these applications. input filter capacitor the input filter capacitor is required to perform two functions: to supply an unrestricted burst of current to the power supply switch circuitry and to not only do it without generating any noise, but to help suppress noise generated in the switch circuitry. it is, in effect, a very large decoupling capacitor. it must have very low esl, capabilities for very high dv/dt, as well as di/dt and it must have a very low esr to eliminate power loss. the distance from the primary dc source, as well as the type of capacitor used in this source (usually electrolytics), presents a very high inductance to the input of the switcher. the mlc input capacitor, with its excellent esl and esr characteristics, is located physically close to the switch circuitry. repetitive peak currents, inherent with the switcher design, require a high ripple capability, as well as high surge capability for transients, both induced and conducted from other sources. mlcs have both these capabilities. output filter capacitor the output from the switching circuit of a switcher consists of current on and off. from an elevated dc reference, this current is an ac ripple additive on the dc. in order to smooth this ripple effect, a filter circuit (usually inductive input) is built to allow a storage of energy to take place during the rising ripple portion and to allow a discharge of energy during the falling ripple portion. the esr and esl of the capacitor contribute to the net ripple effect. the output filter capacitor is chosen for esr, and with previous types of capacitors, multiples were used in an attempt to lower the net esr. the mlc offers esrs well below the minimum allowable to lower noise levels, thus eliminating the need for multiple units. other mlc capacitors for smps applications avx also manufactures coupling, decoupling, resonant and snubber capacitors for smps applications. contact avx for application specific s.m.p.s. capacitor requirements. olean, ny, usa 716-372-6611 coleraine, northern ireland ++44(0) 28703 44188 st. apollinaire, france ++33(0) 38071 7400 smps capacitors smps capacitor applications performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
5 smps capacitors capacitor selection and performance a bsolute maximum output capacitance assuming no esl and no esr 25 20 15 10 5 0 load current - amps 0 5 10 15 20 maximum output filter capacitance 2 mhz 1 mhz 500 khz 250 khz ( f) 50 mv noise due to capacitance absolute maximum capacitance esl assuming no esr - capacitive induced ripple 25 20 15 10 5 0 load current - amps 0 5 10 15 20 maximum output filter capacitance esl ? (nh) dip leads sk series 250 khz 500 khz 1 mhz 2 mhz 50 mv noise due to esl absolute maximum capacitance esr assuming no esl - capacitive induced ripple 25 20 15 10 5 0 load current - amps 010203040 maximum output filter capacitance esr (mohm) 50 mv noise due to esr dip leads sk series ai electrolytic 15 f mlc sm02 10 f wet ta 10 f solid ta 5.6 f mlc sm04 4.7 f 10 10 10 10 10 capacitance ( f) 0 2 4 6 8 10 12 14 16 time (seconds) -5 -6 -7 -8 -9 capacitance as measured from dv/dt slope 200 ma/ns current pulse measurement starts after inductive ring decay asmlc capacitor selection asmlc capacitor performance smps design information (sm, ch, cv, rh and sk styles)
6 ac ripple capability due to the wide range of product offering in this catalog, the ac ripple capabilities for switch mode power supply capacitors and high voltage capacitors are provided in the form of ibm compatible software package called spicalci. it is available free from avx and can be downloaded for free from avx website: www.avx.com. spicalci program will provide answers to most of the design engineers questions on critical parameters for their specific applications: ? equivalent series resistance - function of frequency and temperature ? equivalent series inductance - function of design ? self resonant frequency f = 1/ (2 x l x c) ? thermal characteristics - function of design ? ac ripple capabilities - function of frequency, temperature and design typical esr -vs- frequency for sm04 style capacitors 1 f 4.7 f9 f esr (ohms) 10.000 1.000 0.100 0.010 0.001 1.0 10.0 100.0 1000.0 frequency (khz) maximum rms current for 50 vdc, ch - x7r @ 100 khz & 25 c ambient assuming max. cap. for single chip construction a rms 50 45 40 35 30 25 20 15 10 5 0 6.8 ch41 8.7 ch51 10.4 ch61 16.5 ch71 11.9 ch76 29.9 ch81 26.6 ch86 28.8 ch91 style maximum rms current for 50 wvdc, sm - x7r @ 100 khz & 25 c ambient assuming max. cap. for single chip construction 100 khz arms 50 45 40 35 30 25 20 15 10 5 0 36.8 28.3 22.7 9.7 5.7 33.8 sm01 sm02 sm03 sm04 sm05 sm06 style maximum rms current for 25 wvdc, sk - z5u @ 100 khz & 25 c ambient assuming max. cap. for each style 100 khz arms 12 10 8 6 4 2 0 1.7 4.5 6.2 7.4 7.7 11.0 6.7 8.7 sk01 sk04 sk05 sk06 sk07 sk08 sk09 sk10 style example (sk only) smps capacitors capacitor performance example (ch only) example (sm only) examples of product performance
7 smps capacitors application information on supracap ? high speed switch mode power supplies require extremely low equivalent series resistance (esr) and equivalent series inductance (esl) capacitors for input and output filtering. these requirements are beyond the practical limits of electrolytic capacitors, both aluminum and tantalums, but are readily met by multilayer ceramic (mlcs) capacitors (figure 1). theoretical smpss output filter capacitor values are in the range of 6-10 f/amp at 40khz and drop to less than 1 f/amp at 1mhz. most electrolytic applications use 10 to 100 times the theoretical value in order to obtain lower esr from paralleling many capacitors. this is not necessary with supracap ? mlc capacitors which inherently have esrs in the range of milliohms. these extremely low values of esr mean low ripple voltage and less self-heating of the capacitor. output noise spikes are reduced by lowering the filter capac- itance self-inductance. the ripple current is a triangle wave form with constant di/dt except when it changes polarity, then the di/dt is very high. the noise voltage generated by the filter capacitor is v noise = l capacitor di/dt avx supracap ? devices have inductance value less than 3nh. figure 2 compares a 5.6 f mlc to a 5.6 f tantalum which was specially designed for low esr and esl. when subjected to a di/dt of 200 ma/ns the tantalum shows an esr of 165 m and an esl of 18nh versus the mlcs 4 m and 0.3 nh. these performance differences allow considerable reduction in size and weight of the filter capacitor. additionally, mlcs are compatible with surface mount technology reflow and assembly techniques which is the desirable assembly for conversion frequencies exceeding 1 mhz. electrolytic capacitors (both aluminum and tantalum) are not compatible with normal vapor phase (vps) or infrared (ir) reflow temperatures (205-215c) due to electrolyte and structural problems. avx supracap ? devices are supplied with lead frames for either thru-hole or surface mount assembly. the lead frames act as stress relief for differences in coefficients of expansion between the large ceramic chip ( 10 ppm/c) and the pc boards. dsw 16 50mv 50ns tpos-7 ta mlc csw 1 50ns 50mv vzr-0.2 v=2.0mv t=25.5ns figure 2 esr comparison of different capacitor technologies esr -vs- frequency 100f filter capacitors 1.e-03 1.e-02 1.e-01 1.e+00 1.e+03 1.e+04 1.e+05 1.e+06 1.e+07 frequency (hz) aluminum electrolytic 100f / 50v low esr solid tantalum 100f / 10v solid aluminum electrolytic 100f / 16v mlcc 100f / 50v esr ( ) figure 1 supracap ? - large capacitance value mlcs
8 smps stacked mlc capacitors (sm style) technical information on smps capacitors temperature coefficient c0g: a temperature coefficient - 0 30 ppm/c, -55 to +125c x7r: c temperature coefficient - 15%, -55 to +125c z5u: e temperature coefficient - +22, -56%, +10 to +85c capacitance test (mil-std-202 method 305) c0g: 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r: 25c, 1.00.2 vrms (open circuit voltage) at 1khz z5u: 25c, 0.5 vrms max (open circuit voltage) at 1khz dissipation factor 25c c0g: 0.15% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r: 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz z5u: 3.0% max @ 25c, 0.5 vrms max (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) c0g and x7r: 100k m or 1000 m-f, whichever is less. z5u: 10k m or 1000 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) c0g and x7r: 10k m or 100 m-f, whichever is less. z5u: 1k m or 100 m-f, whichever is less. dielectric withstanding voltage 25c (flash test) c0g and x7r: 250% rated voltage for 5 seconds with 50 ma max charging current. (500 volt units @ 750 vdc) z5u: 200% rated voltage for 5 seconds with 50 ma max charging current. life test (1000 hrs) c0g and x7r: 200% rated voltage at +125c. (500 volt units @ 600 vdc) z5u: 150% rated voltage at +85c moisture resistance (mil-std-202 method 106) c0g, x7r, z5u: ten cycles with no voltage applied. thermal shock (mil-std-202 method 107, condition a) immersion cycling (mil-std-202 method 104, condition b) resistance to solder heat (mil-std-202, method 210, condition b, for 20 seconds) typical esr performance (m) aluminum low esr solid aluminum mlcc mlcc electrolytic solid tantalum electrolytic smps smps 100f/50v 100f/10v 100f/16v 100f/50v 4.7f/50v esr @ 10khz 300 72 29 3 66 esr @ 50khz 285 67 22 2 23 esr @ 100khz 280 62 20 2.5 15 esr @ 500khz 265 56 18 4 8 esr @ 1mhz 265 56 17 7 7.5 esr @ 5mhz 335 72 17 12.5 8 esr @ 10mhz 560 91 22 20 14 electrical specifications note: capacitors with x7r and z5u dielectrics are not intended for applications across ac supply mains or ac line filtering with polarity reversal. contact plant for recommendations. * hi-rel screening for c0g and x7r only. screening consists of 100% group a (b level), subgroup 1 per mil-prf-49470. **form, fit & function equivalent to mil-prf-49470 part. applies to 50v rated parts only. no screening. sm0 avx style sm0 = uncoated sm5 = epoxy coated 1 size see dimensions chart 7 voltage 50v = 5 100v = 1 200v = 2 500v = 7 c temperature coefficient c0g = a x7r = c z5u = e 106 capacitance code (2 significant digits + number of zeros) 10 pf = 100 100 pf = 101 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 1f = 105 10 f = 106 100 f = 107 m capacitance tolerance c0g: j = 5% k = 10% m = 20% x7r: k = 10% m = 20% z = +80%, -20% z5u: m = 20% z = +80%, -20% p = gmv (+100, -0%) a test level a = standard b = hi-rel * 5 = standard/ mil** n termination n = straight lead j = leads formed in l = leads formed out p = p style leads z = z style leads 650 height max dimension a 120 = 0.120" 240 = 0.240" 360 = 0.360" 480 = 0.480" 650 = 0.650" how to order avx styles: sm-1, sm-2, sm-3, sm-4, sm-5, sm-6 performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant
9 d a b 0.508 (0.020) ty p . 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) 6.35 (0.250) min. e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. smps stacked mlc capacitors (sm style) surface mount and thru-hole styles (sm0, sm5) no. of leads style a (max.) b (max.) c .635 (0.025) d .635 (0.025) e (max.) per side sm-1 11.4 (0.450) 52.1 (2.050) 12.7 (0.500) 20 sm-2 20.3 (0.800) 38.4 (1.510) 22.1 (0.870) 15 sm-3 11.4 (0.450) 26.7 (1.050) 12.7 (0.500) 10 sm-4 10.2 (0.400) 10.2 (0.400) 11.2 (0.440) 4 sm-5 6.35 (0.250) 6.35 (0.250) 7.62 (0.300) 3 sm-6 31.8 (1.250) 52.1 (2.050) 34.3 (1.350) 20 note: for sm5 add 0.127 (0.005) to max. and nominal dimensions a, b, d, & e n style leads e c rad. 0.254 (0.010) (typ) detail b 0.254 (0.010) typ. chip separation 0.254 (0.010) typ. 1.270 0.254 (0.050 0.010) 2.794 0.254 (0.110 0.010) 1.778 0.254 (0.070 0.010) 3.048 0.381 (0.120 0.015) detail b z style leads e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. b detail a 4.191 0.254 (0.165 0.010) 1.651 0.254 (0.065 0.010) 2.540 0.254 (0.100 0.010) 6.350 (0.250) min 1.016 0.254 (0.040 0.010) r 0.508 (0.020) 3 places capacitor detail a p style leads j style leads dimensions millimeters (inches) see page 10 for maximum a dimension for n style leads: a dimension plus 1.651 (0.065) for j & l style leads: a dimension plus 2.032 (0.080) for p style leads: a dimension plus 4.445 (0.175) for z style leads: a dimension plus 3.048 (0.120) e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.905 (0.075) 0.635 (0.025) typ. 1.778 (0.070) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.778 (0.070) 1.905 (0.075) 0.635 (0.025) typ. 0.254 (0.010) l style leads
10 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 1.0 .70 .40 .18 1.2 1.0 .60 .26 .47 .40 .20 .09 27 12 7.0 2.6 41 18 11 4.0 18 6.0 3.6 1.3 84 32 12 ? ? 110 46 34 ? ? 40 15 6.0 ? ? smps stacked mlc capacitors (sm style) max capacitance (f) available versus style with height (a) of 0.120" - 3.05mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .16 .13 .07 .02 .05 .04 .02 .01 3.2 2.4 1.3 .50 7.5 1.8 1.1 .40 2.8 .68 .40 .16 80 40 24 9.4 12 4.6 3.0 ? ? 4.6 1.8 .72 ? ? 260 140 92 ? ? max capacitance (f) available versus style with height (a) of 0.240" - 6.10mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 2.0 1.4 .80 .36 2.4 2.0 1.2 .52 1.0 .80 .40 .18 54 24 14 5.2 82 36 22 8.0 36 12 7.2 2.6 160 64 24 ? ? 230 92 68 ? ? 80 30 12 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .32 .26 .14 .05 .10 .08 .05 .02 6.4 4.8 2.6 1.0 15 3.6 2.2 .80 5.6 1.3 .80 .32 160 80 48 18 24 9.2 6.0 ? ? 9.2 3.6 1.4 ? ? 520 280 180 ? ? max capacitance (f) available versus style with height (a) of 0.360" - 9.14mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 3.0 2.1 1.2 .54 3.6 3.0 1.8 .78 1.5 1.2 .60 .27 82 36 21 7.8 120 54 33 12 54 18 10 3.9 250 96 36 ? ? 350 130 100 ? ? 120 45 18 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .48 .39 .21 .07 .15 .12 .07 .03 9.6 7.2 3.9 1.5 22 5.4 3.3 1.2 8.2 2.0 1.2 .48 240 120 72 28 36 13 9.0 ? ? 13 5.4 2.1 ? ? 780 430 270 ? ? max capacitance (f) available versus style with height (a) of 0.480" - 12.2mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 4.0 2.8 1.6 .72 4.8 4.0 2.2 1.0 2.0 1.6 .80 .36 110 48 28 10 160 72 44 16 72 24 14 5.2 330 120 48 ? ? 470 180 130 ? ? 160 60 24 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .64 .52 .28 .10 .20 .16 .10 .04 12 9.6 5.2 2.0 30 7.2 4.4 1.6 10 2.7 1.6 .64 320 160 96 37 48 18 12 ? ? 18 7.2 2.8 ? ? 1000 570 360 ? ? max capacitance (f) available versus style with height (a) of 0.650" - 16.5mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 5.0 3.5 2.0 .90 6.0 5.0 3.0 1.3 2.5 2.0 1.0 .47 130 60 35 13 200 90 55 20 90 30 18 6.5 420 160 60 ? ? 590 230 170 ? ? 200 75 30 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .80 .65 .35 .12 .25 .20 .12 .05 16 12 6.5 2.5 36 9.0 5.5 2.0 12 3.4 2.0 .80 400 200 120 47 60 23 15 ? ? 23 9.0 3.6 ? ? 1300 720 460 ? ? sm01 _ _ _ _ _ _ an120 sm02 _ _ _ _ _ _ an120 sm03 _ _ _ _ _ _ an120 sm04 _ _ _ _ _ _ an120 sm05 _ _ _ _ _ _ an120 sm06 _ _ _ _ _ _ an120 avx style c0g x7r z5u sm01 _ _ _ _ _ _ an240 sm02 _ _ _ _ _ _ an240 sm03 _ _ _ _ _ _ an240 sm04 _ _ _ _ _ _ an240 sm05 _ _ _ _ _ _ an240 sm06 _ _ _ _ _ _ an240 avx style c0g x7r z5u sm01 _ _ _ _ _ _ an360 sm02 _ _ _ _ _ _ an360 sm03 _ _ _ _ _ _ an360 sm04 _ _ _ _ _ _ an360 sm05 _ _ _ _ _ _ an360 sm06 _ _ _ _ _ _ an360 avx style c0g x7r z5u sm01 _ _ _ _ _ _ an480 sm02 _ _ _ _ _ _ an480 sm03 _ _ _ _ _ _ an480 sm04 _ _ _ _ _ _ an480 sm05 _ _ _ _ _ _ an480 sm06 _ _ _ _ _ _ an480 avx style c0g x7r z5u sm01 _ _ _ _ _ _ an650 sm02 _ _ _ _ _ _ an650 sm03 _ _ _ _ _ _ an650 sm04 _ _ _ _ _ _ an650 sm05 _ _ _ _ _ _ an650 sm06 _ _ _ _ _ _ an650 avx style c0g x7r z5u
11 smps stacked mlc capacitors sm s style leads (sm0, sm5) no. of leads style a (max.) b (max.) d .635 (0.025) e (max.) per side sm-3 26.7 (1.050) 12.7 (0.500) 5 sm-4 10.2 (0.400) 11.2 (0.440) 2 sm-5 6.35 (0.250) 7.62 (0.300) 1 note: for sm5 add 0.127 (0.005) to max. and nominal dimensions a, b, d, & e dimensions millimeters (inches) see page 10 for maximum a dimension for s style leads: a dimension plus 0.381 (0.015) d a b 0.381 - 0.635 r typ. (0.015 - 0.025 r. typ.) 2 places 2.540 0.254 (0.100 0.010) 0.381 0.127 (0.015 0.005) 1.067 0.254 (0.042 0.010) 2.286 0.254 (0.090 0.010) detail c 5.08 typ. (0.200 typ.) 3.05 typ. (0.120 typ.) chip separation 0.254 (0.010) typ. 0.178 (0.007) typ. 0.254 0.130 (0.010 0.005) detail c e s style leads
12 smps stacked mlc capacitors (sm style) sm military styles mil-prf-49470 avx is qualified to mil-prf-49470/1 and mil-prf-49470/2 the smps capacitors are designed for high current, high- power and high-temperature applications. these capacitors have very low esr (equivalent series resistance) and esl (equivalent series inductance). smps series capacitors offer design and component engineers a proven technology specifically designed for programs requiring high reliability performance in harsh environments. mil-prf-49470 smps s eries capacitors are primarily used in input/output filters of high-power and high-voltage power supplies as well as in bus filters and dc snubbers for high power inverters and other high-current applications. these capacitors are available with through-hole and surface mount leads. the operating temperature is -55 c to +125 c . the mil-prf-49470 capacitors are preferred over the dscc drawing 87106 capacitors. mil-prf-49470 specifi- cation was created to produce a robust replacement for dscc 87106. mil-prf-49470 offers two product levels. level b is the standard reliability. level t is the high relia- bility suitable for space application. avx is qualified to supply mil-prf-49470/1 parts. these are unencapsulated ceramic dielectric, switch mode power supply capacitors. avx is also qualified to supply mil-prf- 49470/2 parts. these are encapsulated ceramic dielectric, switch mode power supply capacitors. please contact the dscc website [http://www.dscc.dla.mil/programs/milspec/docsearch.asp] for details on testing, electrical, mechanical and part number options. please contact the dscc website [http://www.dscc.dla.mil/ p rograms/ q ml q pl/] for the latest qpl ( q ualified p roducts l ist). m49470 performance specification indicating mil-prf-49470 r characteristic 01 performance specification sheet number 01 C indicating mil-prf-49470/1 02 C indicating mil-prf-49470/2 474 capacitance k capacitance tolerance c rated voltage n configuration (lead style) how to order performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. for t level parts, replace the m in the pin with t (for example m49470r01474 kcn becomes t49470r01474kcn ) mil-prf-49470 contains additional capacitors that are not available in 87106, such as additional lead configurations and lower profile parts. on the pages to follow is the general dimensional outline along with a cross reference from 87106 parts to mil-prf- 49470 parts. not rohs compliant
13 notes: 1. dimensions are in millimeters (inches) 2. unless otherwise specified, tolerances are 0.254 (0.010). 3. lead frame configuration is shown as typical above the seating plane. 4. see table i of mil-prf-49470/1 for specific maximum a dimension. for maximum b dimension, add 1.65 (0.065) to the appropriate a dimension. for all lead styles, the number of chips is determined by the capacitance and voltage rating. 5. for case code 5, dimensions shall be 2.54 (0.100) maximum and 0.305 (0.012) minimum. 6. lead alignment within pin rows shall be within 0.10 (0.005). mil-prf-49470/1 mil-prf-49470/1 - capacitor, fixed, ceramic dielectric, switch mode power supply (general purpose and temperature stable), standard reliability and high reliability unencapsulated, style ps01 . d 1.397 0.254 (0.055 0.010) b see note 4 a see note 4 6.35 (0.250) min 2.54 (0.100) max 0.635 (0.025) min (see note 5) 2.54 (0.100) typ seating plane see note 3 see note 6 0.508 0.050 (0.020 0.002) c e 6.35 (0.250) min 0.254 0.05 (0.010 0.002) 0.254 (0.010) rad (typ) c e l 1.27 (0.050) min 0.254 (0.010) rad (typ) c e l 1.27 (0.050) min smps stacked mlc capacitors (sm style) sm military styles mil-prf-49470/1 d number of case code c 0.635 (0.025) e (max.) leads min. max. per side 1 11.4 (0.450) 49.5 (1.950) 52.7 (2.075) 12.7 (0.500) 20 2 20.3 (0.800) 36.8 (1.450) 40.0 (1.535) 22.1 (0.870) 15 3 11.4 (0.450) 24.1 (0.950) 27.3 (1.075) 12.7 (0.500) 10 4 10.2 (0.400) 8.89 (0.350) 10.8 (0.425) 11.2 (0.440) 4 5 6.35 (0.250) 6.20 (0.224) 6.97 (0.275) 7.62 (0.300) 3 6 31.8 (1.250) 49.5 (1.950) 52.7 (2.075) 34.3 (1.350) 20 dimensions: millimeters (inches) lead style n and a lead style j and c circuit diagram lead style l and b
14 notes: 1. dimensions are in millimeters (inches) 2. unless otherwise specified, tolerances are 0.254 (0.001). 3. see table i of mil-prf-49470/2 for specific maximum a dimension. for all lead styles, the number of chips is determined by the capacitance and voltage rating. 4. lead alignment within pin rows shall be within 0.10 (0.004). case code c 0.635 (0.025) d 0.635 (0.025) e (max) number of leads per side 1 11.4 (0.450) 54.7 (2.155) 14.7 (0.580) 20 2 20.3 (0.800) 41.0 (1.615) 24.1 (0.950) 15 3 11.4 (0.450) 29.3 (1.155) 14.7 (0.580) 10 4 10.2 (0.400) 12.3 (0.485) 12.3 (0.485) 4 5 6.35 (0.250) 9.02 (0.355) 9.02 (0.355) 3 6 31.8 (1.250) 54.7 (2.155) 36.3 (1.430) 20 dimensions: millimeters (inches) mil-prf-49470/2 mil-prf-49470/2 - capacitor, fixed, ceramic dielectric, switch mode power supply (general purpose and temperature stable), standard reliability and high reliability encapsulated, style ps02 . d 0.38 0.13 (0.015 0.005) a max see note 3 4.45 (0.175) max 1.02 (0.040) min 2.54 (0.100) typ seating plane see note 4 0.50 0.05 (0.020 0.002) c e 6.35 (0.250) min 0.254 0.05 (0.010 0.002) 0.254 (0.010) rad (typ) c e l 1.27 (0.050) min 0.254 (0.010) rad (typ) c e l 1.27 (0.050) min smps stacked mlc capacitors (sm style) sm military styles mil-prf-49470/2 lead style j and c circuit diagram lead style l and b lead style n and a
15 smps stacked mlc capacitors (sm style) sm military styles mil-prf-49470 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) 1 m49470x01105kan sm055c105khn120 1.0 10% 5 50 2 m49470x01105man sm055c105mhn120 1.0 20% 5 50 3 m49470x01125kan sm055c125khn120 1.2 10% 5 50 4 m49470x01125man sm055c125mhn120 1.2 20% 5 50 5 m49470x01155kan sm055c155khn240 1.5 10% 5 50 6 m49470x01155man sm055c155mhn240 1.5 20% 5 50 7 m49470x01185kan sm055c185khn240 1.8 10% 5 50 8 m49470x01185man sm055c185mhn240 1.8 20% 5 50 9 m49470x01225kan sm055c225khn240 2.2 10% 5 50 10 m49470x01225man sm055c225mhn240 2.2 20% 5 50 11 m49470x01275kan sm055c275khn360 2.7 10% 5 50 12 m49470x01275man sm055c275mhn360 2.7 20% 5 50 13 m49470x01335kan sm055c335khn360 3.3 10% 5 50 14 m49470x01335man sm055c335mhn360 3.3 20% 5 50 15 m49470x01395kan sm055c395khn480 3.9 10% 5 50 16 m49470x01395man sm055c395mhn480 3.9 20% 5 50 17 m49470x01475kan sm055c475khn480 4.7 10% 5 50 18 m49470x01475man sm055c475mhn480 4.7 20% 5 50 m49470x01475kaa sm045c475khn240 4.7 10% 4 50 m49470x01475maa sm045c475mhn240 4.7 20% 4 50 19 m49470x01565kan sm055c565khn650 5.6 10% 5 50 20 m49470x01565man sm055c565mhn650 5.6 20% 5 50 m49470x01565kaa sm045c565khn240 5.6 10% 4 50 m49470x01565maa sm045c565khn240 5.6 20% 4 50 21 m49470x01825kan sm045c825khn360 8.2 10% 4 50 22 m49470x01825man sm045c825mhn360 8.2 20% 4 50 23 m49470x01106kan sm045c106khn480 10 10% 4 50 24 m49470x01106man sm045c106mhn480 10 20% 4 50 25 m49470x01126kan sm045c126khn480 12 10% 4 50 26 m49470x01126man sm045c126mhn480 12 20% 4 50 27 m49470x01156kan sm045c156khn650 15 10% 4 50 28 m49470x01156man sm045c156mhn650 15 20% 4 50 m49470x01156kaa sm035c156khn240 15 10% 3 50 m49470x01156maa sm035c156mhn240 15 20% 3 50 29 m49470x01186kan sm035c186khn240 18 10% 3 50 30 m49470x01186man sm035c186mhn240 18 20% 3 50 31 m49470x01226kan sm035c226khn360 22 10% 3 50 32 m49470x01226man sm035c226mhn360 22 20% 3 50 33 m49470x01276kan sm035c276khn360 27 10% 3 50 34 m49470x01276man sm035c276mhn360 27 20% 3 50 35 m49470x01336kan sm035c336khn360 33 10% 3 50 36 m49470x01336man sm035c336mhn360 33 20% 3 50 37 m49470x01396kan sm035c396khn480 39 10% 3 50 38 m49470x01396man sm035c396mhn480 39 20% 3 50 39 m49470x01476kan sm035c476khn650 47 10% 3 50 40 m49470x01476man sm035c476mhn650 47 20% 3 50 m49470x01476kaa sm025c476khn240 47 10% 2 50 m49470x01476maa sm025c476mhn240 47 20% 2 50 41 m49470x01686kan sm015c686khn480 68 10% 1 50 42 m49470x01686man sm015c686mhn480 68 20% 1 50 m49470x01686kaa sm025c686khn360 68 10% 2 50 m49470x01686maa sm025c686mhn360 68 20% 2 50 43 m49470x01826kan sm015c826khn480 82 10% 1 50 44 m49470x01826man sm015c826mhn480 82 20% 1 50 m49470x01826kaa sm025c826khn360 82 10% 2 50 m49470x01826maa sm025c826mhn360 82 20% 2 50 45 m49470x01107kan sm015c107khn650 100 10% 1 50 46 m49470x01107man sm015c107mhn650 100 20% 1 50 m49470x01107kaa sm025c107khn480 100 10% 2 50 m49470x01107maa sm025c107mhn480 100 20% 2 50 47 m49470x01157kan sm025c157khn650 150 10% 2 50 48 m49470x01157man sm025c157mhn650 150 20% 2 50 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) 49 m49470x01187kan sm065c187khn480 180 10% 6 50 50 m49470x01187man sm065c187mhn480 180 20% 6 50 51 m49470x01227kan sm065c227khn480 220 10% 6 50 52 m49470x01227man sm065c227mhn480 220 20% 6 50 53 m49470x01277kan sm065c277khn650 270 10% 6 50 54 m49470x01277man sm065c277mhn650 270 20% 6 50 55 m49470x01684kbn sm051c684khn120 0.68 10% 5 100 56 m49470x01684mbn sm051c684mhn120 0.68 20% 5 100 57 m49470x01824kbn sm051c824khn240 0.82 10% 5 100 58 m49470x01824mbn sm051c824mhn240 0.82 20% 5 100 59 m49470x01105kbn sm051c105khn240 1.0 10% 5 100 60 m49470x01105mbn sm051c105mhn240 1.0 20% 5 100 61 m49470x01125kbn sm051c125khn240 1.2 10% 5 100 62 m49470x01125mbn sm051c125mhn240 1.2 20% 5 100 63 m49470x01155kbn sm051c155khn360 1.5 10% 5 100 64 m49470x01155mbn sm051c155mhn360 1.5 20% 5 100 65 m49470x01185kbn sm051c185khn360 1.8 10% 5 100 66 m49470x01185mbn sm051c185mhn360 1.8 20% 5 100 67 m49470x01225kbn sm051c225khn480 2.2 10% 5 100 68 m49470x01225mbn sm051c225mhn480 2.2 20% 5 100 m49470x01225kba sm041c225khn240 2.2 10% 4 100 m49470x01225mba sm041c225mhn240 2.2 20% 4 100 69 m49470x01275kbn sm051c275khn480 2.7 10% 5 100 70 m49470x01275mbn sm051c275mhn480 2.7 20% 5 100 71 m49470x01335kbn sm051c335khn650 3.3 10% 5 100 72 m49470x01335mbn sm051c335mhn650 3.3 20% 5 100 m49470x01335kba sm041c335khn240 3.3 10% 4 100 m49470x01335mba sm041c335mhn240 3.3 20% 4 100 73 m49470x01395kbn sm041c395khn360 3.9 10% 4 100 74 m49470x01395mbn sm041c395mhn360 3.9 20% 4 100 75 m49470x01475kbn sm041c475khn360 4.7 10% 4 100 76 m49470x01475mbn sm041c475mhn360 4.7 20% 4 100 77 m49470x01565kbn sm041c565khn480 5.6 10% 4 100 78 m49470x01565mbn sm041c565mhn480 5.6 20% 4 100 79 m49470x01685kbn sm041c685khn480 6.8 10% 4 100 80 m49470x01685mbn sm041c685mhn480 6.8 20% 4 100 81 m49470x01825kbn sm041c825khn650 8.2 10% 4 100 82 m49470x01825mbn sm041c825mhn650 8.2 20% 4 100 m49470x01825kba sm031c825khn240 8.2 10% 3 100 m49470x01825mba sm031c825mhn240 8.2 20% 3 100 83 m49470x01126kbn sm031c126khn240 12 10% 3 100 84 m49470x01126mbn sm031c126mhn240 12 20% 3 100 85 m49470x01156kbn sm031c156khn360 15 10% 3 100 86 m49470x01156mbn sm031c156mhn360 15 20% 3 100 87 m49470x01186kbn sm031c186khn360 18 10% 3 100 88 m49470x01186mbn sm031c186mhn360 18 20% 3 100 89 m49470x01226kbn sm031c226khn480 22 10% 3 100 90 m49470x01226mbn sm031c226mhn480 22 20% 3 100 91 m49470x01276kbn sm031c276khn650 27 10% 3 100 92 m49470x01276mbn sm031c276mhn650 27 20% 3 100 m49470x01276kba sm021c276khn240 27 10% 2 100 m49470x01276mba sm021c276mhn240 27 20% 2 100 93 m49470x01336kbn sm011c336khn360 33 10% 1 100 94 m49470x01336mbn sm011c336mhn360 33 20% 1 100 m49470x01336kba sm021c336khn240 33 10% 2 100 m49470x01336mba sm021c336mhn240 33 20% 2 100 95 m49470x01396kbn sm011c396khn480 39 10% 1 100 96 m49470x01396mbn sm011c396mhn480 39 20% 1 100 m49470x01396kba sm021c396khn360 39 10% 2 100 m49470x01396mba sm021c396mhn360 39 20% 2 100 97 m49470x01476kbn sm011c476khn480 47 10% 1 100 98 m49470x01476mbn sm011c476mhn480 47 20% 1 100
16 smps stacked mlc capacitors (sm style) sm military styles mil-prf-49470 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) m49470x01476kba sm021c476khn360 47 10% 2 100 m49470x01476mba sm021c476mhn360 47 20% 2 100 99 m49470x01566kbn sm011c566khn650 56 10% 1 100 100 m49470x01566mbn sm011c566mhn650 56 20% 1 100 101 m49470x01686kbn sm021c686khn480 68 10% 2 100 102 m49470x01686mbn sm021c686mhn480 68 20% 2 100 103 m49470x01826kbn sm021c826khn650 82 10% 2 100 104 m49470x01826mbn sm021c826mhn650 82 20% 2 100 105 m49470x01107kbn sm061c107khn360 100 10% 6 100 106 m49470x01107mbn sm061c107mhn360 100 20% 6 100 107 m49470x01127kbn sm061c127khn360 120 10% 6 100 108 m49470x01127mbn sm061c127mhn360 120 20% 6 100 109 m49470x01157kbn sm061c157khn480 150 10% 6 100 110 m49470x01157mbn sm061c157mhn480 150 20% 6 100 111 m49470x01187kbn sm061c187khn650 180 10% 6 100 112 m49470x01187mbn sm061c187mhn650 180 20% 6 100 113 m49470r01474kcn sm052c474khn240 0.47 10% 5 200 114 m49470r01474mcn sm052c474mhn240 0.47 20% 5 200 115 m49470r01564kcn sm052c564khn240 0.56 10% 5 200 116 m49470r01564mcn sm052c564mhn240 0.56 20% 5 200 117 m49470r01684kcn sm052c684khn360 0.68 10% 5 200 118 m49470r01684mcn sm052c684mhn360 0.68 20% 5 200 119 m49470r01824kcn sm052c824khn360 0.82 10% 5 200 120 m49470r01824mcn sm052c824mhn360 0.82 20% 5 200 121 m49470r01105kcn sm052c105khn480 1.0 10% 5 200 122 m49470r01105mcn sm052c105mhn480 1.0 20% 5 200 m49470r01105kca sm042c105khn120 1.0 10% 4 200 m49470r01105mca sm042c105mhn120 1.0 20% 4 200 123 m49470r01125kcn sm052c125khn480 1.2 10% 5 200 124 m49470r01125mcn sm052c125mhn480 1.2 20% 5 200 m49470r01125kca sm042c125khn240 1.2 10% 4 200 m49470r01125mca sm042c125mhn240 1.2 20% 4 200 125 m49470r01155kcn sm052c155khn650 1.5 10% 5 200 126 m49470r01155mcn sm052c155mhn650 1.5 20% 5 200 m49470r01155kca sm042c155khn240 1.5 10% 4 200 m49470r01155mca sm042c155mhn240 1.5 20% 4 200 127 m49470r01185kcn sm042c185khn360 1.8 10% 4 200 128 m49470r01185mcn sm042c185mhn360 1.8 20% 4 200 129 m49470r01225kcn sm042c225khn360 2.2 10% 4 200 130 m49470r01225mcn sm042c225mhn360 2.2 20% 4 200 131 m49470r01275kcn sm042c275khn480 2.7 10% 4 200 132 m49470r01275mcn sm042c275mhn480 2.7 20% 4 200 133 m49470r01335kcn sm042c335khn480 3.3 10% 4 200 134 m49470r01335mcn sm042c335mhn480 3.3 20% 4 200 135 m49470r01395kcn sm042c395khn650 3.9 10% 4 200 136 m49470r01395mcn sm042c395mhn650 3.9 20% 4 200 m49470r01395kca sm032c395khn240 3.9 10% 3 200 m49470r01395mca sm032c395mhn240 3.9 20% 3 200 137 m49470r01475kcn sm032c475khn240 4.7 10% 3 200 138 m49470r01475mcn sm032c475mhn240 4.7 20% 3 200 139 m49470r01565kcn sm032c565khn240 5.6 10% 3 200 140 m49470r01565mcn sm032c565mhn240 5.6 20% 3 200 141 m49470r01685kcn sm032c685khn360 6.8 10% 3 200 142 m49470r01685mcn sm032c685mhn360 6.8 20% 3 200 143 m49470r01825kcn sm032c825khn360 8.2 10% 3 200 144 m49470r01825mcn sm032c825mhn360 8.2 20% 3 200 145 m49470r01106kcn sm032c106khn480 10 10% 3 200 146 m49470r01106mcn sm032c106mhn480 10 20% 3 200 147 m49470r01126kcn sm032c126khn650 12 10% 3 200 148 m49470r01126mcn sm032c126mhn650 12 20% 3 200 m49470r01126kca sm022c126khn240 12 10% 2 200 m49470r01126mca sm022c126mhn240 12 20% 2 200 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) 149 m49470r01156kcn sm012c156khn360 15 10% 1 200 150 m49470r01156mcn sm012c156mhn360 15 20% 1 200 m49470r01156kca sm022c156khn240 15 10% 2 200 m49470r01156mca sm022c156mhn240 15 20% 2 200 151 m49470r01186kcn sm012c186khn480 18 10% 1 200 152 m49470r01186mcn sm012c186mhn480 18 20% 1 200 m49470r01186kca sm022c186khn360 18 10% 2 200 m49470r01186mca sm022c186mhn360 18 20% 2 200 153 m49470r01226kcn sm012c226khn650 22 10% 1 200 154 m49470r01226mcn sm012c226mhn650 22 20% 1 200 m49470r01226kca sm022c226khn360 22 10% 2 200 m49470r01226mca sm022c226mhn360 22 20% 2 200 155 m49470r01276kcn sm012c276khn650 27 10% 1 200 156 m49470r01276mcn sm012c276mhn650 27 20% 1 200 m49470r01276kca sm022c276khn480 27 10% 2 200 m49470r01276mca sm022c276mhn480 27 20% 2 200 157 m49470r01336kcn sm022c336khn480 33 10% 2 200 158 m49470r01336mcn sm022c336mhn480 33 20% 2 200 159 m49470r01396kcn sm022c396khn650 39 10% 2 200 160 m49470r01396mcn sm022c396mhn650 39 20% 2 200 161 m49470r01476kcn sm062c476khn240 47 10% 6 200 162 m49470r01476mcn sm062c476mhn240 47 20% 6 200 163 m49470r01566kcn sm062c566khn360 56 10% 6 200 164 m49470r01566mcn sm062c566mhn360 56 20% 6 200 165 m49470r01686kcn sm062c686khn360 68 10% 6 200 166 m49470r01686mcn sm062c686mhn360 68 20% 6 200 167 m49470r01826kcn sm062c826khn480 82 10% 6 200 168 m49470r01826mcn sm062c826mhn480 82 20% 6 200 169 m49470r01107kcn sm062c107khn650 100 10% 6 200 170 m49470r01107mcn sm062c107mhn650 100 20% 6 200 171 m49470r01127kcn sm062c127khn650 120 10% 6 200 172 m49470r01127mcn sm062c127mhn650 120 20% 6 200 173 m49470q01154ken sm057c154khn120 0.15 10% 5 500 174 m49470q01154men sm057c154mhn120 0.15 20% 5 500 175 m49470q01184ken sm057c184khn240 0.18 10% 5 500 176 m49470q01184men sm057c184mhn240 0.18 20% 5 500 177 m49470q01224ken sm057c224khn240 0.22 10% 5 500 178 m49470q01224men sm057c224mhn240 0.22 20% 5 500 179 m49470q01274ken sm057c274khn240 0.27 10% 5 500 180 m49470q01274men sm057c274mhn240 0.27 20% 5 500 181 m49470q01334ken sm057c334khn360 0.33 10% 5 500 182 m49470q01334men sm057c334mhn360 0.33 20% 5 500 183 m49470q01394ken sm057c394khn360 0.39 10% 5 500 184 m49470q01394men sm057c394mhn360 0.39 20% 5 500 185 m49470q01474ken sm057c474khn360 0.47 10% 5 500 186 m49470q01474men sm057c474mhn360 0.47 20% 5 500 187 m49470q01564ken sm057c564khn480 0.56 10% 5 500 188 m49470q01564men sm057c564mhn480 0.56 20% 5 500 m49470q01564kea sm047c564khn240 0.56 10% 4 500 m49470q01564mea sm047c564mhn240 0.56 20% 4 500 189 m49470q01684ken sm057c684khn650 0.68 10% 5 500 190 m49470q01684men sm057c684mhn650 0.68 20% 5 500 m49470q01684kea sm047c684khn360 0.68 10% 4 500 m49470q01684mea sm047c684mhn360 0.68 20% 4 500 191 m49470q01105ken sm047c105khn360 1.0 10% 4 500 192 m49470q01105men sm047c105mhn360 1.0 20% 4 500 193 m49470q01125ken sm047c125khn360 1.2 10% 4 500 194 m49470q01125men sm047c125mhn360 1.2 20% 4 500 195 m49470q01155ken sm047c155khn480 1.5 10% 4 500 196 m49470q01155men sm047c155mhn480 1.5 20% 4 500 197 m49470q01185ken sm047c185khn650 1.8 10% 4 500 198 m49470q01185men sm047c185mhn650 1.8 20% 4 500
17 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) 247 m49470x01185kaj sm055c185khj240 1.8 10% 5 50 248 m49470x01185maj sm055c185mhj240 1.8 20% 5 50 249 m49470x01225kaj sm055c225khj240 2.2 10% 5 50 250 m49470x01225maj sm055c225mhj240 2.2 20% 5 50 251 m49470x01275kaj sm055c275khj360 2.7 10% 5 50 252 m49470x01275maj sm055c275mhj360 2.7 20% 5 50 253 m49470x01335kaj sm055c335khj360 3.3 10% 5 50 254 m49470x01335maj sm055c335mhj360 3.3 20% 5 50 255 m49470x01395kaj sm055c395khj480 3.9 10% 5 50 256 m49470x01395maj sm055c395mhj480 3.9 20% 5 50 257 m49470x01475kaj sm055c475khj480 4.7 10% 5 50 258 m49470x01475maj sm055c475mhj480 4.7 20% 5 50 m49470x01475kac sm045c475khj240 4.7 10% 4 50 m49470x01475mac sm045c475mhj240 4.7 20% 4 50 259 m49470x01565kaj sm055c565khj650 5.6 10% 5 50 260 m49470x01565maj sm055c565mhj650 5.6 20% 5 50 m49470x01565kac sm045c565khj240 5.6 10% 4 50 m49470x01565mac sm045c565mhj240 5.6 10% 4 50 261 m49470x01685kaj sm045c685khj360 6.8 10% 4 50 262 m49470x01685maj sm045c685mhj360 6.8 20% 4 50 263 m49470x01825kaj sm045c825khj360 8.2 10% 4 50 264 m49470x01825maj sm045c825mhj360 8.2 20% 4 50 265 m49470x01106kaj sm045c106khj480 10 10% 4 50 266 m49470x01106maj sm045c106mhj480 10 20% 4 50 267 m49470x01126kaj sm045c126khj480 12 10% 4 50 268 m49470x01126maj sm045c126mhj480 12 20% 4 50 269 m49470x01156kaj sm045c156khj650 15 10% 4 50 270 m49470x01156maj sm045c156mhj650 15 20% 4 50 m49470x01156kac sm035c156khj240 15 10% 3 50 m49470x01156mac sm035c156mhj240 15 20% 3 50 271 m49470x01186kaj sm035c186khj240 18 10% 3 50 272 m49470x01186maj sm035c186mhj240 18 20% 3 50 273 m49470x01226kaj sm035c226khj360 22 10% 3 50 274 m49470x01226maj sm035c226mhj360 22 20% 3 50 275 m49470x01276kaj sm035c276khj360 27 10% 3 50 276 m49470x01276maj sm035c276mhj360 27 20% 3 50 277 m49470x01336kaj sm035c336khj360 33 10% 3 50 278 m49470x01336maj sm035c336mhj360 33 20% 3 50 279 m49470x01396kaj sm035c396khj480 39 10% 3 50 280 m49470x01396maj sm035c396mhj480 39 20% 3 50 281 m49470x01476kaj sm035c476khj650 47 10% 3 50 282 m49470x01476maj sm035c476mhj650 47 20% 3 50 m49470x01476kac sm025c476khj240 47 10% 2 50 m49470x01476mac sm025c476mhj240 47 20% 2 50 283 m49470x01566kaj sm015c566khj360 56 10% 1 50 284 m49470x01566maj sm015c566mhj360 56 20% 1 50 m49470x01566kac sm025c566khj240 56 10% 2 50 m49470x01566mac sm025c566mhj240 56 20% 2 50 285 m49470x01686kaj sm015c686khj480 68 10% 1 50 286 m49470x01686maj sm015c686mhj480 68 20% 1 50 m49470x01686kac sm025c686khj360 68 10% 2 50 m49470x01686mac sm025c686mhj360 68 20% 2 50 287 m49470x01826kaj sm015c826khj480 82 10% 1 50 288 m49470x01826maj sm015c826mhj480 82 20% 1 50 m49470x01826kac sm025c826khj360 82 10% 2 50 m49470x01826mac sm025c826mhj360 82 20% 2 50 289 m49470x01107kaj sm015c107khj650 100 10% 1 50 290 m49470x01107maj sm015c107mhj650 100 20% 1 50 m49470x01107kac sm025c107khj480 100 10% 2 50 m49470x01107mac sm025c107mhj480 100 20% 2 50 291 m49470x01127kaj sm025c127khj480 120 10% 2 50 292 m49470x01127maj sm025c127mhj480 120 20% 2 50 smps stacked mlc capacitors (sm style) sm military styles mil-prf-49470 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) m49470q01185kea sm037c185khn240 1.8 10% 3 500 m49470q01185mea sm037c185mhn240 1.8 20% 3 500 199 m49470q01275ken sm037c275khn360 2.7 10% 3 500 200 m49470q01275men sm037c275mhn360 2.7 20% 3 500 201 m49470q01335ken sm037c335khn360 3.3 10% 3 500 202 m49470q01335men sm037c335mhn360 3.3 20% 3 500 203 m49470q01395ken sm037c395khn360 3.9 10% 3 500 204 m49470q01395men sm037c395mhn360 3.9 20% 3 500 205 m49470q01475ken sm037c475khn480 4.7 10% 3 500 206 m49470q01475men sm037c475mhn480 4.7 20% 3 500 207 m49470q01565ken sm037c565khn650 5.6 10% 3 500 208 m49470q01565men sm037c565mhn650 5.6 20% 3 500 m49470q01565kea sm027c565khn240 5.6 10% 2 500 m49470q01565mea sm027c565mhn240 5.6 20% 2 500 209 m49470q01825ken sm017c825khn480 8.2 10% 1 500 210 m49470q01825men sm017c825mhn480 8.2 20% 1 500 m49470q01825kea sm027c825khn360 8.2 10% 2 500 m49470q01825mea sm027c825mhn360 8.2 20% 2 500 211 m49470q01106ken sm017c106khn480 10 10% 1 500 212 m49470q01106men sm017c106mhn480 10 20% 1 500 m49470q01106kea sm027c106khn360 10 10% 2 500 m49470q01106mea sm027c106mhn360 10 20% 2 500 213 m49470q01126ken sm017c126khn650 12 10% 1 500 214 m49470q01126men sm017c126mhn650 12 20% 1 500 m49470q01126kea sm027c126khn480 12 10% 2 500 m49470q01126mea sm027c126mhn480 12 20% 2 500 215 m49470q01186ken sm027c186khn650 18 10% 2 500 216 m49470q01186men sm027c186mhn650 18 20% 2 500 217 m49470q01276ken sm067c276khn360 27 10% 6 500 218 m49470q01276men sm067c276mhn360 27 20% 6 500 219 m49470q01336ken sm067c336khn480 33 10% 6 500 220 m49470q01336men sm067c336mhn480 33 20% 6 500 221 m49470q01396ken sm067c396khn650 39 10% 6 500 222 m49470q01396men sm067c396mhn650 39 20% 6 500 223 m49470x01685kan sm045c685khn360 6.8 10% 4 50 224 m49470x01685man sm045c685mhn360 6.8 20% 4 50 225 m49470x01566kan sm015c566khn360 56 10% 1 50 226 m49470x01566man sm015c566mhn360 56 20% 1 50 m49470x01566kaa sm025c566khn240 56 10% 2 50 m49470x01566maa sm025c566mhn240 56 20% 2 50 227 m49470x01127kan sm025c127khn480 120 10% 2 50 228 m49470x01127man sm025c127mhn480 120 20% 2 50 229 m49470x01106kbn sm031c106khn240 10 10% 3 100 230 m49470x01106mbn sm031c106mhn240 10 20% 3 100 231 m49470q01824ken sm047c824khn360 0.82 10% 4 500 232 m49470q01824men sm047c824mhn360 0.82 20% 4 500 233 m49470q01225ken sm037c225khn240 2.2 10% 3 500 234 m49470q01225men sm037c225mhn240 2.2 20% 3 500 235 m49470q01685ken sm017c685khn480 6.8 10% 1 500 236 m49470q01685men sm017c685mhn480 6.8 20% 1 500 m49470q01685kea sm027c685khn240 6.8 10% 2 500 m49470q01685mea sm027c685mhn240 6.8 20% 2 500 237 m49470q01156ken sm027c156khn650 15 10% 2 500 238 m49470q01156men sm027c156mhn650 15 20% 2 500 239 m49470q01226ken sm067c226khn360 22 10% 6 500 240 m49470q01226men sm067c226mhn360 22 20% 6 500 241 m49470x01105kaj sm055c105khj120 1.0 10% 5 50 242 m49470x01105maj sm055c105mhj120 1.0 20% 5 50 243 m49470x01125kaj sm055c125khj120 1.2 10% 5 50 244 m49470x01125maj sm055c125mhj120 1.2 20% 5 50 245 m49470x01155kaj sm055c155khj240 1.5 10% 5 50 246 m49470x01155maj sm055c155mhj240 1.5 20% 5 50
18 smps stacked mlc capacitors (sm style) sm military styles mil-prf-49470 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) 293 m49470x01157kaj sm025c157khj650 150 10% 2 50 294 m49470x01157maj sm025c157mhj650 150 20% 2 50 295 m49470x01187kaj sm065c187khj480 180 10% 6 50 296 m49470x01187maj sm065c187mhj480 180 20% 6 50 297 m49470x01227kaj sm065c227khj480 220 10% 6 50 298 m49470x01227maj sm065c227mhj480 220 20% 6 50 299 m49470x01277kaj sm065c277khj650 270 10% 6 50 300 m49470x01277maj sm065c277mhj650 270 20% 6 50 301 m49470x01684kbj sm051c684khj120 0.68 10% 5 100 302 m49470x01684mbj sm051c684mhj120 0.68 20% 5 100 303 m49470x01824kbj sm051c824khj240 0.82 10% 5 100 304 m49470x01824mbj sm051c824mhj240 0.82 20% 5 100 305 m49470x01105kbj sm051c105khj240 1.0 10% 5 100 306 m49470x01105mbj sm051c105mhj240 1.0 20% 5 100 307 m49470x01125kbj sm051c125khj240 1.2 10% 5 100 308 m49470x01125mbj sm051c125mhj240 1.2 20% 5 100 309 m49470x01155kbj sm051c155khj360 1.5 10% 5 100 310 m49470x01155mbj sm051c155mhj360 1.5 20% 5 100 311 m49470x01185kbj sm051c185khj360 1.8 10% 5 100 312 m49470x01185mbj sm051c185mhj360 1.8 20% 5 100 313 m49470x01225kbj sm051c225khj480 2.2 10% 5 100 314 m49470x01225mbj sm051c225mhj480 2.2 20% 5 100 m49470x01225kbc sm041c225khj240 2.2 10% 4 100 m49470x01225mbc sm041c225mhj240 2.2 20% 4 100 315 m49470x01275kbj sm051c275khj480 2.7 10% 5 100 316 m49470x01275mbj sm051c275mhj480 2.7 20% 5 100 317 m49470x01335kbj sm051c335khj650 3.3 10% 5 100 318 m49470x01335mbj sm051c335mhj650 3.3 20% 5 100 m49470x01335kbc sm041c335khj240 3.3 10% 4 100 m49470x01335mbc sm041c335mhj240 3.3 20% 4 100 319 m49470x01395kbj sm041c395khj360 3.9 10% 4 100 320 m49470x01395mbj sm041c395mhj360 3.9 20% 4 100 321 m49470x01475kbj sm041c475khj360 4.7 10% 4 100 322 m49470x01475mbj sm041c475mhj360 4.7 20% 4 100 323 m49470x01565kbj sm041c565khj480 5.6 10% 4 100 324 m49470x01565mbj sm041c565mhj480 5.6 20% 4 100 325 m49470x01685kbj sm041c685khj480 6.8 10% 4 100 326 m49470x01685mbj sm041c685mhj480 6.8 20% 4 100 327 m49470x01825kbj sm041c825khj650 8.2 10% 4 100 328 m49470x01825mbj sm041c825mhj650 8.2 20% 4 100 m49470x01825kbc sm031c825khj240 8.2 10% 3 100 m49470x01825mbc sm031c825mhj240 8.2 20% 3 100 329 m49470x01106kbj sm031c106khj240 10 10% 3 100 330 m49470x01106mbj sm031c106mhj240 10 20% 3 100 331 m49470x01126kbj sm031c126khj240 12 10% 3 100 332 m49470x01126mbj sm031c126mhj240 12 20% 3 100 333 m49470x01156kbj sm031c156khj360 15 10% 3 100 334 m49470x01156mbj sm031c156mhj360 15 20% 3 100 335 m49470x01186kbj sm031c186khj360 18 10% 3 100 336 m49470x01186mbj sm031c186mhj360 18 20% 3 100 337 m49470x01226kbj sm031c226khj480 22 10% 3 100 338 m49470x01226mbj sm031c226mhj480 22 20% 3 100 339 m49470x01276kbj sm031c276khj650 27 10% 3 100 340 m49470x01276mbj sm031c276mhj650 27 20% 3 100 m49470x01276kbc sm021c276khj240 27 10% 2 100 m49470x01276mbc sm021c276mhj240 27 20% 2 100 341 m49470x01336kbj sm011c336khj360 33 10% 1 100 342 m49470x01336mbj sm011c336mhj360 33 20% 1 100 m49470x01336kbc sm021c336khj240 33 10% 2 100 m49470x01336mbc sm021c336mhj240 33 20% 2 100 343 m49470x01396kbj sm011c396khj480 39 10% 1 100 344 m49470x01396mbj sm011c396mhj480 39 20% 1 100 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) m49470x01396kbc sm021c396khj360 39 10% 2 100 m49470x01396mbc sm021c396mhj360 39 20% 2 100 345 m49470x01476kbj sm011c476khj480 47 10% 1 100 346 m49470x01476mbj sm011c476mhj480 47 20% 1 100 m49470x01476kbc sm021c476khj360 47 10% 2 100 m49470x01476mbc sm021c476mhj360 47 20% 2 100 347 m49470x01566kbj sm011c566khj650 56 10% 1 100 348 m49470x01566mbj sm011c566mhj650 56 20% 1 100 349 m49470x01686kbj sm021c686khj480 68 10% 2 100 350 m49470x01686mbj sm021c686mhj480 68 20% 2 100 351 m49470x01826kbj sm021c826khj650 82 10% 2 100 352 m49470x01826mbj sm021c826mhj650 82 20% 2 100 353 m49470x01107kbj sm061c107khj360 100 10% 6 100 354 m49470x01107mbj sm061c107mhj360 100 20% 6 100 355 m49470x01127kbj sm061c127khj360 120 10% 6 100 356 m49470x01127mbj sm061c127mhj360 120 20% 6 100 357 m49470x01157kbj sm061c157khj480 150 10% 6 100 358 m49470x01157mbj sm061c157mhj480 150 20% 6 100 359 m49470x01187kbj sm061c187khj650 180 10% 6 100 360 m49470x01187mbj sm061c187mhj650 180 20% 6 100 361 m49470r01474kcj sm052c474khj240 0.47 10% 5 200 362 m49470r01474mcj sm052c474mhj240 0.47 20% 5 200 363 m49470r01564kcj sm052c564khj240 0.56 10% 5 200 364 m49470r01564mcj sm052c564mhj240 0.56 20% 5 200 365 m49470r01684kcj sm052c684khj360 0.68 10% 5 200 366 m49470r01684mcj sm052c684mhj360 0.68 20% 5 200 367 m49470r01824kcj sm052c824khj360 0.82 10% 5 200 368 m49470r01824mcj sm052c824mhj360 0.82 20% 5 200 369 m49470r01105kcj sm052c105khj480 1.0 10% 5 200 370 m49470r01105mcj sm052c105mhj480 1.0 20% 5 200 m49470r01105kcc sm042c105khj120 1.0 10% 4 200 m49470r01105mcc sm042c105mhj120 1.0 20% 4 200 371 m49470r01125kcj sm052c125khj480 1.2 10% 5 200 372 m49470r01125mcj sm052c125mhj480 1.2 20% 5 200 m49470r01125kcc sm042c125khj240 1.2 10% 4 200 m49470r01125mcc sm042c125mhj240 1.2 20% 4 200 373 m49470r01155kcj sm052c155khj650 1.5 10% 5 200 374 m49470r01155mcj sm052c155mhj650 1.5 20% 5 200 m49470r01155kcc sm042c155khj230 1.5 10% 4 200 m49470r01155mcc sm042c155mhj230 1.5 20% 4 200 375 m49470r01185kcj sm042c185khj360 1.8 10% 4 200 376 m49470r01185mcj sm042c185mhj360 1.8 20% 4 200 377 m49470r01225kcj sm042c225khj360 2.2 10% 4 200 378 m49470r01225mcj sm042c225mhj360 2.2 20% 4 200 379 m49470r01275kcj sm042c275khj480 2.7 10% 4 200 380 m49470r01275mcj sm042c275mhj480 2.7 20% 4 200 381 m49470r01335kcj sm042c335khj480 3.3 10% 4 200 382 m49470r01335mcj sm042c335mhj480 3.3 20% 4 200 383 m49470r01395kcj sm042c395khj650 3.9 10% 4 200 384 m49470r01395mcj sm042c395mhj650 3.9 20% 4 200 m49470r01395kcc sm032c395khj240 3.9 10% 3 200 m49470r01395mcc sm032c395mhj240 3.9 20% 3 200 385 m49470r01475kcj sm032c475khj240 4.7 10% 3 200 386 m49470r01475mcj sm032c475mhj240 4.7 20% 3 200 387 m49470r01565kcj sm032c565khj240 5.6 10% 3 200 388 m49470r01565mcj sm032c565mhj240 5.6 20% 3 200 389 m49470r01685kcj sm032c685khj360 6.8 10% 3 200 390 m49470r01685mcj sm032c685mhj360 6.8 20% 3 200 391 m49470r01825kcj sm032c825khj360 8.2 10% 3 200 392 m49470r01825mcj sm032c825mhj360 8.2 20% 3 200 393 m49470r01106kcj sm032c106khj480 10 10% 3 200 394 m49470r01106mcj sm032c106mhj480 10 20% 3 200
19 smps stacked mlc capacitors (sm style) sm military styles mil-prf-49470 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) 443 m49470q01125kej sm047c125khj360 1.2 10% 4 500 444 m49470q01125mej sm047c125mhj360 1.2 20% 4 500 445 m49470q01155kej sm047c155khj480 1.5 10% 4 500 446 m49470q01155mej sm047c155mhj480 1.5 20% 4 500 447 m49470q01185kej sm047c185khj650 1.8 10% 4 500 448 m49470q01185mej sm047c185mhj650 1.8 20% 4 500 m49470q01185kec sm037c185khj240 1.8 10% 3 500 m49470q01185mec sm037c185mhj240 1.8 20% 3 500 449 m49470q01225kej sm037c225khj240 2.2 10% 3 500 450 m49470q01225mej sm037c225mhj240 2.2 20% 3 500 451 m49470q01275kej sm037c275khj360 2.7 10% 3 500 452 m49470q01275mej sm037c275mhj360 2.7 20% 3 500 453 m49470q01335kej sm037c335khj360 3.3 10% 3 500 454 m49470q01335mej sm037c335mhj360 3.3 20% 3 500 455 m49470q01395kej sm037c395khj360 3.9 10% 3 500 456 m49470q01395mej sm037c395mhj360 3.9 20% 3 500 457 m49470q01475kej sm037c475khj480 4.7 10% 3 500 458 m49470q01475mej sm037c475mhj480 4.7 20% 3 500 459 m49470q01565kej sm037c565khj650 5.6 10% 3 500 460 m49470q01565mej sm037c565mhj650 5.6 20% 3 500 m49470q01565kec sm027c565khj240 5.6 10% 2 500 m49470q01565mec sm027c565mhj240 5.6 20% 2 500 461 m49470q01685kej sm017c685khj480 6.8 10% 1 500 462 m49470q01685mej sm017c685mhj480 6.8 20% 1 500 m49470q01685kec sm027c685khj240 6.8 10% 2 500 m49470q01685mec sm027c685mhj240 6.8 20% 2 500 463 m49470q01825kej sm017c825khj480 8.2 10% 1 500 464 m49470q01825mej sm017c825mhj480 8.2 20% 1 500 m49470q01825kec sm027c825khj360 8.2 10% 2 500 m49470q01825mec sm027c825mhj360 8.2 20% 2 500 465 m49470q01106kej sm017c106khj480 10 10% 1 500 466 m49470q01106mej sm017c106mhj480 10 20% 1 500 m49470q01106kec sm027c106khj360 10 10% 2 500 m49470q01106mec sm027c106mhj360 10 20% 2 500 467 m49470q01126kej sm017c126khj650 12 10% 1 500 468 m49470q01126kej sm017c126khj650 12 10% 1 500 m49470q01126mec sm027c126mhj480 12 20% 2 500 m49470q01126mec sm027c126mhj480 12 20% 2 500 469 m49470q01156kej sm027c156khj650 15 10% 2 500 470 m49470q01156mej sm027c156mhj650 15 20% 2 500 471 m49470q01186kej sm027c186khj650 18 10% 2 500 472 m49470q01186mej sm027c186mhj650 18 20% 2 500 473 m49470q01226kej sm067c226khj360 22 10% 6 500 474 m49470q01226mej sm067c226mhj360 22 20% 6 500 475 m49470q01276kej sm067c276khj360 27 10% 6 500 476 m49470q01276mej sm067c276mhj360 27 20% 6 500 477 m49470q01336kej sm067c336khj480 33 10% 6 500 478 m49470q01336mej sm067c336mhj480 33 20% 6 500 479 m49470q01396kej sm067c396khj650 39 10% 6 500 480 m49470q01396mej sm067c396mhj650 39 20% 6 500 87106- mil-prf-49470 pin avx part number cap tol case volt (f) code (vdc) 395 m49470r01126kcj sm032c126khj650 12 10% 3 200 396 m49470r01126mcj sm032c126mhj650 12 20% 3 200 m49470r01126kcc sm022c126khj240 12 10% 2 200 m49470r01126mcc sm022c126mhj240 12 20% 2 200 397 m49470r01156kcj sm012c156khj360 15 10% 1 200 398 m49470r01156mcj sm012c156mhj360 15 20% 1 200 m49470r01156kcc sm022c156khj240 15 10% 2 200 m49470r01156mcc sm022c156mhj240 15 20% 2 200 399 m49470r01186kcj sm012c186khj480 18 10% 1 200 400 m49470r01186mcj sm012c186mhj480 18 20% 1 200 m49470r01186kcc sm022c186khj360 18 10% 2 200 m49470r01186mcc sm022c186mhj360 18 20% 2 200 401 m49470r01226kcj sm012c226khj650 22 10% 1 200 402 m49470r01226mcj sm012c226mhj650 22 20% 1 200 m49470r01226kcc sm022c226khj360 22 10% 2 200 m49470r01226mcc sm022c226mhj360 22 20% 2 200 403 m49470r01276kcj sm012c276khj650 27 10% 1 200 404 m49470r01276mcj sm012c276mhj650 27 20% 1 200 m49470r01276kcc sm022c276khj480 27 10% 2 200 m49470r01276mcc sm022c276mhj480 27 20% 2 200 405 m49470r01336kcj sm022c336khj480 33 10% 2 200 406 m49470r01336mcj sm022c336mhj480 33 20% 2 200 407 m49470r01396kcj sm022c396khj650 39 10% 2 200 408 m49470r01396mcj sm022c396mhj650 39 20% 2 200 409 m49470r01476kcj sm062c476khj240 47 10% 6 200 410 m49470r01476mcj sm062c476mhj240 47 20% 6 200 411 m49470r01566kcj sm062c566khj360 56 10% 6 200 412 m49470r01566mcj sm062c566mhj360 56 20% 6 200 413 m49470r01686kcj sm062c686khj360 68 10% 6 200 414 m49470r01686mcj sm062c686mhj360 68 20% 6 200 415 m49470r01826kcj sm062c826khj480 82 10% 6 200 416 m49470r01826mcj sm062c826mhj480 82 20% 6 200 417 m49470r01107kcj sm062c107khj650 100 10% 6 200 418 m49470r01107mcj sm062c107mhj650 100 20% 6 200 419 m49470r01127kcj sm062c127khj650 120 10% 6 200 420 m49470r01127mcj sm062c127mhj650 120 20% 6 200 421 m49470q01154kej sm057c154khj120 0.15 10% 5 500 422 m49470q01154mej sm057c154mhj120 0.15 20% 5 500 423 m49470q01184kej sm057c184khj240 0.18 10% 5 500 424 m49470q01184mej sm057c184mhj240 0.18 20% 5 500 425 m49470q01224kej sm057c224khj240 0.22 10% 5 500 426 m49470q01224mej sm057c224mhj240 0.22 20% 5 500 427 m49470q01274kej sm057c274khj240 0.27 10% 5 500 428 m49470q01274mej sm057c274mhj240 0.27 20% 5 500 429 m49470q01334kej sm057c334khj360 0.33 10% 5 500 430 m49470q01334mej sm057c334mhj360 0.33 20% 5 500 431 m49470q01394kej sm057c394khj360 0.39 10% 5 500 432 m49470q01394mej sm057c394mhj360 0.39 20% 5 500 433 m49470q01474kej sm057c474khj360 0.47 10% 5 500 434 m49470q01474mej sm057c474mhj360 0.47 20% 5 500 435 m49470q01564kej sm057c564khj480 0.56 10% 5 500 436 m49470q01564mej sm057c564mhj480 0.56 20% 5 500 m49470q01564kec sm047c564khj240 0.56 10% 4 500 m49470q01564mec sm047c564mhj240 0.56 20% 4 500 437 m49470q01684kej sm057c684khj650 0.68 10% 5 500 438 m49470q01684mej sm057c684mhj650 0.68 20% 5 500 m49470q01684kec sm047c684khj240 0.68 10% 4 500 m49470q01684mec sm047c684mhj240 0.68 20% 4 500 439 m49470q01824kej sm047c824khj360 0.82 10% 4 500 440 m49470q01824mej sm047c824mhj360 0.82 20% 4 500 441 m49470q01105kej sm047c105khj360 1.0 10% 4 500 442 m49470q01105mej sm047c105mhj360 1.0 20% 4 500
20 smps stacked mlc capacitors (sm style) sm military styles dscc dwg. #87106 & #88011 0.254 (0.010) rad. typ. 1.778 (0.070) 0.254 (0.010) 1.905 (0.075) 0.635 (0.025) typ. schematic case a (max.) b (max.) no. of leads code (see note 2) (see note 2) c .635 (0.025) d .635 (0.025) e (max.) per side 1 16.5 (0.650) 18.2 (0.715) 11.4 (0.450) 52.1 (2.050) 12.7 (0.500) 20 2 16.5 (0.650) 18.2 (0.715) 20.3 (0.800) 38.4 (1.510) 22.1 (0.870) 15 3 16.5 (0.650) 18.2 (0.715) 11.4 (0.450) 26.7 (1.050) 12.7 (0.500) 10 4 16.5 (0.650) 18.2 (0.715) 10.2 (0.400) 10.2 (0.400) 11.2 (0.440) 4 5 16.5 (0.650) 18.2 (0.715) 6.35 (0.250) 6.35 (0.250) 7.62 (0.300) 3 6 16.5 (0.650) 18.2 (0.715) 31.8 (1.250) 52.1 (2.050) 34.3 (1.350) 20 notes: 1. unless otherwise specified, tolerances 0.254 (0.010). 2. a dimensions are maximum (see tables on pages 23 thru 26 for specific part number dimensions). 3. n straight leads; j leads formed in. 4. for case code 5, dimensions shall be 2.54 (0.100) maximum, 0.305 (0.012) minimum. d a b 0.508 (0.020) ty p . 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) 6.35 (0.250) min. e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. j style leads dimensions millimeters (inches) n style leads (note 4)
21 smps stacked mlc capacitors (sm style) sm military styles dscc dwg. #87106 & #88011 ordering information part number: the complete part number shall be as follows: x7r: 87106 xxx _________________ ______________ drawing number dash number (see list) ordering data. the contract or purchase order should specify the following: a. complete part number. b. requirements for delivery of one copy of the quality con- formance inspection data with each shipment of parts by the manufacturer. c. whether the manufacturer performs the group b tests, or provides certification of compliance with group b require- ments. d. requirements for notification of change of products to acquiring activity, if applicable. e. requirements for packaging and packing. source of supply. vendor cage vendor name number and address _____________ _________________________ 96095 olean advanced products a division of avx corporation 1695 seneca avenue olean, ny 14760 performance characteristics operating temperature range. the operating temperature range shall be -55c to +125c. electrical characteristics. rated voltage. see tables on pages 23, 24, 25 & 26. capacitance. measured in accordance with method 305 of mil-std-202 (1khz at 1.0vrms, open circuit voltage, at +25c). dissipation factor (+25c). x7r: dissipation factor shall be 2.5 percent maximum (measured under the same conditions as capacitance.) c0g: dissipation factor shall be 0.15 percent maximum. temperature coefficient. dscc dwg. bias = 0 volt bias = rated voltage 88011 all voltages 030 ppm/c 030 ppm/c 87106 50 w vdc 15% +15, -25% and 100 wvdc 87106 200 wvdc 15% +15, -40% 87106 500 wvdc 15% +15, -50% insulation resistance. at +25c, rated voltage: 100k m or 1,000 m-f, whichever is less. at +125c, rated voltage: 10k m or 100 m-f, whichever is less. dielectric withstanding voltage. dielectric withstanding volt- age shall be 250 percent of rated voltage except 500v rated parts at 150 percent of rated voltage. capacitance tolerance. j = 5 percent, k = 10 percent, m = 20 percent. solderability of terminals. in accordance with mil-prf- 49470. resistance to soldering heat. in accordance with mil-std- 202, method 210, condition b, for 20 seconds. shock. in accordance with mil-prf-49470. immersion cycling. in accordance with mil-prf-49470. moisture resistance. in accordance with mil-prf-49470. life. life shall be 200 percent of rated voltage except 500v rated parts at 120 percent of rated voltage applied at +125c for 1,000 hours. thermal shock. mil-std-202, method 107, test condition a, except high temperature is +125c. voltage conditioning. in accordance with mil-prf-49470, except 500v rated parts at 120 percent of rated voltage at +125c. terminal strength. mil-std-202, method 211, condition b, except that each lead shall be bent away from the body 90 degrees from the original position and back, two bends. marking. marking shall be in accordance with mil-std-1285, except the part number shall be as specified in paragraph 1.2 of 87106, or 88011 with the manufacturers name or code and date code minimum, except case sizes 4 and 5 shall be marked with coded cap and tolerance minimum. full marking shall be included on the package.
22 requirement test method inspection paragraph of paragraph of sampling procedure mil-prf-49470 mil-prf-49470 subgroup 1 thermal shock and voltage conditioning 1 / 3.9 4.8.5 100% inspection subgroup 2 visual and mechanical examination: material 3.4 4.8.4 physical dimensions 3.1 13 samples interface requirements 3.5 and 3.5.1 0 failures (other than physical dimensions) marking 2 /3.28 workmanship 3.30 smps stacked mlc capacitors (sm style) dscc #87106 and #88011 table ii. group a inspection. 1 / post checks are required (see paragraph 3.9 of mil-prf-49470). 2 / marking defects are based on visual examination only. any subsequent electrical defects shall not be used as a basis for determining marking defects. requirement test method number of number of inspection paragraph of paragraph of sample units defectives mil-prf-49470 mil-prf-49470 to be inspected permitted 2 / subgroup 1 3 / temperature coefficient 4 / 4 / resistance to solvents 5 / 6 / 3.23 4.8.20 immersion 3.18 4.8.15 12 1 terminal strength 5 / 3.24 4.8.10 subgroup 2 resistance to soldering heat 3.20 4.8.17 12 1 6 / 1 moisture resistance 3.21 4.8.18 subgroup 3 marking legibility 3.28.1 4.8.4.1 6 1 (laser marking only) subgroup 4 solderability 3.15 4.8.12 3 0 subgroup 5 life 3.26 4.8.22 5 minimum 0 per case code 1 / unless otherwise specified herein, when necessary, mounting of group b samples shall be at the discretion of the manufacturer. 2 / a sample unit having one or more defects shall be charged as a single defective. 3 / order of tests is at discretion of manufacturer. 4 / see 3.2.3 of dscc 87106. 5 / sample size shall be 3 pieces with zero defectives permitted. 6 / total of one defect allowed for combination of subgroup 1, subgroup 2, and subgroup 3 inspections. table iii. group b inspection. 1 /
23 smps stacked mlc capacitors (sm style) sm military styles dscc dwg. #87106 (x7r) electrical characteristics max. a dscc cap. dwg. value cap. case lead dimension 87106- (f) tol. code style mm (inches) 50v 001 1.0 k 5 n 3.05 (0.120) 002 1.0 m 5 n 3.05 (0.120) 241 1.0 k 5 j 3.05 (0.120) 242 1.0 m 5 j 3.05 (0.120) 003 1.2 k 5 n 3.05 (0.120) 004 1.2 m 5 n 3.05 (0.120) 243 1.2 k 5 j 3.05 (0.120) 244 1.2 m 5 j 3.05 (0.120) 005 1.5 k 5 n 6.10 (0.240) 006 1.5 m 5 n 6.10 (0.240) 245 1.5 k 5 j 6.10 (0.240) 246 1.5 m 5 j 6.10 (0.240) 007 1.8 k 5 n 6.10 (0.240) 008 1.8 m 5 n 6.10 (0.240) 247 1.8 k 5 j 6.10 (0.240) 248 1.8 m 5 j 6.10 (0.240) 009 2.2 k 5 n 6.10 (0.240) 010 2.2 m 5 n 6.10 (0.240) 249 2.2 k 5 j 6.10 (0.240) 250 2.2 m 5 j 6.10 (0.240) 011 2.7 k 5 n 9.14 (0.360) 012 2.7 m 5 n 9.14 (0.360) 251 2.7 k 5 j 9.14 (0.360) 252 2.7 m 5 j 9.14 (0.360) 013 3.3 k 5 n 9.14 (0.360) 014 3.3 m 5 n 9.14 (0.360) 253 3.3 k 5 j 9.14 (0.360) 254 3.3 m 5 j 9.14 (0.360) 015 3.9 k 5 n 12.2 (0.480) 016 3.9 m 5 n 12.2 (0.480) 255 3.9 k 5 j 12.2 (0.480) 256 3.9 m 5 j 12.2 (0.480) 017 4.7 k 5 n 12.2 (0.480) 018 4.7 m 5 n 12.2 (0.480) 257 4.7 k 5 j 12.2 (0.480) 258 4.7 m 5 j 12.2 (0.480) 019 5.6 k 5 n 16.5 (0.650) 020 5.6 m 5 n 16.5 (0.650) 259 5.6 k 5 j 16.5 (0.650) 260 5.6 m 5 j 16.5 (0.650) 223 6.8 k 4 n 9.14 (0.360) 224 6.8 m 4 n 9.14 (0.360) 261 6.8 k 4 j 9.14 (0.360) 262 6.8 m 4 j 9.14 (0.360) 021 8.2 k 4 n 9.14 (0.360) 022 8.2 m 4 n 9.14 (0.360) 263 8.2 k 4 j 9.14 (0.360) 264 8.2 m 4 j 9.14 (0.360) 023 10 k 4 n 12.2 (0.480) 024 10 m 4 n 12.2 (0.480) 265 10 k 4 j 12.2 (0.480) 266 10 m 4 j 12.2 (0.480) 025 12 k 4 n 12.2 (0.480) 026 12 m 4 n 12.2 (0.480) 267 12 k 4 j 12.2 (0.480) 268 12 m 4 j 12.2 (0.480) 027 15 k 4 n 16.5 (0.650) 028 15 m 4 n 16.5 (0.650) 269 15 k 4 j 16.5 (0.650) 270 15 m 4 j 16.5 (0.650) 029 18 k 3 n 6.10 (0.240) 030 18 m 3 n 6.10 (0.240) 271 18 k 3 j 6.10 (0.240) max. a dscc cap. dwg. value cap. case lead dimension 87106- (f) tol. code style mm (inches) 50v 272 18 m 3 j 6.10 (0.240) 272 18 m 3 j 6.10 (0.240) 031 22 k 3 n 9.14 (0.360) 032 22 m 3 n 9.14 (0.360) 273 22 k 3 j 9.14 (0.360) 274 22 m 3 j 9.14 (0.360) 033 27 k 3 n 9.14 (0.360) 034 27 m 3 n 9.14 (0.360) 275 27 k 3 j 9.14 (0.360) 276 27 m 3 j 9.14 (0.360) 035 33 k 3 n 9.14 (0.360) 036 33 m 3 n 9.14 (0.360) 277 33 k 3 j 9.14 (0.360) 278 33 m 3 j 9.14 (0.360) 037 39 k 3 n 12.2 (0.480) 038 39 m 3 n 12.2 (0.480) 279 39 k 3 j 12.2 (0.480) 280 39 m 3 j 12.2 (0.480) 039 47 k 3 n 16.5 (0.650) 040 47 m 3 n 16.5 (0.650) 281 47 k 3 j 16.5 (0.650) 282 47 m 3 j 16.5 (0.650) 225 56 k 1 n 9.14 (0.360) 226 56 m 1 n 9.14 (0.360) 283 56 k 1 j 9.14 (0.360) 284 56 m 1 j 9.14 (0.360) 041 68 k 1 n 12.2 (0.480) 042 68 m 1 n 12.2 (0.480) 285 68 k 1 j 12.2 (0.480) 286 68 m 1 j 12.2 (0.480) 043 82 k 1 n 12.2 (0.480) 044 82 m 1 n 12.2 (0.480) 287 82 k 1 j 12.2 (0.480) 288 82 m 1 j 12.2 (0.480) 045 100 k 1 n 16.5 (0.650) 046 100 m 1 n 16.5 (0.650) 289 100 k 1 j 16.5 (0.650) 290 100 m 1 j 16.5 (0.650) 227 120 k 2 n 12.2 (0.480) 228 120 m 2 n 12.2 (0.480) 291 120 k 2 j 12.2 (0.480) 292 120 m 2 j 12.2 (0.480) 047 150 k 2 n 16.5 (0.650) 048 150 m 2 n 16.5 (0.650) 293 150 k 2 j 16.5 (0.650) 294 150 m 2 j 16.5 (0.650) 049 180 k 6 n 12.2 (0.480) 050 180 m 6 n 12.2 (0.480) 295 180 k 6 j 12.2 (0.480) 296 180 m 6 j 12.2 (0.480) 051 220 k 6 n 12.2 (0.480) 052 220 m 6 n 12.2 (0.480) 297 220 k 6 j 12.2 (0.480) 298 220 m 6 j 12.2 (0.480) 053 270 k 6 n 16.5 (0.650) 054 270 m 6 n 16.5 (0.650) 299 270 k 6 j 16.5 (0.650) 300 270 m 6 j 16.5 (0.650) max. a dscc cap. dwg. value cap. case lead dimension 87106- (f) tol. code style mm (inches) 100v 055 .68 k 5 n 3.05 (0.120) 056 .68 m 5 n 3.05 (0.120) 301 .68 k 5 j 3.05 (0.120) 302 .68 m 5 j 3.05 (0.120) 057 .82 k 5 n 6.10 (0.240) 058 .82 m 5 n 6.10 (0.240) 303 .82 k 5 j 6.10 (0.240) 304 .82 m 5 j 6.10 (0.240) 059 1.0 k 5 n 6.10 (0.240) 060 1.0 m 5 n 6.10 (0.240) 305 1.0 k 5 j 6.10 (0.240) 306 1.0 m 5 j 6.10 (0.240) 061 1.2 k 5 n 6.10 (0.240) 062 1.2 m 5 n 6.10 (0.240) 307 1.2 k 5 j 6.10 (0.240) 308 1.2 m 5 j 6.10 (0.240) 063 1.5 k 5 n 9.14 (0.360) 064 1.5 m 5 n 9.14 (0.360) 309 1.5 k 5 j 9.14 (0.360) 310 1.5 m 5 j 9.14 (0.360) 065 1.8 k 5 n 9.14 (0.360) 066 1.8 m 5 n 9.14 (0.360) 311 1.8 k 5 j 9.14 (0.360) 312 1.8 m 5 j 9.14 (0.360) 067 2.2 k 5 n 12.2 (0.480) 068 2.2 m 5 n 12.2 (0.480) 313 2.2 k 5 j 12.2 (0.480) 314 2.2 m 5 j 12.2 (0.480) 069 2.7 k 5 n 12.2 (0.480) 070 2.7 m 5 n 12.2 (0.480) 315 2.7 k 5 j 12.2 (0.480) 316 2.7 m 5 j 12.2 (0.480) 071 3.3 k 5 n 16.5 (0.650) 072 3.3 m 5 n 16.5 (0.650) 317 3.3 k 5 j 16.5 (0.650) 318 3.3 m 5 j 16.5 (0.650) 073 3.9 k 4 n 9.14 (0.360) 074 3.9 m 4 n 9.14 (0.360) 319 3.9 k 4 j 9.14 (0.360) 320 3.9 m 4 j 9.14 (0.360) 075 4.7 k 4 n 9.14 (0.360) 076 4.7 m 4 n 9.14 (0.360) 321 4.7 k 4 j 9.14 (0.360) 322 4.7 m 4 j 9.14 (0.360) 077 5.6 k 4 n 12.2 (0.480) 078 5.6 m 4 n 12.2 (0.480) 323 5.6 k 4 j 12.2 (0.480) 324 5.6 m 4 j 12.2 (0.480) 079 6.8 k 4 n 12.2 (0.480) 080 6.8 m 4 n 12.2 (0.480) 325 6.8 k 4 j 12.2 (0.480) 326 6.8 m 4 j 12.2 (0.480) 081 8.2 k 4 n 16.5 (0.650) 082 8.2 m 4 n 16.5 (0.650) 327 8.2 k 4 j 16.5 (0.650) 328 8.2 m 4 j 16.5 (0.650) 229 10 k 3 n 6.10 (0.240) 230 10 m 3 n 6.10 (0.240) 329 10 k 3 j 6.10 (0.240) 330 10 m 3 j 6.10 (0.240) 083 12 k 3 n 6.10 (0.240) 084 12 m 3 n 6.10 (0.240) 331 12 k 3 j 6.10 (0.240) 332 12 m 3 j 6.10 (0.240)
24 dscc cap. max. a dwg. value cap. case lead dimension 87106- (f) tol. code style mm (inches) 100v 085 15 k 3 n 9.14 (0.360) 086 15 m 3 n 9.14 (0.360) 333 15 k 3 j 9.14 (0.360) 334 15 m 3 j 9.14 (0.360) 087 18 k 3 n 9.14 (0.360) 088 18 m 3 n 9.14 (0.360) 335 18 k 3 j 9.14 (0.360) 336 18 m 3 j 9.14 (0.360) 089 22 k 3 n 12.2 (0.480) 090 22 m 3 n 12.2 (0.480) 337 22 m 3 k 12.2 (0.480) 338 22 m 3 j 12.2 (0.480) 091 27 k 3 n 16.5 (0.650) 092 27 m 3 n 16.5 (0.650) 339 27 k 3 j 16.5 (0.650) 340 27 m 3 j 16.5 (0.650) 093 33 k 1 n 9.14 (0.360) 094 33 m 1 n 9.14 (0.360) 341 33 k 1 j 9.14 (0.360) 342 33 m 1 j 9.14 (0.360) 095 39 k 1 n 12.2 (0.480) 096 39 m 1 n 12.2 (0.480) 343 39 k 1 j 12.2 (0.480) 344 39 m 1 j 12.2 (0.480) 097 47 k 1 n 12.2 (0.480) 098 47 m 1 n 12.2 (0.480) 345 47 k 1 j 12.2 (0.480) 346 47 m 1 j 12.2 (0.480) 099 56 k 1 n 16.5 (0.650) 100 56 m 1 n 16.5 (0.650) 347 56 k 1 j 16.5 (0.650) 348 56 m 1 j 16.5 (0.650) 101 68 k 2 n 12.2 (0.480) 102 68 m 2 n 12.2 (0.480) 349 68 k 2 j 12.2 (0.480) 350 68 m 2 j 12.2 (0.480) 103 82 k 2 n 16.5 (0.650) 104 82 m 2 n 16.5 (0.650) 351 82 k 2 j 16.5 (0.650) 352 82 m 2 j 16.5 (0.650) 105 100 k 6 n 9.14 (0.360) 106 100 m 6 n 9.14 (0.360) 353 100 k 6 j 9.14 (0.360) 354 100 m 6 j 9.14 (0.360) 107 120 k 6 n 9.14 (0.360) 108 120 m 6 n 9.14 (0.360) 355 120 k 6 j 9.14 (0.360) 356 120 m 6 j 9.14 (0.360) 109 150 k 6 n 12.2 (0.480) 110 150 m 6 n 12.2 (0.480) 357 150 k 6 j 12.2 (0.480) 358 150 m 6 j 12.2 (0.480) 111 180 k 6 n 16.5 (0.650) 112 180 m 6 n 16.5 (0.650) 359 180 k 6 j 16.5 (0.650) 360 180 m 6 j 16.5 (0.650) smps stacked mlc capacitors (sm style) sm military styles dscc dwg. #87106 (x7r) electrical characteristics dscc cap. max. a dwg. value cap. case lead dimension 87106- (f) tol. code style mm (inches) 200v 113 .47 k 5 n 6.10 (0.240) 114 .47 m 5 n 6.10 (0.240) 361 .47 k 5 j 6.10 (0.240) 362 .47 m 5 j 6.10 (0.240) 115 .56 k 5 n 6.10 (0.240) 116 .56 m 5 n 6.10 (0.240) 363 .56 k 5 j 6.10 (0.240) 364 .56 m 5 j 6.10 (0.240) 117 .68 k 5 n 9.14 (0.360) 118 .68 m 5 n 9.14 (0.360) 365 .68 k 5 j 9.14 (0.360) 366 .68 m 5 j 9.14 (0.360) 119 .82 k 5 n 9.14 (0.360) 120 .82 m 5 n 9.14 (0.360) 367 .82 m 5 j 9.14 (0.360) 368 .82 m 5 j 9.14 (0.360) 121 1.0 k 5 n 12.2 (0.480) 122 1.0 m 5 n 12.2 (0.480) 369 1.0 k 5 j 12.2 (0.480) 370 1.0 m 5 j 12.2 (0.480) 123 1.2 k 5 n 12.2 (0.480) 124 1.2 m 5 n 12.2 (0.480) 371 1.2 k 5 j 12.2 (0.480) 372 1.2 m 5 j 12.2 (0.480) 125 1.5 k 5 n 16.5 (0.650) 126 1.5 m 5 n 16.5 (0.650) 373 1.5 k 5 j 16.5 (0.650) 374 1.5 m 5 j 16.5 (0.650) 127 1.8 k 4 n 9.14 (0.360) 128 1.8 m 4 n 9.14 (0.360) 375 1.8 k 4 j 9.14 (0.360) 376 1.8 m 4 j 9.14 (0.360) 129 2.2 k 4 n 9.14 (0.360) 130 2.2 m 4 n 9.14 (0.360) 377 2.2 k 4 j 9.14 (0.360) 378 2.2 m 4 j 9.14 (0.360) 131 2.7 k 4 n 12.2 (0.480) 132 2.7 m 4 n 12.2 (0.480) 379 2.7 k 4 j 12.2 (0.480) 380 2.7 m 4 j 12.2 (0.480) 133 3.3 k 4 n 12.2 (0.480) 134 3.3 m 4 n 12.2 (0.480) 381 3.3 k 4 j 12.2 (0.480) 382 3.3 m 4 j 12.2 (0.480) 135 3.9 k 4 n 16.5 (0.650) 136 3.9 m 4 n 16.5 (0.650) 383 3.9 k 4 j 16.5 (0.650) 384 3.9 m 4 j 16.5 (0.650) 137 4.7 k 3 n 6.10 (0.240) 138 4.7 m 3 n 6.10 (0.240) 385 4.7 k 3 j 6.10 (0.240) 386 4.7 m 3 j 6.10 (0.240) 139 5.6 k 3 n 6.10 (0.240) 140 5.6 m 3 n 6.10 (0.240) 387 5.6 k 3 j 6.10 (0.240) 388 5.6 m 3 j 6.10 (0.240) 141 6.8 k 3 n 9.14 (0.360) 142 6.8 m 3 n 9.14 (0.360) 389 6.8 k 3 j 9.14 (0.360) 390 6.8 m 3 j 9.14 (0.360) 143 8.2 k 3 n 9.14 (0.360) 144 8.2 m 3 n 9.14 (0.360) 391 8.2 k 3 j 9.14 (0.360) 392 8.2 m 3 j 9.14 (0.360) dscc cap. max. a dwg. value cap. case lead dimension 87106- (f) tol. code style mm (inches) 200v 145 10 k 3 n 12.2 (0.480) 146 10 m 3 n 12.2 (0.480) 393 10 k 3 j 12.2 (0.480) 394 10 m 3 j 12.2 (0.480) 147 12 k 3 n 16.5 (0.650) 148 12 m 3 n 16.5 (0.650) 395 12 k 3 j 16.5 (0.650) 396 12 m 3 j 16.5 (0.650) 149 15 k 1 n 9.14 (0.360) 150 15 m 1 n 9.14 (0.360) 397 15 k 1 j 9.14 (0.360) 398 15 m 1 j 9.14 (0.360) 151 18 k 1 n 12.2 (0.480) 152 18 m 1 n 12.2 (0.480) 399 18 k 1 j 12.2 (0.480) 400 18 m 1 j 12.2 (0.480) 153 22 k 1 n 16.5 (0.650) 154 22 m 1 n 16.5 (0.650) 401 22 k 1 j 16.5 (0.650) 402 22 m 1 j 16.5 (0.650) 155 27 k 1 n 16.5 (0.650) 156 27 m 1 n 16.5 (0.650) 403 27 k 1 j 16.5 (0.650) 404 27 m 1 j 16.5 (0.650) 157 33 k 2 n 12.2 (0.480) 158 33 m 2 n 12.2 (0.480) 405 33 k 2 j 12.2 (0.480) 406 33 m 2 j 12.2 (0.480) 159 39 k 2 n 16.5 (0.650) 160 39 m 2 n 16.5 (0.650) 407 39 k 2 j 16.5 (0.650) 408 39 m 2 j 16.5 (0.650) 161 47 k 6 n 6.10 (0.240) 162 47 m 6 n 6.10 (0.240) 409 47 k 6 j 6.10 (0.240) 410 47 m 6 j 6.10 (0.240) 163 56 k 6 n 9.14 (0.360) 164 56 m 6 n 9.14 (0.360) 411 56 k 6 j 9.14 (0.360) 412 56 m 6 j 9.14 (0.360) 165 68 k 6 n 9.14 (0.360) 166 68 m 6 n 9.14 (0.360) 413 68 k 6 j 9.14 (0.360) 414 68 m 6 j 9.14 (0.360) 167 82 k 6 n 12.2 (0.480) 168 82 m 6 n 12.2 (0.480) 415 82 k 6 j 12.2 (0.480) 416 82 m 6 j 12.2 (0.480) 169 100 k 6 n 16.5 (0.650) 170 100 m 6 n 16.5 (0.650) 417 100 k 6 j 16.5 (0.650) 418 100 m 6 j 16.5 (0.650) 171 120 k 6 n 16.5 (0.650) 172 120 m 6 n 16.5 (0.650) 419 120 k 6 j 16.5 (0.650) 420 120 m 6 j 16.5 (0.650)
25 smps stacked mlc capacitors (sm style) sm military styles dscc dwg. #87106 (x7r) electrical characteristics dscc cap. max. a dwg. value cap. case lead dimension 87106- (f) tol. code style mm (inches) 500v 173 .15 k 5 n 3.05 (0.120) 174 .15 m 5 n 3.05 (0.120) 421 .15 k 5 j 3.05 (0.120) 422 .15 m 5 j 3.05 (0.120) 175 .18 k 5 n 6.10 (0.240) 176 .18 m 5 n 6.10 (0.240) 423 .18 k 5 j 6.10 (0.240) 424 .18 m 5 j 6.10 (0.240) 177 .22 k 5 n 6.10 (0.240) 178 .22 m 5 n 6.10 (0.240) 425 .22 k 5 j 6.10 (0.240) 426 .22 m 5 j 6.10 (0.240) 179 .27 k 5 n 6.10 (0.240) 180 .27 m 5 n 6.10 (0.240) 427 .27 k 5 j 6.10 (0.240) 428 .27 m 5 j 6.10 (0.240) 181 .33 k 5 n 9.14 (0.360) 182 .33 m 5 n 9.14 (0.360) 429 .33 k 5 j 9.14 (0.360) 430 .33 m 5 j 9.14 (0.360) 183 .39 k 5 n 9.14 (0.360) 184 .39 m 5 n 9.14 (0.360) 431 .39 k 5 j 9.14 (0.360) 432 .39 m 5 j 9.14 (0.360) 185 .47 k 5 n 9.14 (0.360) 186 .47 m 5 n 9.14 (0.360) 433 .47 k 5 j 9.14 (0.360) 434 .47 m 5 j 9.14 (0.360) 187 .56 k 5 n 12.2 (0.480) 188 .56 m 5 n 12.2 (0.480) 435 .56 k 5 j 12.2 (0.480) 436 .56 m 5 j 12.2 (0.480) 189 .68 k 5 n 16.5 (0.650) 190 .68 m 5 n 16.5 (0.650) 437 .68 k 5 j 16.5 (0.650) 438 .68 m 5 j 16.5 (0.650) 231 .82 k 4 n 9.14 (0.360) 232 .82 m 4 n 9.14 (0.360) 439 .82 k 4 j 9.14 (0.360) 440 .82 m 4 j 9.14 (0.360) 191 1.0 k 4 n 9.14 (0.360) 192 1.0 m 4 n 9.14 (0.360) 441 1.0 k 4 j 9.14 (0.360) 442 1.0 m 4 j 9.14 (0.360) 193 1.2 k 4 n 9.14 (0.360) 194 1.2 m 4 n 9.14 (0.360) 443 1.2 k 4 j 9.14 (0.360) 444 1.2 m 4 j 9.14 (0.360) 195 1.5 k 4 n 12.2 (0.480) 196 1.5 m 4 n 12.2 (0.480) 445 1.5 k 4 j 12.2 (0.480) 446 1.5 m 4 j 12.2 (0.480) 197 1.8 k 4 n 16.5 (0.650) 198 1.8 m 4 n 16.5 (0.650) 447 1.8 k 4 j 16.5 (0.650) 448 1.8 m 4 j 16.5 (0.650) 233 2.2 k 3 n 6.10 (0.240) 234 2.2 m 3 n 6.10 (0.240) 449 2.2 k 3 j 6.10 (0.240) 450 2.2 m 3 j 6.10 (0.240) 199 2.7 k 3 n 9.14 (0.360) 200 2.7 m 3 n 9.14 (0.360) 451 2.7 k 3 j 9.14 (0.360) 452 2.7 m 3 j 9.14 (0.360) dscc cap. max. a dwg. value cap. case lead dimension 87106- (f) tol. code style mm (inches) 500v 201 3.3 k 3 n 9.14 (0.360) 202 3.3 m 3 n 9.14 (0.360) 453 3.3 k 3 j 9.14 (0.360) 454 3.3 m 3 j 9.14 (0.360) 203 3.9 k 3 n 9.14 (0.360) 204 3.9 m 3 n 9.14 (0.360) 455 3.9 k 3 j 9.14 (0.360) 456 3.9 m 3 j 9.14 (0.360) 205 4.7 k 3 n 12.2 (0.480) 206 4.7 m 3 n 12.2 (0.480) 457 4.7 k 3 j 12.2 (0.480) 458 4.7 m 3 j 12.2 (0.480) 207 5.6 k 3 n 16.5 (0.650) 208 5.6 m 3 n 16.5 (0.650) 459 5.6 k 3 j 16.5 (0.650) 460 5.6 m 3 j 16.5 (0.650) 235 6.8 k 1 n 12.2 (0.480) 236 6.8 m 1 n 12.2 (0.480) 461 6.8 k 1 j 12.2 (0.480) 462 6.8 m 1 j 12.2 (0.480) 209 8.2 k 1 n 12.2 (0.480) 210 8.2 m 1 n 12.2 (0.480) 463 8.2 k 1 j 12.2 (0.480) 464 8.2 m 1 j 12.2 (0.480) 211 10 k 1 n 12.2 (0.480) 212 10 m 1 n 12.2 (0.480) 465 10 k 1 j 12.2 (0.480) 466 10 m 1 j 12.2 (0.480) 213 12 k 1 n 16.5 (0.650) 214 12 m 1 n 16.5 (0.650) 467 12 k 1 j 16.5 (0.650) 468 12 m 1 j 16.5 (0.650) 237 15 k 2 n 16.5 (0.650) 238 15 m 2 n 16.5 (0.650) 469 15 k 2 j 16.5 (0.650) 470 15 m 2 j 16.5 (0.650) 215 18 k 2 n 16.5 (0.650) 216 18 m 2 n 16.5 (0.650) 471 18 k 2 j 16.5 (0.650) 472 18 m 2 j 16.5 (0.650) 239 22 k 6 n 9.14 (0.360) 240 22 m 6 n 9.14 (0.360) 473 22 k 6 j 9.14 (0.360) 474 22 m 6 j 9.14 (0.360) 217 27 k 6 n 9.14 (0.360) 218 27 m 6 n 9.14 (0.360) 475 27 k 6 j 9.14 (0.360) 476 27 m 6 j 9.14 (0.360) 219 33 k 6 n 12.2 (0.480) 220 33 m 6 n 12.2 (0.480) 477 33 k 6 j 12.2 (0.480) 478 33 m 6 j 12.2 (0.480) 221 39 k 6 n 16.5 (0.650) 222 39 m 6 n 16.5 (0.650) 479 39 k 6 j 16.5 (0.650) 480 39 m 6 j 16.5 (0.650)
26 dscc cap. max. a dwg. value cap. case lead dimension 88011- (f) tol. code style mm (inches) 50v 001* .056 j 5 n 3.05 (0.120) 002* .056 k 5 n 3.05 (0.120) 003* .068 j 5 n 6.10 (0.240) 004* .068 k 5 n 6.10 (0.240) 005* .082 j 5 n 6.10 (0.240) 006* .082 k 5 n 6.10 (0.240) 007* .10 j 5 n 6.10 (0.240) 008* .10 k 5 n 6.10 (0.240) 009* .12 j 5 n 9.14 (0.360) 010* .12 k 5 n 9.14 (0.360) 011* .15 j 5 n 9.14 (0.360) 012* .15 k 5 n 9.14 (0.360) 013* .18 j 5 n 12.2 (0.480) 014* .18 k 5 n 12.2 (0.480) 015* .22 j 5 n 12.2 (0.480) 016* .22 k 5 n 12.2 (0.480) 017* .27 j 5 n 16.5 (0.650) 018* .27 k 5 n 16.5 (0.650) 019* .33 j 4 n 9.14 (0.360) 020* .33 k 4 n 9.14 (0.360) 021* .39 j 4 n 12.2 (0.480) 022* .39 k 4 n 12.2 (0.480) 023* .47 j 4 n 12.2 (0.480) 024* .47 k 4 n 12.2 (0.480) 025* .56 j 4 n 16.5 (0.650) 026* .56 k 4 n 16.5 (0.650) 027* .68 j 3 n 6.10 (0.240) 028* .68 k 3 n 6.10 (0.240) 029* .82 j 3 n 6.10 (0.240) 030* .82 k 3 n 6.10 (0.240) 031* 1.0 j 3 n 9.14 (0.360) 032* 1.0 k 3 n 9.14 (0.360) 033* 1.2 j 3 n 9.14 (0.360) 034* 1.2 k 3 n 9.14 (0.360) 035* 1.5 j 3 n 12.2 (0.480) 036* 1.5 k 3 n 12.2 (0.480) 037* 1.8 j 3 n 12.2 (0.480) 038* 1.8 k 3 n 12.2 (0.480) 039* 2.2 j 3 n 16.5 (0.650) 040* 2.2 k 3 n 16.5 (0.650) 041* 2.7 j 1 n 9.14 (0.360) 042* 2.7 k 1 n 9.14 (0.360) 043* 3.3 j 1 n 12.2 (0.480) 044* 3.3 k 1 n 12.2 (0.480) 045* 3.9 j 1 n 12.2 (0.480) 046* 3.9 k 1 n 12.2 (0.480) 047* 4.7 j 1 n 16.5 (0.650) 048* 4.7 k 1 n 16.5 (0.650) 049* 5.6 j 2 n 16.5 (0.650) 050* 5.6 k 2 n 16.5 (0.650) 051* 6.8 j 6 n 9.14 (0.360) 052* 6.8 k 6 n 9.14 (0.360) 053* 8.2 j 6 n 9.14 (0.360) 054* 8.2 k 6 n 9.14 (0.360) 055* 10 j 6 n 12.2 (0.480) 056* 10 k 6 n 12.2 (0.480) 057* 12 j 6 n 12.2 (0.480) 058* 12 k 6 n 12.2 (0.480) 059* 15 j 6 n 16.5 (0.650) 060* 15 k 6 n 16.5 (0.650) 100v 061* .047 j 5 n 6.10 (0.240) 062* .047 k 5 n 6.10 (0.240) 063* .056 j 5 n 6.10 (0.240) 064* .056 k 5 n 6.10 (0.240) 065* .068 j 5 n 6.10 (0.240) 066* .068 k 5 n 6.10 (0.240) 067* .082 j 5 n 6.10 (0.240) 068* .082 k 5 n 6.10 (0.240) 069* .10 j 5 n 9.14 (0.360) 070* .10 k 5 n 9.14 (0.360) 071* .12 j 5 n 9.14 (0.360) 072* .12 k 5 n 9.14 (0.360) 073* .15 j 5 n 12.2 (0.480) 074* .15 k 5 n 12.2 (0.480) 075* .18 j 5 n 12.2 (0.480) 076* .18 k 5 n 12.2 (0.480) 077* .22 j 5 n 16.5 (0.650) 078* .22 k 5 n 16.5 (0.650) 079* .27 j 4 n 9.14 (0.360) smps stacked mlc capacitors (sm style) sm military styles dscc dwg. #88011 (c0g) cg (c0g) electrical characteristics per mil-c-20 dscc cap. max. a dwg. value cap. case lead dimension 88011- (f) tol. code style mm (inches) 100v (continued) 080* .27 k 4 n 9.14 (0.360) 081* .33 j 4 n 12.2 (0.480) 082* .33 k 4 n 12.2 (0.480) 083* .39 j 4 n 12.2 (0.480) 084* .39 k 4 n 12.2 (0.480) 085* .47 j 4 n 16.5 (0.650) 086* .47 k 4 n 16.5 (0.650) 087* .56 j 4 n 16.5 (0.650) 088* .56 k 4 n 16.5 (0.650) 089* .68 j 3 n 6.10 (0.240) 090* .68 k 3 n 6.10 (0.240) 091* .82 j 3 n 9.14 (0.360) 092* .82 k 3 n 9.14 (0.360) 093* 1.0 j 3 n 9.14 (0.360) 094* 1.0 k 3 n 9.14 (0.360) 095* 1.2 j 3 n 12.2 (0.480) 096* 1.2 k 3 n 12.2 (0.480) 097* 1.5 j 3 n 12.2 (0.480) 098* 1.5 k 3 n 12.2 (0.480) 099* 1.8 j 3 n 16.5 (0.650) 100* 1.8 k 3 n 16.5 (0.650) 101* 2.2 j 1 n 12.2 (0.480) 102* 2.2 k 1 n 12.2 (0.480) 103* 2.7 j 1 n 12.2 (0.480) 104* 2.7 k 1 n 12.2 (0.480) 105* 3.3 j 1 n 16.5 (0.650) 106* 3.3 k 1 n 16.5 (0.650) 107* 3.9 j 2 n 12.2 (0.480) 108* 3.9 k 2 n 12.2 (0.480) 109* 4.7 j 2 n 16.5 (0.650) 110* 4.7 k 2 n 16.5 (0.650) 111* 5.6 j 6 n 9.14 (0.360) 112* 5.6 k 6 n 9.14 (0.360) 113* 6.8 j 6 n 9.14 (0.360) 114* 6.8 k 6 n 9.14 (0.360) 115* 8.2 j 6 n 12.2 (0.480) 116* 8.2 k 6 n 12.2 (0.480) 117* 10 j 6 n 16.5 (0.650) 118* 10 k 6 n 16.5 (0.650) 119* 12 j 6 n 16.5 (0.650) 120* 12 k 6 n 16.5 (0.650) 200v 121* .022 j 5 n 3.05 (0.120) 122* .022 k 5 n 3.05 (0.120) 123* .027 j 5 n 6.10 (0.240) 124* .027 k 5 n 6.10 (0.240) 125* .033 j 5 n 6.10 (0.240) 126* .033 k 5 n 6.10 (0.240) 127* .039 j 5 n 6.10 (0.240) 128* .039 k 5 n 6.10 (0.240) 129* .047 j 5 n 9.14 (0.360) 130* .047 k 5 n 9.14 (0.360) 131* .056 j 5 n 9.14 (0.360) 132* .056 k 5 n 9.14 (0.360) 133* .068 j 5 n 12.2 (0.480) 134* .068 k 5 n 12.2 (0.480) 135* .082 j 5 n 12.2 (0.480) 136* .082 k 5 n 12.2 (0.480) 137* .10 j 5 n 16.5 (0.650) 138* .10 k 5 n 16.5 (0.650) 139* .12 j 4 n 9.14 (0.360) 140* .12 k 4 n 9.14 (0.360) 141* .15 j 4 n 9.14 (0.360) 142* .15 k 4 n 9.14 (0.360) 143* .18 j 4 n 12.2 (0.480) 144* .18 k 4 n 12.2 (0.480) 145* .22 j 4 n 12.2 (0.480) 146* .22 k 4 n 12.2 (0.480) 147* .27 j 4 n 16.5 (0.650) 148* .27 k 4 n 16.5 (0.650) 149* .33 j 3 n 6.10 (0.240) 150* .33 k 3 n 6.10 (0.240) 151* .39 j 3 n 6.10 (0.240) 152* .39 k 3 n 6.10 (0.240) 153* .47 j 3 n 9.14 (0.360) 154* .47 k 3 n 9.14 (0.360) 155* .56 j 3 n 9.14 (0.360) 156* .56 k 3 n 9.14 (0.360) 157* .68 j 3 n 12.2 (0.480) 158* .68 k 3 n 12.2 (0.480) dscc cap. max. a dwg. value cap. case lead dimension 88011- (f) tol. code style mm (inches) 200v (continued) 159* .82 j 3 n 16.5 (0.650) 160* .82 k 3 n 16.5 (0.650) 161* 1.0 j 3 n 16.5 (0.650) 162* 1.0 k 3 n 16.5 (0.650) 163* 1.2 j 1 n 12.2 (0.480) 164* 1.2 k 1 n 12.2 (0.480) 165* 1.5 j 1 n 12.2 (0.480) 166* 1.5 k 1 n 12.2 (0.480) 167* 1.8 j 1 n 16.5 (0.650) 168* 1.8 k 1 n 16.5 (0.650) 169* 2.2 j 2 n 12.2 (0.480) 170* 2.2 k 2 n 12.2 (0.480) 171* 2.7 j 2 n 16.5 (0.650) 172* 2.7 k 2 n 16.5 (0.650) 173* 3.3 j 6 n 9.14 (0.360) 174* 3.3 k 6 n 9.14 (0.360) 175* 3.9 j 6 n 9.14 (0.360) 176* 3.9 k 6 n 9.14 (0.360) 177* 4.7 j 6 n 12.2 (0.480) 178* 4.7 k 6 n 12.2 (0.480) 179* 5.6 j 6 n 16.5 (0.650) 180* 5.6 k 6 n 16.5 (0.650) 500v 181* .010 j 5 n 3.05 (0.120) 182* .010 k 5 n 3.05 (0.120) 183* .012 j 5 n 6.10 (0.240) 184* .012 k 5 n 6.10 (0.240) 185* .015 j 5 n 6.10 (0.240) 186* .015 k 5 n 6.10 (0.240) 187* .018 j 5 n 6.10 (0.240) 188* .018 k 5 n 6.10 (0.240) 189* .022 j 5 n 9.14 (0.360) 190* .022 k 5 n 9.14 (0.360) 191* .027 j 5 n 9.14 (0.360) 192* .027 k 5 n 9.14 (0.360) 193* .033 j 5 n 12.2 (0.480) 194* .033 k 5 n 12.2 (0.480) 195* .039 j 5 n 12.2 (0.480) 196* .039 k 5 n 12.2 (0.480) 197* .047 j 5 n 16.5 (0.650) 198* .047 k 5 n 16.5 (0.650) 199* .056 j 4 n 9.14 (0.360) 200* .056 k 4 n 9.14 (0.360) 201* .068 j 4 n 9.14 (0.360) 202* .068 k 4 n 9.14 (0.360) 203* .082 j 4 n 12.2 (0.480) 204* .082 k 4 n 12.2 (0.480) 205* .10 j 4 n 12.2 (0.480) 206* .10 k 4 n 12.2 (0.480) 207* .12 j 4 n 16.5 (0.650) 208* .12 k 4 n 16.5 (0.650) 209* .15 j 3 n 6.10 (0.240) 210* .15 k 3 n 6.10 (0.240) 211* .18 j 3 n 6.10 (0.240) 212* .18 k 3 n 6.10 (0.240) 213* .22 j 3 n 9.14 (0.360) 214* .22 k 3 n 9.14 (0.360) 215* .27 j 3 n 9.14 (0.360) 216* .27 k 3 n 9.14 (0.360) 217* .33 j 3 n 12.2 (0.480) 218* .33 k 3 n 12.2 (0.480) 219* .39 j 3 n 16.5 (0.650) 220* .39 k 3 n 16.5 (0.650) 221* .47 j 1 n 9.14 (0.360) 222* .47 k 1 n 9.14 (0.360) 223* .56 j 1 n 12.2 (0.480) 224* .56 k 1 n 12.2 (0.480) 225* .68 j 1 n 12.2 (0.480) 226* .68 k 1 n 12.2 (0.480) 227* .82 j 1 n 16.5 (0.650) 228* .82 k 1 n 16.5 (0.650) 229* 1.0 j 2 n 12.2 (0.480) 230* 1.0 k 2 n 12.2 (0.480) 231* 1.2 j 2 n 16.5 (0.650) 232* 1.2 k 2 n 16.5 (0.650) 233* 1.5 j 6 n 9.14 (0.360) 234* 1.5 k 6 n 9.14 (0.360) 235* 1.8 j 6 n 12.2 (0.480) 236* 1.8 k 6 n 12.2 (0.480) 237* 2.2 j 6 n 16.5 (0.650) 238* 2.2 k 6 n 16.5 (0.650) *add j or l for applicable formed leads
27 smps stacked mlc capacitors (sm9 style) technical information on smps capacitors temperature coefficient c0g: a temperature coefficient - 0 30 ppm/c, -55 to +125c x7r: c temperature coefficient - 15%, -55 to +125c z5u: e temperature coefficient - +22, -56%, +10 to +85c capacitance test (mil-std-202 method 305) c0g: 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r: 25c, 1.00.2 vrms (open circuit voltage) at 1khz z5u: 25c, 0.5 vrms max (open circuit voltage) at 1khz dissipation factor 25c c0g: 0.15% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r: 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz z5u: 3.0% max @ 25c, 0.5 vrms max (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) c0g and x7r: 100k m or 1000 m-f, whichever is less. z5u: 10k m or 1000 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) c0g and x7r: 10k m or 100 m-f, whichever is less. z5u: 1k m or 100 m-f, whichever is less. dielectric withstanding voltage 25c (flash test) c0g and x7r: 250% rated voltage for 5 seconds with 50 ma max charging current. (500 volt units @ 750 vdc) z5u: 200% rated voltage for 5 seconds with 50 ma max charging current. life test (1000 hrs) c0g and x7r: 200% rated voltage at +125c. (500 volt units @ 600 vdc) z5u: 150% rated voltage at +85c moisture resistance (mil-std-202 method 106) c0g, x7r, z5u: ten cycles with no voltage applied. thermal shock (mil-std-202 method 107, condition a) immersion cycling (mil-std-202 method 104, condition b) resistance to solder heat (mil-std-202, method 210, condition b, for 20 seconds) electrical specifications sm9 1 7 c 106 m a n 660 how to o rd er avx styles: sm91, sm92, sm93, sm94, sm95, sm96 avx style size voltage temperature capacitance capacitance test termination height size see 50v = 5 coefficient code tolerance level n = straight lead see table sm9 = plastic dimen- 100v = 1 c0g = a (2 significant c0g: j = 5% a = standard j = leads formed on case sions 200v = 2 x7r = c digits + no. k = 10% b = hi-rel * in page 29 for chart 500v = 7 z5u = e of zeros) m = 20% l = leads formed max cap. 10 pf = 100 x7r: k = 10% out per 100 pf = 101 m = 20% height 1,000 pf = 102 z = +80, -20% 22,000 pf = 223 z5u: z = +80, -20% 220,000 pf = 224 p = gmv (+100, -0%) 1 f = 105 10 f = 106 100 f = 107 note: capacitors with x7r and z5u dielectrics are not intended for applications across ac supply mains or ac line filtering with polarity reversal. contact plant for recommendations. * hi-rel screening for c0g and x7r only. screening consists of 100% group a (b level), subgroup 1 per mil-prf-49470. typical esr performance (m) aluminum low esr solid aluminum mlcc mlcc electrolytic solid tantalum electrolytic smps smps 100f/50v 100f/10v 100f/16v 100f/50v 4.7f/50v esr @ 10khz 300 72 29 3 66 esr @ 50khz 285 67 22 2 23 esr @ 100khz 280 62 20 2.5 15 esr @ 500khz 265 56 18 4 8 esr @ 1mhz 265 56 17 7 7.5 esr @ 5mhz 335 72 17 12.5 8 esr @ 10mhz 560 91 22 20 14 performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant
28 smps stacked mlc capacitors encapsulated in dap (diallyl phthalate) case (sm9 style) d e maximum height (see table) 0.381 (0.015) 0.127 (0.005) 6.35 (0.250) (min.) 0.254 (0.010) typ. c 0.508 (0.020) typ. 2.54 (0.100) centers typ. 4.445 (0.175) max 1.016 (0.040) min e 0.381 (0.015) 0.127 (0.005) maximum height (see table) 4.445 (0.175) max 1.016 (0.040) min 2.54 (0.100) centers typ. 0.508 (0.020)typ. c 1.905 (0.075) 0.635 (0.025) typ. d 0.254 (0.010) rad. typ. 1.778 (0.070) 0.254 (0.010) 0.254 (0.010) typ. c d e no. of leads case code 0.635 (0.025) 0.254 (0.010) +0.000 (0.000) -0.254 (0.010) per side* sm91 11.4 (0.450) 54.7 (2.155) 14.7 (0.580) 20 sm92 20.3 (0.800) 41.0 (1.615) 24.1 (0.950) 15 sm93 11.4 (0.450) 29.3 (1.155) 14.7 (0.580) 10 sm94 10.2 (0.400) 12.3 (0.485) 12.3 (0.485) 4 sm95 6.35 (0.250) 9.02 (0.355) 9.02 (0.355) 3 sm96 31.8 (1.250) 54.7 (2.155) 36.3 (1.430) 20 *leads styles n, j or l available dimensions millimeters (inches) n style leads l style leads e 0.381 (0.015) 0.127 (0.005) maximum height (see table) 4.445 (0.175) max 1.016 (0.040) min 2.54 (0.100) centers typ. 0.508 (0.020) typ. c 1.905 (0.075) 0.635 (0.025) typ. d 0.254 (0.010) rad. typ. 1.778 (0.070) 0.254 (0.010) 0.254 (0.010) typ. j style leads
29 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 1.0 .70 .40 .18 1.2 1.0 .60 .26 .47 .40 .20 .09 27 12 7.0 2.6 41 18 11 4.0 18 6.0 3.6 1.3 84 32 12 ? ? 110 46 34 ? ? 40 15 6.0 ? ? max capacitance (f) available versus style with height of 0.270" - 6.86mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .16 .13 .07 .02 .05 .04 .02 .01 3.2 2.4 1.3 .50 7.5 1.8 1.1 .40 2.8 .68 .40 .16 80 40 24 9.4 12 4.6 3.0 ? ? 4.6 1.8 .72 ? ? 260 140 92 ? ? max capacitance (f) available versus style with height of 0.390" - 9.91mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 2.0 1.4 .80 .36 2.4 2.0 1.2 .52 1.0 .80 .40 .18 54 24 14 5.2 82 36 22 8.0 36 12 7.2 2.6 160 64 24 ? ? 230 92 68 ? ? 80 30 12 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .32 .26 .14 .05 .10 .08 .05 .02 6.4 4.8 2.6 1.0 15 3.6 2.2 .80 5.6 1.3 .80 .32 160 80 48 18 24 9.2 6.0 ? ? 9.2 3.6 1.4 ? ? 520 280 180 ? ? max capacitance (f) available versus style with height of 0.530" - 13.46mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 3.0 2.1 1.2 .54 3.6 3.0 1.8 .78 1.5 1.2 .60 .27 82 36 21 7.8 120 54 33 12 54 18 10 3.9 250 96 36 ? ? 350 130 100 ? ? 120 45 18 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .48 .39 .21 .07 .15 .12 .07 .03 9.6 7.2 3.9 1.5 22 5.4 3.3 1.2 8.2 2.0 1.2 .48 240 120 72 28 36 13 9.0 ? ? 13 5.4 2.1 ? ? 780 430 270 ? ? max capacitance (f) available versus style with height of 0.660" - 16.76mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 4.0 2.8 1.6 .72 4.8 4.0 2.4 1.0 2.0 1.6 .80 .36 110 48 28 10 160 72 44 16 72 24 14 5.2 330 120 48 ? ? 470 180 130 ? ? 160 60 24 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .64 .52 .28 .10 .20 .16 .10 .04 12 9.6 5.2 2.0 30 7.2 4.4 1.6 10 2.7 1.6 .64 320 160 96 37 48 18 12 ? ? 18 7.2 2.8 ? ? 1000 570 360 ? ? max capacitance (f) available versus style with height of 0.800" - 20.3mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 5.0 3.5 2.0 .90 6.0 5.0 3.0 1.3 2.5 2.0 1.0 .47 130 60 35 13 200 90 55 20 90 30 18 6.5 420 160 60 ? ? 590 230 170 ? ? 200 75 30 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .80 .65 .35 .12 .25 .20 .12 .05 16 12 6.5 2.5 36 9.0 5.5 2.0 12 3.4 2.0 .80 400 200 120 47 60 23 15 ? ? 23 9.0 3.6 ? ? 1300 720 460 ? ? sm91 _ _ _ _ _ _ an270 sm92 _ _ _ _ _ _ an270 sm93 _ _ _ _ _ _ an270 sm94 _ _ _ _ _ _ an270 sm95 _ _ _ _ _ _ an270 sm96 _ _ _ _ _ _ an270 avx style c0g x7r z5u sm91 _ _ _ _ _ _ an390 sm92 _ _ _ _ _ _ an390 sm93 _ _ _ _ _ _ an390 sm94 _ _ _ _ _ _ an390 sm95 _ _ _ _ _ _ an390 sm96 _ _ _ _ _ _ an390 avx style c0g x7r z5u sm91 _ _ _ _ _ _ an530 sm92 _ _ _ _ _ _ an530 sm93 _ _ _ _ _ _ an530 sm94 _ _ _ _ _ _ an530 sm95 _ _ _ _ _ _ an530 sm96 _ _ _ _ _ _ an530 avx style c0g x7r z5u sm91 _ _ _ _ _ _ an660 sm92 _ _ _ _ _ _ an660 sm93 _ _ _ _ _ _ an660 sm94 _ _ _ _ _ _ an660 sm95 _ _ _ _ _ _ an660 sm96 _ _ _ _ _ _ an660 avx style c0g x7r z5u sm91 _ _ _ _ _ _ an800 sm92 _ _ _ _ _ _ an800 sm93 _ _ _ _ _ _ an800 sm94 _ _ _ _ _ _ an800 sm95 _ _ _ _ _ _ an800 sm96 _ _ _ _ _ _ an800 avx style c0g x7r z5u smps stacked mlc capacitors encapsulated in dap (diallyl phthalate) case (sm9 style)
30 rohs compliant smps stacked mlc capacitors (rm style) technical information on smps capacitors temperature coefficient c0g: a temperature coefficient - 0 30 ppm/c, -55 to +125c x7r: c temperature coefficient - 15%, -55 to +125c z5u: e temperature coefficient - +22, -56%, +10 to +85c capacitance test (mil-std-202 method 305) c0g: 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r: 25c, 1.00.2 vrms (open circuit voltage) at 1khz z5u: 25c, 0.5 vrms max (open circuit voltage) at 1khz dissipation factor 25c c0g: 0.15% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r: 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz z5u: 3.0% max @ 25c, 0.5 vrms max (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) c0g and x7r: 100k m or 1000 m-f, whichever is less. z5u: 10k m or 1000 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) c0g and x7r: 10k m or 100 m-f, whichever is less. z5u: 1k m or 100 m-f, whichever is less. dielectric withstanding voltage 25c (flash test) c0g and x7r: 250% rated voltage for 5 seconds with 50 ma max charging current. (500 volt units @ 750 vdc) z5u: 200% rated voltage for 5 seconds with 50 ma max charging current. life test (1000 hrs) c0g and x7r: 200% rated voltage at +125c. (500 volt units @ 600 vdc) z5u: 150% rated voltage at +85c moisture resistance (mil-std-202 method 106) c0g, x7r, z5u: ten cycles with no voltage applied. thermal shock (mil-std-202 method 107, condition a) immersion cycling (mil-std-202 method 104, condition b) resistance to solder heat (mil-std-202, method 210, condition b, for 20 seconds) typical esr performance (m) aluminum low esr solid aluminum mlcc mlcc electrolytic solid tantalum electrolytic smps smps 100f/50v 100f/10v 100f/16v 100f/50v 4.7f/50v esr @ 10khz 300 72 29 3 66 esr @ 50khz 285 67 22 2 23 esr @ 100khz 280 62 20 2.5 15 esr @ 500khz 265 56 18 4 8 esr @ 1mhz 265 56 17 7 7.5 esr @ 5mhz 335 72 17 12.5 8 esr @ 10mhz 560 91 22 20 14 electrical specifications how to order avx styles: rm-1, rm-2, rm-3, rm-4, rm-5, rm-6 note: capacitors with x7r and z5u dielectrics are not intended for applications across ac supply mains or ac line filtering wit h polarity reversal. contact plant for recommendations. rm0 avx style rm0 = uncoated rm5 = epoxy coated 1 size see dimensions chart 7 voltage 50v = 5 100v = 1 200v = 2 500v = 7 c temperature coefficient c0g = a x7r = c z5u = e 106 capacitance code (2 significant digits + number of zeros) 10 pf = 100 100 pf = 101 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 1f = 105 10 f = 106 100 f = 107 m capacitance tolerance c0g: j = 5% k = 10% m = 20% x7r: k = 10% m = 20% z = +80%, -20% z5u: m = 20% z = +80%, -20% p = gmv (+100, -0%) a test level a = standard n termination n = straight lead j = leads formed in l = leads formed out p = p style leads z = z style leads 650 height max dimension a 120 = 0.120" 240 = 0.240" 360 = 0.360" 480 = 0.480" 650 = 0.650" performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
31 d a b 0.508 (0.020) ty p . 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) 6.35 (0.250) min. e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. no. of leads style a (max.) b (max.) c .635 (0.025) d .635 (0.025) e (max.) per side rm-1 11.4 (0.450) 52.1 (2.050) 12.7 (0.500) 20 rm-2 20.3 (0.800) 38.4 (1.510) 22.1 (0.870) 15 rm-3 11.4 (0.450) 26.7 (1.050) 12.7 (0.500) 10 rm-4 10.2 (0.400) 10.2 (0.400) 11.2 (0.440) 4 rm-5 6.35 (0.250) 6.35 (0.250) 7.62 (0.300) 3 rm-6 31.8 (1.250) 52.1 (2.050) 34.3 (1.350) 20 note: for rm5 add 0.127 (0.005) to max. and nominal dimensions a, b, d, & e n style leads e c rad. 0.254 (0.010) (typ) detail b 0.254 (0.010) typ. chip separation 0.254 (0.010) typ. 1.270 0.254 (0.050 0.010) 2.794 0.254 (0.110 0.010) 1.778 0.254 (0.070 0.010) 3.048 0.381 (0.120 0.015) detail b z style leads e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. b detail a 4.191 0.254 (0.165 0.010) 1.651 0.254 (0.065 0.010) 2.540 0.254 (0.100 0.010) 6.350 (0.250) min 1.016 0.254 (0.040 0.010) r 0.508 (0.020) 3 places capacitor detail a p style leads j style leads dimensions millimeters (inches) see page 32 for maximum a dimension for n style leads: a dimension plus 1.651 (0.065) for j & l style leads: a dimension plus 2.032 (0.080) for p style leads: a dimension plus 4.445 (0.175) for z style leads: a dimension plus 3.048 (0.120) e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.905 (0.075) 0.635 (0.025) typ. 1.778 (0.070) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.778 (0.070) 1.905 (0.075) 0.635 (0.025) typ. 0.254 (0.010) l style leads rohs compliant smps stacked mlc capacitors (rm style) surface mount and thru-hole sytles (rm0, rm5)
32 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 1.0 .70 .40 .18 1.2 1.0 .60 .26 .47 .40 .20 .09 27 12 7.0 2.6 41 18 11 4.0 18 6.0 3.6 1.3 84 32 12 ? ? 110 46 34 ? ? 40 15 6.0 ? ? max capacitance (f) available versus style with height (a) of 0.120" - 3.05mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .16 .13 .07 .02 .05 .04 .02 .01 3.2 2.4 1.3 .50 7.5 1.8 1.1 .40 2.8 .68 .40 .16 80 40 24 9.4 12 4.6 3.0 ? ? 4.6 1.8 .72 ? ? 260 140 92 ? ? max capacitance (f) available versus style with height (a) of 0.240" - 6.10mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 2.0 1.4 .80 .36 2.4 2.0 1.2 .52 1.0 .80 .40 .18 54 24 14 5.2 82 36 22 8.0 36 12 7.2 2.6 160 64 24 ? ? 230 92 68 ? ? 80 30 12 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .32 .26 .14 .05 .10 .08 .05 .02 6.4 4.8 2.6 1.0 15 3.6 2.2 .80 5.6 1.3 .80 .32 160 80 48 18 24 9.2 6.0 ? ? 9.2 3.6 1.4 ? ? 520 280 180 ? ? max capacitance (f) available versus style with height (a) of 0.360" - 9.14mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 3.0 2.1 1.2 .54 3.6 3.0 1.8 .78 1.5 1.2 .60 .27 82 36 21 7.8 120 54 33 12 54 18 10 3.9 250 96 36 ? ? 350 130 100 ? ? 120 45 18 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .48 .39 .21 .07 .15 .12 .07 .03 9.6 7.2 3.9 1.5 22 5.4 3.3 1.2 8.2 2.0 1.2 .48 240 120 72 28 36 13 9.0 ? ? 13 5.4 2.1 ? ? 780 430 270 ? ? max capacitance (f) available versus style with height (a) of 0.480" - 12.2mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 4.0 2.8 1.6 .72 4.8 4.0 2.2 1.0 2.0 1.6 .80 .36 110 48 28 10 160 72 44 16 72 24 14 5.2 330 120 48 ? ? 470 180 130 ? ? 160 60 24 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .64 .52 .28 .10 .20 .16 .10 .04 12 9.6 5.2 2.0 30 7.2 4.4 1.6 10 2.7 1.6 .64 320 160 96 37 48 18 12 ? ? 18 7.2 2.8 ? ? 1000 570 360 ? ? max capacitance (f) available versus style with height (a) of 0.650" - 16.5mm 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v 5.0 3.5 2.0 .90 6.0 5.0 3.0 1.3 2.5 2.0 1.0 .47 130 60 35 13 200 90 55 20 90 30 18 6.5 420 160 60 ? ? 590 230 170 ? ? 200 75 30 ? ? 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v .80 .65 .35 .12 .25 .20 .12 .05 16 12 6.5 2.5 36 9.0 5.5 2.0 12 3.4 2.0 .80 400 200 120 47 60 23 15 ? ? 23 9.0 3.6 ? ? 1300 720 460 ? ? rm01 _ _ _ _ _ _ an120 rm02 _ _ _ _ _ _ an120 rm03 _ _ _ _ _ _ an120 rm04 _ _ _ _ _ _ an120 rm05 _ _ _ _ _ _ an120 rm06 _ _ _ _ _ _ an120 avx style c0g x7r z5u rm01 _ _ _ _ _ _ an240 rm02 _ _ _ _ _ _ an240 rm03 _ _ _ _ _ _ an240 rm04 _ _ _ _ _ _ an240 rm05 _ _ _ _ _ _ an240 rm06 _ _ _ _ _ _ an240 avx style c0g x7r z5u rm01 _ _ _ _ _ _ an360 rm02 _ _ _ _ _ _ an360 rm03 _ _ _ _ _ _ an360 rm04 _ _ _ _ _ _ an360 rm05 _ _ _ _ _ _ an360 rm06 _ _ _ _ _ _ an360 avx style c0g x7r z5u rm01 _ _ _ _ _ _ an480 rm02 _ _ _ _ _ _ an480 rm03 _ _ _ _ _ _ an480 rm04 _ _ _ _ _ _ an480 rm05 _ _ _ _ _ _ an480 rm06 _ _ _ _ _ _ an480 avx style c0g x7r z5u rm01 _ _ _ _ _ _ an650 rm02 _ _ _ _ _ _ an650 rm03 _ _ _ _ _ _ an650 rm04 _ _ _ _ _ _ an650 rm05 _ _ _ _ _ _ an650 rm06 _ _ _ _ _ _ an650 avx style c0g x7r z5u rohs compliant smps stacked mlc capacitors (rm style)
33 smps stacked mlc capacitors (smm style) extended range temperature coefficient 15%, \ 55oc to +125oc capacitance test (mil-std-202 method 305) 25oc, 1.0 0.2 vrms (open circuit voltage) at 1 khz dissipation factor 25c 2.5% max @ 25oc, 1.0 0.2 vrms (open circuit voltage) at 1 khz insulation resistance 25c (mil-std-202 method 302) 1000 m \ f, whichever is less insulation resistance 125c (mil-std-202 method 302) 1000 m \ f, whichever is less dielectric withstanding voltage 25c (flash test) 250% rated voltage for 5 seconds with 50 ma maximum charging current (500 volt units @ 750 vdc) life test (1000 hrs) 200% rated voltage for at 125c (500 volts units @ 600 vdc) electrical specifications general description the smm series smps capacitors incorporate the super x7r dielectric material. avx smm stacked capacitors offer high dielectric constant (k) characteristics allowing for an extended capacitance range. the higher capacitance values in the smaller case sizes reduce the amount of board space needed to mount these components. the smm series capacitors are designed for use in applications ranging from high end dc/dc convert- ers to general power supplies, telecom networks, snubbers, aerospace instrumentation panels, hybrid power applications and more. * hi-rel screening for consists of 100% group a (b level), subgroup 1 per mil-prf-49470. smm4 avx style smm3 smm4 smm5 5 voltage 50v = 5 100v = 1 200v = 2 500v = 7 c temperature coefficient x7r = c 186 capacitance code (pf - 2 significant digits + number of zeros) 1f = 105 10 f = 106 100 f = 107 m tolerance k = 10% m = 20% a test level a = standard b = hi-rel * j leads n = straight lead k = leads formed in m = leads formed out 120 height max dimension a 120 = 0.120" 240 = 0.240" 360 = 0.360" 480 = 0.480" 650 = 0.600" how to order
34 d a b 0.508 (0.020) ty p . 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) 6.35 (0.250) min. e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.905 (0.075) 0.635 (0.025) typ. 1.778 (0.070) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.778 (0.070) 1.905 (0.075) 0.635 (0.025) typ. 0.254 (0.010) m style leads k style leads n style leads no. of leads style a (max.) b (max.) c .635 (0.025) d .635 (0.025) e (max.) per side smm3 11.4 (0.450) 26.7 (1.050) 12.7 (0.500) 10 smm4 10.2 (0.400) 10.2 (0.400) 11.2 (0.440) 4 smm5 6.35 (0.250) 6.35 (0.250) 7.62 (0.300) 3 dimensions capacitance range millimeters (inches) see next table below for maximum a dimension for n style leads: a dimension plus 1.651 (0.065) for k & m style leads: a dimension plus 2.032 (0.080) avx style smm3 smm4 smm5 50v 100v 200v 500v 50v 100v 200v 500v 50v 100v 200v 500v height ?a? 0.120" 27 15 8.2 3.9 10 4.7 3.3 1.2 3.9 1.8 1.2 0.56 0.240" 56 27 15 6.8 18 8.2 6.8 2.2 6.8 3.3 2.2 1.0 0.360" 82 47 22 12 27 12 10 3.3 12 5.6 3.3 1.6 0.480" 100 56 33 15 39 18 12 4.7 15 6.8 4.7 2.2 0.600" 120 68 39 18 49 22 15 5.6 18 8.2 5.6 2.7 max capacitance (f) available versus style and height (diminsion a) smps stacked mlc capacitors (smm style) extended range
35 smps stacked mlc capacitors smx style for high temperature applications up to 200oc smx-style, stacked switch mode power supply capacitors (smps) utilizing multilayer ceramic (mlcc) construction are ideally suited for high temperature applications up to 200oc. this product is intended for downhole oil exploration, including logging while drilling, geophysical probes, as well as space and aerospace electronics. the high temperature solder utilized in the construction of smx-style parts assures reliable operation in harsh environments. the wide product offering provides designers a solution for high capacitance value and high voltage capaci- tors rated at 200oc. the smx-style capacitors are ideally suited for applications as dc filters in high power, high frequency motor drives, high pulsed-current circuitry, as well as low power electronics. smx-style, smps capacitors are characterized with excellent performance in comparison to wet tantalum products. the main benefits of smx-product over wet tantalum capacitors include: ? much lower esr and lower losses ? excellent capacitance retention with frequency ? excellent high frequency performance ? low dc leakage current ? much higher current handling capabilities typical extended temperature tcc characterization of c0g, smps capacitors test conditions: 1 vrms, 1 khz, 0 vdc bias -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 -75 -50 -25 0 25 50 75 100 125 150 175 200 temperature (oc) percentage capacitance change rc product ( *f) typical extended temperature ir characterization of c0g, smps capacitors 10 100 1000 10000 120 130 140 150 160 170 180 190 200 temperature (oc) rc product ( *f) typical extended temperature ir characterization of x7r/x9u, smps capacitors temperature (oc) 1 10 100 1000 10000 120 130 140 150 160 170 180 190 200 typical extended temperature tcc characterization of x7r/x9u, smps capacitors test conditions: 1 vrms, 1 khz, 0 vdc bias temperature (oc) -100 -80 -60 -40 -20 0 20 -75 -50 -25 0 25 50 75 100 125 150 175 200 percentage capacitance change
36 smps stacked mlc capacitors smx style for high temperature applications up to 200oc temperature coefficient c0g: a temperature coefficient 0 30 ppm/c, -55 to +200c x7r/x9u: c temperature coefficient 15%, -55c to +125c +15% - 56%, -55oc to +200c capacitance test (mil-std-202 method 305) 25c, 1.00.2 vrms (open circuit voltage) at 1khz dissipation factor 25c c0g: 0.15% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r/x9u: 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) 100k m or 1000 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) 10k m or 100 m-f, whichever is less. insulation resistance 200c (mil-std-202 method 302) 100 m or 1 m -f, whichever is less. dielectric withstanding voltage 25c (flash test) 250% rated voltage for 5 seconds with 50 ma max charging current. (500 volt units @ 750 vdc) moisture resistance (mil-std-202 method 106) ten cycles with no voltage applied. thermal shock (mil-std-202 method 107, condition a) immersion cycling (mil-std-202 method 104, condition b) resistance to solder heat (mil-std-202, method 210, condition b, for 20 seconds) electrical specifications note: capacitors with x7r/x9u dielectric is not intended for applications across ac supply mains or ac line filtering with pola rity reversal. contact plant for recommendations. smx avx style smx = uncoated 1 size see dimensions chart 7 voltage 25 = 3 50v = 5 100v = 1 200v = 2 500v = 7 c temperature coefficient c0g = a x7r/x9u = c 106 capacitance code (2 significant digits + number of zeros) 10 pf = 100 100 pf = 101 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 1f = 105 10 f = 106 100 f = 107 m capacitance tolerance c0g: j = 5% k = 10% m = 20% x7r: k = 10% m = 20% z = +80%, -20% a test level a = standard n termination n = straight lead j = leads formed in l = leads formed out p = p style leads z = z style leads 650 height max dimension a 120 = 0.120" 240 = 0.240" 360 = 0.360" 480 = 0.480" 650 = 0.650" how to order avx styles: smx1, smx2, smx3, smx4, smx5, smx6 not rohs compliant
37 smps stacked mlc capacitors smx style for high temperature applications up to 200oc d a b 0.508 (0.020) ty p . 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) 6.35 (0.250) min. e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. n style leads e c rad. 0.254 (0.010) (typ) detail b 0.254 (0.010) typ. chip separation 0.254 (0.010) typ. 1.270 0.254 (0.050 0.010) 2.794 0.254 (0.110 0.010) 1.778 0.254 (0.070 0.010) 3.048 0.381 (0.120 0.015) detail b z style leads e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. b detail a 4.191 0.254 (0.165 0.010) 1.651 0.254 (0.065 0.010) 2.540 0.254 (0.100 0.010) 6.350 (0.250) min 1.016 0.254 (0.040 0.010) r 0.508 (0.020) 3 places capacitor detail a p style leads j style leads e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.905 (0.075) 0.635 (0.025) typ. 1.778 (0.070) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.778 (0.070) 1.905 (0.075) 0.635 (0.025) typ. 0.254 (0.010) l style leads no. of leads style a (max.) b (max.) c .635 (0.025) d .635 (0.025) e (max.) per side smx1 11.4 (0.450) 52.1 (2.050) 12.7 (0.500) 20 smx2 20.3 (0.800) 38.4 (1.510) 22.1 (0.870) 15 smx3 11.4 (0.450) 26.7 (1.050) 12.7 (0.500) 10 smx4 10.2 (0.400) 10.2 (0.400) 11.2 (0.440) 4 smx5 6.35 (0.250) 6.35 (0.250) 7.62 (0.300) 3 smx6 31.8 (1.250) 52.1 (2.050) 34.3 (1.350) 20 dimensions millimeters (inches) see page 38 for maximum a dimension for n style leads: a dimension plus 1.651 (0.065) for j & l style leads: a dimension plus 2.032 (0.080) for p style leads: a dimension plus 4.445 (0.175) for z style leads: a dimension plus 3.048 (0.120)
38 smps stacked mlc capacitors smx style for high temperature applications up to 200oc max capacitance (f) available versus style with height (a) of 0.120" - 3.05mm avx smx1 _ _ _ _ _ _ an120 smx2 _ _ _ _ _ _ an120 smx3 _ _ _ _ _ _ an120 smx4 _ _ _ _ _ _ an120 s mx5 _ _ _ _ _ _ an120 smx6 _ _ _ _ _ _ an120 style 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v c0g 1.0 .70 .40 .18 .068 1.2 1.0 .60 .26 .10 .50 .40 .20 .09 .033 .16 .13 .07 .02 .01 .05 .04 .02 .01 .0039 3.2 2.4 1.3 .50 .20 x7r/x9u 22 12 7.0 2.6 1.0 33 18 11 4.0 1.5 11 6.0 3.6 1.3 .50 3.3 1.8 1.1 .40 .15 1.2 .68 .40 .16 .056 68 40 24 9.4 3.3 avx smx1 _ _ _ _ _ _ an650 smx2 _ _ _ _ _ _ an650 smx3 _ _ _ _ _ _ an650 smx4 _ _ _ _ _ _ an650 s mx5 _ _ _ _ _ _ an650 smx6 _ _ _ _ _ _ an650 style 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v c0g 5.0 3.5 2.0 .90 .34 6.0 5.0 3.0 1.3 .50 2.5 2.0 1.0 .45 .160 .82 .65 .35 .12 .05 .25 .20 .12 .05 .019 16 12 6.5 2.5 1.0 x7r/x9u 110 60 35 13 5.0 160 90 55 20 7.5 56 30 18 6.5 2.5 16 9.0 5.5 2.0 .80 6.0 3.4 2.0 .80 .28 340 200 120 47 16 avx smx1 _ _ _ _ _ _ an480 smx2 _ _ _ _ _ _ an480 smx3 _ _ _ _ _ _ an480 smx4 _ _ _ _ _ _ an480 s mx5 _ _ _ _ _ _ an480 smx6 _ _ _ _ _ _ an480 style 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v c0g 4.0 2.8 1.6 .72 .27 4.8 4.0 2.2 1.0 .40 2.0 1.6 .80 .36 .130 .64 .52 .28 .10 .04 .20 .16 .10 .04 .015 13 9.6 5.2 2.0 .80 x7r/x9u 88 48 28 10 4.0 130 72 44 16 6.0 44 24 14 5.2 2.0 13 7.2 4.4 1.6 .60 4.8 2.7 1.6 .64 .22 270 160 96 37 13 avx smx1 _ _ _ _ _ _ an360 smx2 _ _ _ _ _ _ an360 smx3 _ _ _ _ _ _ an360 smx4 _ _ _ _ _ _ an360 s mx5 _ _ _ _ _ _ an360 smx6 _ _ _ _ _ _ an360 style 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v c0g 3.0 2.1 1.2 .54 .22 3.6 3.0 1.8 .78 .30 1.5 1.2 .60 .27 .10 .48 .39 .21 .07 .03 .15 .12 .07 .03 .011 10 7.2 3.9 1.5 .60 x7r/x9u 68 36 21 7.8 3.0 100 54 33 12 4.5 33 18 10 3.9 1.5 10 5.4 3.3 1.2 .47 3.6 2.0 1.2 .48 .160 200 120 72 28 10 avx smx1 _ _ _ _ _ _ an240 smx2 _ _ _ _ _ _ an240 smx3 _ _ _ _ _ _ an240 smx4 _ _ _ _ _ _ an240 s mx5 _ _ _ _ _ _ an240 smx6 _ _ _ _ _ _ an240 style 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v 25v 50v 100v 200v 500v c0g 2.0 1.4 .80 .36 .13 2.4 2.0 1.2 .52 .20 1.0 .80 .40 .18 .068 .33 .26 .14 .05 .02 .10 .08 .05 .02 .0078 6.4 4.8 2.6 1.0 .40 x7r/x9u 44 24 14 5.2 2.0 66 36 22 8.0 3.0 22 12 7.2 2.6 1.0 6.6 3.6 2.2 .80 .30 2.4 1.3 .80 .32 .110 130 80 48 18 6.6 max capacitance (f) available versus style with height (a) of 0.240" - 6.10mm max capacitance (f) available versus style with height (a) of 0.360" - 9.14mm max capacitance (f) available versus style with height (a) of 0.480" - 12.2mm max capacitance (f) available versus style with height (a) of 0.650" - 16.5mm
39 smps capacitors chip assemblies ch/cv - radial, dual-in-line, 4 terminal/smt j & l ranges 10nf to 180 f bs9100 approved 50v to 500 vdc low esr/esl -55oc to +125oc 1b/c0g and 2c1/x7r dielectrics this range allows smps engineers to select the best volumetric solution for input and output filter applications in high reliability designs. utilizing advanced multilayer ceramic techniques to minimize esr/esl giving high current handling properties appropriate for filtering, smoothing and decoupling circuits. electrical specifications temperature coefficient cecc 30 000, (4.24.1) 1b/c0g: a temperature coefficient - 0 30 ppm/oc, -55o to +125oc 2c1/x7r: c temperature characteristic - 15%, -55o to +125oc capacitance test 25oc 1b/c0g: measured at 1 vrms max at 1khz (1mhz for 100 pf or less) 2c1/x7r: measured at 1 vrms max at 1khz dissipation factor 25c 1b/c0g: 0.15% max at 1khz, 1 vrms max (1mhz for 100 pf or less) 2c1/x7r: 2.5% max at 1khz, 1 vrms max insulation resistance 25c 1b/c0g & 2c1/x7r: 100k megohms or 1000 megohms-f, whichever is less dielectric withstanding voltage 25c (flash test) 1b/c0g & 2c1/x7r: 250% rated voltage for 5 seconds with 50 ma max charging current. (500 volt units @ 150% rated voltage) dielectric withstanding voltage 25c (flash test) 1b/c0g & 2c1/x7r: 250% rated voltage for 5 seconds with 50 ma max charging current. (500 volt units @ 150% rated voltage) life test (1000 hrs) cecc 30 000 (4.23) 1b/c0g & 2c1/x7r: 200% rated voltage at +125oc. (500 volt units @ 120% rated voltage) damp heat iec 68-2-3, 56 days. thermal shock iec 68-2-14 -55oc to +125oc, 5 cycles resistance to solder heat iec 68-2-20 vibration iec 68-2-6 10hz - 2000hz, 0.75mm or 98m/sec 2 , 6 hrs. bump iec 68-2-29 390m/sec 2 , 4000 bumps ch and cv 4x, 5x, 81-84 top line a (avx). voltage code, dielectric code. middle line capacitance code, tolerance code. bottom line 6 digit batch code. other ch, cv styles top line avx. second line voltage code, dielectric code. third line capacitance code, tolerance code. bottom line, 6 digit batch code. avx 5c 156m xxxxxx a5c 225k xxxxxx marking performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
40 how to order cv 52 5 c 106 m a 3 0 a 2 style size voltage dielectric capacitance capacitance specification finish lead dia. lead space lead style code code code code code tolerance code code code code code ( see product section) 5 = 50v a = c0g (2 significant c0g: j = 5% a = non-customized 3 = uncoated 0 = standard a = standard 2 = 2 terminal 1 = 100v c = x7r digits + no. k = 10% 8 = coated 4 = 4 terminal 2 = 200v of zeros) m = 20% (classified as see note 1 7 = 500v eg. 105 = 1 f x7r: k = 10% uninsulated) above 106 = 10 f m = 20% 107 = 100 f p = +100, -0% lhs lead style dia (max) (max) (nom) (nom) cv41-44 10.6 (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028) cv51-54 11.9 (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035) cv61-64 16.5 (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035) cv71-74 17.8 (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035) cv76-79 22.7 (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035) part number format (cvxxxxxxxxxxxa2) typical part number cv525c106ma30a2 vertically mounted radial product smps capacitors (cv style) chip assemblies part number format (cvxxxxxxxxx3xx4) typical part number cv435c106ma30a4 vertically mounted 4 terminal radial product *tolerance 0.8 millimeters (inches) t max. h max. l max. 25 (0.984) 3 (0.118) lead dia. see table s1 0.5 (0.020) s1 0.5 (0.020) m2 m1 = m2 0.5 (0.020) m1 dimensions millimeters (inches) style t max cv41/51/61/71/76 3.80 (0.150) cv42/52/62/72/77 7.40 (0.291) cv43/53/63/73/78 11.1 (0.437) cv44/54/64/74/79 14.8 (0.583) lhs lead style dia (max) (max) (nom) (nom) cv43-44 10.6 (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028) cv53-54 11.9 (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035) cv63-64 16.5 (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035) cv73-74 17.8 (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035) cv78-79 22.7 (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035) *tolerance 0.8 (0.031) millimeters (inches) note 1. this style is only available in 3 & 4 chip assemblies dimensions millimeters (inches) style t max s1 cv43/53/63/73/78 11.1 (0.437) 5.08 (0.200) cv44/54/64/74/79 14.8 (0.583) 7.62 (0.300) t max. h max. 25 (0.984) 3 (0.118) lead dia. see table s 0.5 (0.020) l max. note: see page 132 for how to order bs9100 parts not rohs compliant
41 lw s no. of style leads (max) (max) (nom) per side ch41-44 9.2 (0.362) 8.7 (0.342) 8.2 (0.322) 3 ch51-54 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4 ch61-64 14.9 (0.586) 13.6 (0.535) 14.0 (0.551) 5 ch71-74 16.8 (0.661) 21.6 (0.850) 15.2 (0.600) 7 ch76-79 21.6 (0.850) 16.6 (0.653) 20.3* (0.800) 6 ch81-84 12.0 (0.472) 38.2 (1.503) 10.2 (0.400) 14 ch86-89 18.9 (0.744) 38.2 (1.503) 15.2 (0.600) 14 ch91-94 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14 lws s lead s1 style dia (max) (max) (nom) (nom) (nom) ch42-44 10.6 (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028) 5.08 (0.200) ch52-54 11.9 (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035) 7.62 (0.300) ch62-64 16.5 (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035) 7.62 (0.300) ch72-74 17.8 (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035) 15.2 (0.600) ch77-79 22.7 (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035) 10.2 (0.400) ch82-84 14.1 (0.555) 38.2 (1.503) 10.2 (0.400) 0.9 (0.035) 27.9 (1.100) ch87-89 17.8 (0.700) 38.2 (1.503) 15.2 (0.600) 1.0 (0.039) 27.9 (1.100) ch92-94 22.7 (0.893) 40.6 (1.598) 21.2* (0.834) 1.2 (0.047) 30.5 (1.200) part number format (chxxxxxxxxx3xx4) typical part number ch782c106ma30a4 horizontally mounted 4 terminal radial product smps capacitors (ch style) chip assemblies part number format (chxxxxxxxxxx0a0) typical part number ch615c106ma30a0 horizontally mounted dual-in-line product lead width 0.5 (0.020) lead thickness 0.254 (0.010) l1 = l2 0.5 (0.020) *tolerance 0.8 note: this style is only available in 2, 3 & 4 chip assemblies only millimeters (inches) s 0.5 w max t max m2 25 (0.984) 3 (0.118) lead dia (see table) m1 l max m1 = m2 0.5 (0.020) s1 0.5 (0.020) (0.020) dimensions millimeters (inches) *tolerance 0.8 (0.031) dimensions millimeters (inches) style t max ch42/52/62/72/77/87/92 7.4 (0.291) ch43/53/63/73/78/88/93 11.1 (0.437) ch44/54/64/74/79/89/94 14.8 (0.583) style t max ch41/51/61/71/76/81/86/91 3.8 (0.150) ch42/52/62/72/77/82/87/92 7.4 (0.291) ch43/53/63/73/78/83/88/93 11.1 (0.437) ch44/54/64/74/79/84/89/94 14.8 (0.583) w max t max 2.0 (0.079) max 2.54 (0.100) 0.05 (0.002) l1 l2 l max s 0.5 (0.020) 13 (0.512) 1 (0.039) millimeters (inches) how to order ch 52 5 c 106 m a 3 0 a 0 style size voltage dielectric capacitance capacitance specification finish lead dia. lead space lead style code code code code code tolerance code code code code code ( see product section) 5 = 50v a = c0g (2 significant c0g: j = 5% a = non-customized 3 = uncoated 0 = standard a = standard 0 = straight dual 1 = 100v c = x7r digits + no. k = 10% 8 = coated in line 2 = 200v of zeros) m = 20% (classified as 4 = 4 terminal 7 = 500v eg. 105 = 1 f x7r: k = 10% uninsulated) 106 = 10 f m = 20% 107 = 100 f p = +100, -0% note: see page 132 for how to order bs9100 parts not rohs compliant
42 a = non-customized 3 = uncoated 8 = coated (classified as uninsulated) how to order ch 52 5 c 106 m a 3 0 a 7 style size voltage dielectric capacitance capacitance specification finish lead dia. lead spac e lead style code code code code code tolerance code code code code code ( see product section) 5 = 50v a = c0g (2 significant c0g: j = 5% 0 = standard a = standard 3 = low profile j 1 = 100v c = x7r digits + no. k = 10% (single chip) 2 = 200v of zeros) m = 20% 5 = low profile l 7 = 500v eg. 105 = 1 f x7r: k = 10% (single chip) 106 = 10 f m = 20% 7 = l dual in line 107 = 100 f p = +100, -0% 8 = j dual in line smps capacitors (ch style) chip assemblies part number format (chxxxxxxxxxx0a7) typical part numbe r ch411c275ka30a7 horizontally mounted l lead smt product part number format (chxxxxxxxxxx0a8) typical part numbe r ch411c275ka30a8 horizontally mounted j lead smt product *tolerance 0.8 (0.031) millimeters (inches) millimeters (inches) l max w max t max s 0.5 (0.02) note: a ??lead low pro?e version (ch....0a5) is available with lead height 1.1 (0.043) max. for single chip assemblies eg. ch415c225ma30a5 l1 l2 2.54 (0.1) 0.5 (0.02) 2.54 (0.1) 0.5 (0.02) lead width 0.5 (0.020) lead thickness 0.254 (0.010) l1 = l2 0.5 (0.020) style t max ch41/51/61/71/76/81/86/91 3.8 (0.150) ch42/52/62/72/77/82/87/92 7.4 (0.291) ch43/53/63/73/78/83/88/93 11.1 (0.437) ch44/54/64/74/79/84/89/94 14.8 (0.583) lead width 0.5 (0.020) lead thickness 0.254 (0.010) l1 = l2 0.5 (0.020) style t max ch41/51/61/71/76/81/86/91 3.8 (0.150) ch42/52/62/72/77/82/87/92 7.4 (0.291) ch43/53/63/73/78/83/88/93 11.1 (0.437) ch44/54/64/74/79/84/89/94 14.8 (0.583) lw s no. of style leads (max) (max) (nom) per side ch41-44 9.2 (0.362) 8.7 (0.342) 8.2 (0.322) 3 ch51-54 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4 ch61-64 14.9 (0.586) 13.6 (0.535) 14.0 (0.551) 5 ch71-74 16.8 (0.661) 21.6 (0.850) 15.2 (0.600) 7 ch76-79 21.6 (0.850) 16.6 (0.653) 20.3* (0.800) 6 ch81-84 12.0 (0.472) 38.2 (1.503) 10.2 (0.400) 14 ch86-89 18.9 (0.744) 38.2 (1.503) 15.2 (0.600) 14 ch91-94 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14 dimensions millimeters (inches) t max l max l1 l2 w max note: a ??lead low pro?e version (ch....0a3) is available with lead height 1.1 (0.043) max. for single chip assemblies eg. ch515c475ma30a3 s 0.5 (0.020) 2.54 (0.100) 0.5 (0.020) 2.54 (0.100) 0.5 (0.020) lw s no. of style leads (max) (max) (nom) per side ch41-44 9.2 (0.362) 8.7 (0.342) 8.2 (0.322) 3 ch51-54 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4 ch61-64 14.9 (0.586) 13.6 (0.535) 14.0 (0.551) 5 ch71-74 16.8 (0.661) 21.6 (0.850) 15.2 (0.600) 7 ch76-79 21.6 (0.850) 16.6 (0.653) 20.3* (0.800) 6 ch81-84 12.0 (0.472) 38.2 (1.503) 10.2 (0.400) 14 ch86-89 18.9 (0.744) 38.2 (1.503) 15.2 (0.600) 14 ch91-94 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14 *tolerance 0.8 (0.031) dimensions millimeters (inches) note: see page 132 for how to order bs9100 parts not rohs compliant
43 ch/cv41-44 ch/cv51-54 ch/cv61-64 ch/cv71-74 ch/cv76-79 ch81-84 ch86-89 ch91-94 styles styles styles styles styles styles styles styles voltage dc cap f 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 0.01 41 0.012 41 0.015 41 0.018 41 0.022 42 51 0.027 42 51 0.033 41 42 52 61 0.039 41 42 52 61 0.047 41 41 43 52 61 0.056 41 41 43 52 61 0.068 41 41 41 44 51 53 62 71 76 81 0.082 41 41 42 51 53 62 71 76 81 0.1 41 42 42 51 51 54 62 71 76 81 0.12 42 42 42 51 51 52 61 62 72 77 81 86 0.15 42 42 42 51 52 52 61 61 63 72 77 81 86 0.18 42 42 43 51 52 52 61 61 63 72 77 82 86 0.22 42 43 43 52 52 52 61 61 62 64 71 72 76 77 8 1 82 86 91 0.27 43 43 44 52 52 53 61 62 62 71 71 73 76 76 78 81 81 8 2 87 91 0.33 43 44 52 53 53 61 62 62 71 71 73 76 76 78 81 8 1 82 87 91 0.39 44 52 53 54 62 62 62 71 71 72 74 76 76 77 79 81 81 81 83 86 87 92 0.47 53 54 62 62 63 71 71 72 76 76 77 8 1 81 81 83 86 87 92 0.56 53 62 63 63 71 72 72 76 77 77 81 81 82 84 86 86 88 92 0.68 54 62 63 64 72 72 72 77 77 77 81 82 82 86 86 86 88 92 0.82 63 64 72 72 73 77 77 78 82 82 82 86 86 87 89 91 93 1 63 64 72 72 73 77 77 78 82 82 82 86 87 87 91 91 93 1.2 64 72 73 74 77 78 79 82 82 83 87 87 87 91 91 92 94 1.5 73 73 78 78 82 83 83 87 87 87 91 92 92 1.8 73 74 78 79 83 83 84 87 87 88 92 92 92 2.2 74 79 83 84 87 88 88 92 92 92 2.7 84 88 88 89 92 92 93 3.3 88 89 92 93 93 3.9 89 93 93 94 4.7 93 94 5.6 94 c0g dielectric ultra stable ceramic nb figures in cells refer to size within ordering information smps capacitors (ch/cv style) chip assemblies
44 ch/cv41-44 ch/cv51-54 ch/cv61-64 ch/cv71-74 ch/cv76-79 ch81-84 ch86-89 ch91-94 styles styles styles styles styles styles styles styles voltage dc cap f 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 0.12 41 0.15 41 0.18 41 0.22 41 0.27 42 51 0.33 41 42 51 0.39 41 42 51 0.47 41 42 51 61 0.56 41 43 52 61 0.68 42 43 51 52 61 0.82 42 44 51 52 61 71 76 81 1 41 42 44 51 53 61 62 71 76 81 1.2 41 42 52 53 61 62 71 76 81 1.5 41 43 52 54 61 62 71 76 81 86 1.8 41 41 43 52 61 62 72 77 82 86 2.2 41 41 44 51 52 61 63 71 72 76 77 81 82 86 2.7 41 41 51 53 62 63 71 72 76 77 81 82 87 91 3.3 41 42 51 53 62 64 71 72 76 77 81 82 87 91 3.9 42 42 51 51 54 62 72 73 77 78 81 83 86 87 91 4.7 42 42 51 52 61 62 72 73 77 78 82 83 86 87 91 5.6 42 42 51 52 61 63 72 74 77 79 82 84 86 88 92 6.8 42 43 52 52 61 61 63 72 77 82 86 88 92 8.2 43 43 52 52 61 61 64 71 73 76 78 82 87 89 91 92 10 43 44 52 53 61 62 64 71 73 76 78 83 87 91 92 12 44 53 53 62 62 71 71 74 76 76 79 81 83 87 92 93 15 53 54 62 62 71 71 76 76 81 81 84 86 87 92 93 18 54 62 63 71 72 76 77 81 81 86 88 92 94 22 54 62 63 72 72 77 77 81 82 86 86 88 92 27 63 64 72 72 77 7 7 82 82 86 86 89 93 33 63 64 72 73 77 7 8 82 82 86 87 91 93 39 64 72 73 77 78 82 82 87 87 91 91 94 47 73 74 78 79 82 83 87 87 91 92 56 73 78 83 83 87 87 92 92 68 74 79 83 84 87 88 92 92 82 84 88 88 92 92 100 88 89 92 93 120 89 93 93 150 93 94 180 94 x7r dielectric stable ceramic nb figures in cells refer to size within ordering information smps capacitors (ch/cv style) chip assemblies
45 smps molded radial mlc capacitors sxp style for high temperature applications up to 200oc sxp-style, encapsulated radial leaded mlc capacitors are ideally suited for high temperature applications up to 200oc. this product is intended for downhole oil exploration, including logging while drilling, geophysical probes, as well as space, aerospace and hybrid automotive applications. this product supplements the smx family of capacitors and offers mechanical protection to the ceramic element in extreme harsh environ- ment. the high temperature solder utilized in the construction of sxp- style parts assures reliable operation in high temperature and rugged environments. the sxp-style capacitors are ideally suited for applica- tions as dc filters in high power, high frequency motor drives, high pulsed-current circuitry, as well as standard electronic equipment designed for high temperature applications. sxp-style, switch mode power supply capacitors are characterized with excellent performance. the main benefits of sxp product include: ? low esr, low esl ? low dc leakage ? excellent high frequency performance how to order sxp avx style 3 size see dimensions chart 1 voltage code 50v = 5 100v = 1 200v = 2 500v = 7 1000v = a c temperature coefficient c0g = a x7r/x9u = c 104 capacitance code (2 significant digits + number of zeros) 100 pf = 101 22,000 pf = 223 1f = 105 m capacitance tolerance c0g: j = 5% k = 10% m = 20% x7r: j = 5% k = 10% m = 20% z = +80%, -20% a test level a = standard a leads a = standard sn/pb (min. 5% pb) temperature coefficient c0g: a temperature coefficient 0 30 ppm/c, -55 to +200c x7r/x9u: c temperature coefficient 15%, -55c to +125c +15% - 56%, -55oc to +200c capacitance test (mil-std-202 method 305) 25c, 1.00.2 vrms (open circuit voltage) at 1khz dissipation factor 25c c0g: 0.15% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r/x9u: 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) 100k m or 1000 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) 10k m or 100 m-f, whichever is less. insulation resistance 200c (mil-std-202 method 302) 100 m or 1 m -f, whichever is less. dielectric withstanding voltage 25c (flash test) 250% rated voltage for 5 seconds with 50 ma max charging current. (150% for 500 vdc and 1000 vdc) electrical specifications tighter tolerances available upon request not rohs compliant
46 smps molded radial mlc capacitors sxp style for high temperature applications up to 200oc style dimensions millimeters (inches) capacitance range c0g x7r l t h ld l t ld ls ll avx style length (l) height (h) thickness (t) lead spacing ld 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.76 (0.030) 0.05 (0.002) sxp1 8.9 (0.350) 8.9 (0.350) 5.08 (0.200) 5.08 (0.200) 0.51 (0.020) sxp2 11.4 (0.450) 11.4 (0.450 5.08 (0.200) 5.08 (0.200) 0.51 (0.020) sxp3 12.7 (0.500) 12.7 (0.500) 5.08 (0.200) 10.2 (0.400) 0.64 (0.025) sxp4 22.4 (0.880) 16.3 (0.640) 5.84 (0.230) 19.8 (0.780) 0.81 (0.032) style 50v 100v 200v 500v 1000v sxp1 (min) 1000pf 1000pf 1000pf 100pf 100pf (max) .047f .027f 8200pf 4700pf 2200pf sxp2 (min) .01f 1000pf 1000pf 100pf 100pf (max) .10f .056f .018f 8200pf 4700pf sxp3 (min) .01f 1000pf 1000pf 1000pf 1000pf (max) .15f .068f .022f .012f 6800pf sxp4 (min) .01f .01f 1000pf 1000pf 1000pf (max) .39f .22f .068f .033f .018f style 50v 100v 200v 500v 1000v sxp1 (min) .1f .01f .01f .01f .01f (max) 1.2f .68f .27f .12f .033f sxp2 (min) .1f .1f .01f .01f .01f (max) 2.2f 1.2f .56f .22f .068f sxp3 (min) .01f .1f .01f .01f .01f (max) 3.3f 1.8f .82f .33f .10f sxp4 (min) 1f .1f .1f .01f .01f (max) 10f 5.6f 2.2f 1.0f .27f
47 turbocap tm high-cv smps capacitors the turbocap tm , mlc capacitors from avx corporation are characterized with very high capacitance in a small volume. by vertical stacking of the ceramic elements, the footprint required for mounting the capacitors is greatly reduced. turbocaps tm are ideally suited as filters in the input and output stages of switch mode power supplies (smps). with their ultra-low esr, these capacitors are designed to handle high ripple current at high frequencies and high power levels. the dip leads in either thru-hole or surface mount configurations offer superior stress relief to the ceramic elements. the leads effectively decouple the parts from the board and minimize thermally or mechanically induced stresses encountered during assembly, temperature cycling or other environmental conditions. pwm controller input filter vin output filter vout g v cc fb gnd snubber typical application of turbocap tm smps capacitors for input and output filters in dc/dc converters performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
48 turbocap tm high-cv smps capacitors typical esr performance () 27f 47f 100f esr @ 10khz 0.007 0.004 0.003 esr @ 50khz 0.003 0.002 0.0015 esr @ 100khz 0.002 0.0015 0.001 electrical specifications how to order avx styles: st12 and st20 st12 avx style st12 st20 5 voltage 25v = 3 50v = 5 100v = 1 c temperature coefficient x7r = c 186 capacitance code (2 significant digits + no. of zeros) 1 f = 105 10 f = 106 100 f = 107 m capacitance tolerance m = 20% a test level a = standard n termination n = straight lead j = leads formed in l = leads formed out 03 number of leads per side 03 = 3 05 = 5 10 = 10 capacitance (f) temperature coefficient temperature coefficient 15%, -55 to +125c capacitance test (mil-std-202 method 305) 25c, 1.00.2 vrms (open circuit voltage) at 1khz dissipation factor 25c 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) 500 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) 50 m-f, whichever is less. dielectric withstanding voltage 25c (flash test) 250% rated voltage for 5 seconds with 50 ma max charging current. life test (1000 hrs) x7r: 150% rated voltage at +125c. moisture resistance (mil-std-202 method 106) ten cycles with no voltage applied. thermal shock (mil-std-202 method 107, condition a) immersion cycling (mil-std-202 method 104, condition b) resistance to solder heat (mil-std-202, method 210, condition b, for 20 seconds) st12 st20 voltage cap (f) 50v 100v 25v 50v 100v .82 1.3 2.7 8.2 ...03 12 ...05 14 ...03 18 ...03 22 ...10 ...05 27 ...05 ...03 47 ...05 ...10 50 ...10 68 ...03 100 ...05 ...10 220 ...10 not rohs compliant
49 turbocap tm high-cv smps capacitors d a b 0.508 (0.020) typ. 3, 5 or 10 leads per side 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) c 0.254 (0.010) typ. e 6.35 (0.25) min. n style leads j style leads d a b 0.508 (0.020) typ. 3, 5 or 10 leads per side 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) c 1.397 (0.055) 0.127 (0.005) e 1.778 (0.070) 0.254 (0.010) 0.254 (0.010) rad. typ. b d a b 0.508 (0.020) typ. 3, 5 or 10 leads per side 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) c 1.397 (0.055) 0.127 (0.005) e 1.778 (0.070) 0.254 (0.010) 0.254 (0.010) rad. typ. b l style leads style a (max.) b (max.)* c d (max.) e (max.) lead no. of leads 0.635 ( 0.025) style per side st125c***m*n03 3.56 (0.140) 5.21 (0.205) 5.08 (0.200) 10.8 (0.425) 6.35 (0.250) n 03 st125c***m*n05 3.56 (0.140) 5.21 (0.205) 5.08 (0.200) 15.9 (0.625) 6.35 (0.250) n 05 st125c***m*n10 3.56 (0.140) 5.21 (0.205) 5.08 (0.200) 27.9 (1.100) 6.35 (0.250) n 10 st205c***m*n03 5.59 (0.220) 7.24 (0.285) 6.35 (0.250) 9.5(0.375) 7.62 (0.300) n 03 st205c***m*n05 5.59 (0.220) 7.24 (0.285) 6.35 (0.250) 14.6 (0.575) 7.62 (0.300) n 05 st205c***m*n10 5.59 (0.220) 7.24 (0.285) 6.35 (0.250) 27.3 (1.075) 7.62 (0.300) n 10 dimensions millimeters (inches) *the b dimension is defined for the n style leads. the l and j style leads are 0.381 (0.015) longer. the st12 will be 5 .89 (0.220), the st20 will be 7.62 (0.300).
50 rohs compliant turbocap tm high-cv smps capacitors the rohs compliant turbocap tm , mlc capacitors from avx corporation are characterized with very high capacitance in a small volume. by vertical stacking of the ceramic elements, the footprint required for mounting the capacitors is greatly reduced. turbocaps tm are ideally suited as filters in the input and output stages of switch mode power supplies (smps). with their ultra-low esr, these capacitors are designed to handle high ripple current at high frequencies and high power levels. the dip leads in either thru-hole or surface mount configurations offer superior stress relief to the ceramic elements. the leads effectively decouple the parts from the board and minimize thermally or mechanically induced stresses encountered during assembly, temperature cycling or other environmental conditions. pwm controller input filter vin output filter vout g v cc fb gnd snubber typical application of turbocap tm smps capacitors for input and output filters in dc/dc converters performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
51 rohs compliant turbocap tm high-cv smps capacitors typical esr performance () 27f 47f 100f esr @ 10khz 0.007 0.004 0.003 esr @ 50khz 0.003 0.002 0.0015 esr @ 100khz 0.002 0.0015 0.001 electrical specifications how to order avx styles: rt12 and rt20 rt12 avx style rt12 rt20 5 voltage 25v = 3 50v = 5 100v = 1 c temperature coefficient x7r = c 186 capacitance code (2 significant digits + no. of zeros) 1 f = 105 10 f = 106 100 f = 107 m capacitance tolerance m = 20% a test level a = standard n termination n = straight lead j = leads formed in l = leads formed out 03 number of leads per side 03 = 3 05 = 5 10 = 10 rt12 rt20 voltage cap (f) 50v 100v 25v 50v 100v .82 1.3 2.7 8.2 ...03 12 ...05 14 ...03 18 ...03 22 ...10 ...05 27 ...05 ...03 47 ...05 ...10 50 ...10 68 ...03 100 ...05 ...10 220 ...10 capacitance (f) temperature coefficient temperature coefficient 15%, -55 to +125c capacitance test (mil-std-202 method 305) 25c, 1.00.2 vrms (open circuit voltage) at 1khz dissipation factor 25c 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) 500 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) 50 m-f, whichever is less. dielectric withstanding voltage 25c (flash test) 250% rated voltage for 5 seconds with 50 ma max charging current. life test (1000 hrs) x7r: 150% rated voltage at +125c. moisture resistance (mil-std-202 method 106) ten cycles with no voltage applied. thermal shock (mil-std-202 method 107, condition a) immersion cycling (mil-std-202 method 104, condition b) resistance to solder heat (mil-std-202, method 210, condition b, for 20 seconds)
52 rohs compliant turbocap tm high-cv smps capacitors d a b 0.508 (0.020) typ. 3, 5 or 10 leads per side 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) c 0.254 (0.010) typ. e 6.35 (0.25) min. n style leads j style leads d a b 0.508 (0.020) typ. 3, 5 or 10 leads per side 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) c 1.397 (0.055) 0.127 (0.005) e 1.778 (0.070) 0.254 (0.010) 0.254 (0.010) rad. typ. b d a b 0.508 (0.020) typ. 3, 5 or 10 leads per side 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) c 1.397 (0.055) 0.127 (0.005) e 1.778 (0.070) 0.254 (0.010) 0.254 (0.010) rad. typ. b l style leads style a (max.) b (max.)* c d (max.) e (max.) lead no. of leads 0.635 ( 0.025) style per side rt125c***m*n03 3.56 (0.140) 5.21 (0.205) 5.08 (0.200) 10.8 (0.425) 6.35 (0.250) n 03 rt125c***m*n05 3.56 (0.140) 5.21 (0.205) 5.08 (0.200) 15.9 (0.625) 6.35 (0.250) n 05 rt125c***m*n10 3.56 (0.140) 5.21 (0.205) 5.08 (0.200) 27.9 (1.100) 6.35 (0.250) n 10 rt205c***m*n03 5.59 (0.220) 7.24 (0.285) 6.35 (0.250) 9.50 (0.375) 7.62 (0.300) n 03 rt205c***m*n05 5.59 (0.220) 7.24 (0.285) 6.35 (0.250) 14.6 (0.575) 7.62 (0.300) n 05 rt205c***m*n10 5.59 (0.220) 7.24 (0.285) 6.35 (0.250) 27.3 (1.075) 7.62 (0.300) n 10 dimensions millimeters (inches) *the b dimension is defined for the n style leads. the l and j style leads are 0.381 (0.015) longer. the rt12 will be 5 .89 (0.220), the rt20 will be 7.62 (0.300).
53 electrical specifications how to order st10 avx style 5 voltage 50v = 5 100v = 1 c temperature coefficient x7r = c 186 capacitance code (2 significant digits + no. of zeros) 1 f = 105 10 f = 106 m capacitance tolerance m = 20% a test level a = standard k termination n = straight lead k = leads formed in m = leads formed out 02 number of leads per side 02 = 2 capacitance range temperature coefficient 15%, -55 to +125c capacitance test (mil-std-202, method 305) 25c, 1.00.2 vrms (open circuit voltage) at 1khz dissipation factor 5% max @ 25c, for 50vdc and 100vdc voltage ratings insulation resistance 25c (mil-std-202, method 302) 500 m-f insulation resistance 125c (mil-std-202, method 302) 50 m-f dielectric withstanding voltage 25c (flash test) 250% rated voltage for 5 seconds with 50 ma max charging current. life test capabilities (1000 hrs) 150% rated voltage at +125c. mini-turbocap tm small footprint, high volumetric efficiency, high-cv smps capacitors voltage style 50v 100v st10 18 f 8.2 f the mini-turbocap is constructed from state-of-the-art bme (base metal electrode) mlc capacitors achieving very high cv, as well as, ultra low esr and esl. the resulting, very large capacitance values allow for component and board space reduction. stress relieving lead frames provide effective mechanical decoupling of the ceramic chips from the board, minimizing the stress created by board flexing, vibration and temperature cycling. high temperature solder is used to attach chips to the lead frame thus eliminating the risk of solder reflow during assembly to the board. not rohs compliant
54 how to order mh mh series mh ceramic capacitor lead free ceramic capacitor in molded sm leadframe avx are pleased to introduce the mh range of multi layer ceramic capacitors. the mh components are surface mount molded parts with a multi layer ceramic insert. mh capacitors combine the ceramic attributes of very low esr, non polar construction, excellent high frequency behavior, excellent voltage stress capabilities and wide temperature range; with the enhanced mechanical protection of a molded case. the mh range provides a lead free solution to customers who have previously been unable to use large case ceramic capacitors because of mechanical stressing concerns. for those applications where a tin termination is not acceptable, a tin/lead termination is available. mh x7r range packaging quantity v case size see table below 1 mlcc count 1 voltage 3 = 25v 5 = 50v 1 = 100v c dielectric c = x7r 475 capacitance code (in pf) 2 sig. digits + number of zeros m capacitance tolerance k = 10% m = 20% a failure rate a = not applicable t terminations t = tin plated b = tin/lead plated 2 packaging 2 = 7" reel 4 = 13" reel 6 = waffle pack a special code a = std. product cap f 25v 50v 100v 225 2.2 335 3.3 475 4.7 685 6.8 106 10 156 15 226 22 ts 16949, iso 14001 certi?ed manufacture lead-free compatible component v case dimensions: millimeters (inches) l 7.30.2 0 (0.287 0.008) w 6.1 + 0.20 - 0.10 (0.24 + 0.008 C 0.004) h 3.450.30 (0.1360.012) w 1 3.10.20 (0.1200.008) a 1.4 + 0.30 - 0.20 (0.055 + 0.012 C 0.008) s min 4.40 (0.173) 7" reels 400 13" reels 1500 waffle pack 108 performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
55 style l max w max h max s 0.1 h no. of leads (0.004) per side rh21 7.62 (0.300) 5.40 (0.213) 4.60 (0.181) 2.50 (0.098) 1.50 0.30 (0.059 0.012) 2 rh22 7.62 (0.300) 5.40 (0.213) 7.50 (0.295) 2.50 (0.098) 1.50 0.30 (0.059 0.012) 2 rh31 7.62 (0.300) 7.00 (0.270) 5.08 (0.200) 5.08 (0.200) 1.78 0.25 (0.070 0.010) 3 rh32 7.62 (0.300) 7.00 (0.270) 8.13 (0.320) 5.08 (0.200) 1.78 0.25 (0.070 0.010) 3 rh41 9.20 (0.362) 8.70 (0.342) 4.90 (0.192) 5.08 (0.200) 1.60 0.10 (0.062 0.004) 3 rh42 9.20 (0.362) 8.70 (0.342) 8.20 (0.323) 5.08 (0.200) 1.60 0.10 (0.062 0.004) 3 rh51 10.7 (0.421) 10.7 (0.421) 4.90 (0.192) 7.62 (0.300) 1.60 0.10 (0.062 0.004) 4 rh52 10.7 (0.421) 10.7 (0.421) 8.20 (0.323) 7.62 (0.300) 1.60 0.10 (0.062 0.004) 4 rh61 14.9 (0.586) 13.6 (0.535) 4.90 (0.192) 10.2 (0.400) 1.60 0.10 (0.062 0.004) 5 rh62 14.9 (0.586) 13.6 (0.535) 8.20 (0.323) 10.2 (0.400) 1.60 0.10 (0.062 0.004) 5 smps capacitors (rh style) rh - surface mount j lead range 0.047 f to 47.0 f low esr/esl 25v to 500 vdc x7r dielectric -55oc to +125oc this range of uncoated mlc capacitors are processed for input and output filter capacitors in high frequency dc-dc convertor applications above 10 watts e.g. telecomms and instrumentation, where high volume and low cost is required. these products are available in surface mount j leaded versions and can be supplied in bulk and tape/reel packaging. temperature coefficient cecc 30 000, (4.24.1) x7r: c temperature characteristic - 15%, -55oc to +125oc capacitance test measured at 1 vrms max at 1khz dissipation factor 25c 2.5% max at 1khz, 1 vrms max insulation resistance 25c 100k megohms or 1000 megohms-f, whichever is less dielectric withstanding voltage 25c (flash test) 250% rated voltage for 5 seconds with 50 ma max charging current. (500 volt units @ 150% rated voltage) life test (1000 hrs) cecc 30 000 (4.23) 200% rated voltage at +125oc. (500 volt units @ 120% rated voltage) thermal shock iec 68.2.14 -55oc to +125oc, 5 cycles resistance to solder heat iec 68.2.20 electrical specifications typical esr (m) 3 f, 100v x7r esr @ 100khz 17 esr @ 500khz 12 esr @ 1mhz 14 m1 m1 = m2 0.5 (0.020) m2 1.65 (0.065) 0.15 (0.006) 0.6 (0.024) 0.1 (0.004) w max. l max. h 0.25 (0.010)typ. h max. 1.4 (0.055) typ. s bend radius 90 5 2.54 (0.100) 0.05 (0.002) non-accum. dimensions millimeters (inches) dimensions millimeters (inches) performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
56 rh41 rh42 rh41 rh42 rh41 rh42 rh21 rh21 rh22 rh22 rh21 rh22 rh31 rh32 rh31 rh32 rh31 rh32 rh31 rh32 rh41 rh42 rh51 rh52 rh51 rh52 rh51 rh52 rh51 rh52 rh61 rh62 rh61 rh62 rh61 rh62 rh61 rh62 rh21/rh22 rh31/rh32 rh41/rh42 rh51/rh52 rh61/rh62 style style style style style voltage dc cap f 25 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.78 0.82 1 1.2 1.5 1.8 2.2 2.7 3 3.3 3.9 4.4 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 how to order rh 31 5 c 225 m a 3 0 a 3 style size voltage dielectric capacitance capacitance specification package lead dia. lead s pace lead style code code code code code tolerance code code code code code ( see table above) 3 = 25v c = x7r (2 significant k = 10% a = non 3 = waffle pack 0 = standar d a = standard 3 = j lead 5 = 50v digits + no. m = 20% customized a = tape & reel r = r ohs compliant 1 = 100v of zeros) 2 = 200v eg. 105 = 1 f 7 = 500v 104 = 0.1 f x7r stable dielectric packaging for availability of further parts in the rh21/rh22 series, contact manufacturing. smps capacitors (rh style) rh - surface mount j lead range style qty/reel 13" max. qty/waffle pack rh21 800 270 rh22 500 270 rh31 800 108 rh32 500 108 rh41 800 108 rh42 see note 100 rh51 750 88 rh52 see note 88 rh61 500 42 rh62 see note 42 note: t&r is not yet available. contact manufacturing for further information as this will be available in the future. please select correct termination style.
57 smps capacitors custom lead configurations for the requirements that cannot be satisfied by standard smps style products (sm0-style or sm9-style), avx offers leading edge solutions in custom lead configuration and custom packaging. custom lead configurations offering optimum packaging, high current handling capabilities and stress relief mounting options are all possible with avx. the custom solutions provided by avx maintain high reliability of stacked capacitor product originally developed by avx and historically recognized as the highest reliability product in the market. custom packaging options provide solutions that eliminate reliability concerns in the next level assembly. these custom options provide the following benefits: ? eliminate soldering requirements altogether by providing means of electrical/mechanical connection to the circuit ? provide options for remote soldering away from large ceramic capacitor body and eliminating the risk of thermal shock (refer to photograph with soft, insulated leads soldered to the stacked capacitor using high melting point sn10 solder) many other innovations are available from avx olean advanced products. let them apply these ideas to your application specific requirements. please consult with avxs application engineering staff for a custom solution that will meet demands of your program requirements. custom lead configurations custom packaging performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
58 reliability avx has been involved in numerous military and customer high reliability programs for over 40 years. reliability [% failure rate (fr%) or mean time between failure (mtbf)] is based on the number of failures and the cumulative test hours expanded by test versus use acceleration factors. the acceleration factors are calculated according to the following relationships: temperature acceleration = 10 where: t t = test temp. (c) t u = use temp. (c) voltage v t 3where: acceleration = v u v t = test voltage v u = use voltage military reliability levels are usually expressed in terms of rated conditions versus test conditions (generally 125c and 2x wvdc). if actual conditions are less than rated, the reliability lev- els will improve significantly over rated and can be calculated by use of the above relationship for determining accelerated test hours. for example, if the actual use conditions were 75c and 1/2 wvdc rating for a 125c rated part, the acceleration factors are 64x for voltage and 100x for temperature. reliabilities based on current testing can be obtained by contacting avx. general processing guidelines soldering the sm styles capacitors are generally quite large relative to other types of mlc capacitors. as a result of the size, precau- tions must be taken before subjecting the parts to any soldering operation in order to prevent thermal shock. preheat prior to sol- dering is essential. the heating rate of the supracap ? ceramic bodies during preheat must not exceed 4c/second. the preheat temperature must be within 50c of the peak temperature reached by the ceramic bodies, adjacent to lead material, through the soldering process. the leads are attached to the chip stack with 10 / 88 / 2 (sn / pb / ag, solidus 268c, liquidus 290c). vibration specifications* due to the weight of the supracap ? and the size and strength of the lead frame used, when the supracap ? is to be used in an application where it will undergo high frequency vibration, we strongly recommend using our potted sm9 styles supracap ? . if other dip styles supracap ? are to be used in a high frequency vibration environment, the supracap ? should be supported in some way to prevent oscillation of the capacitor assembly which will result in lead breakage. if strapping the supracap ? to the board is the chosen method of support, care should be taken not to chip the ceramic or apply undue pressure so that crack- ing of the ceramic results. if bonding the supracap ? to the board with adhesive, consider- ation of the cte (coefficient of thermal expansion) is necessary. a mismatch between the cte of the ceramic and adhesive can cause the ceramic to crack during temperature cycles. processing guidelines* there are practical size limitations for mlcs which prohibit reli- able direct mounting of chip capacitors larger than 2225 (.22" x .25") to a substrate. these large chips are subject to thermal shock cracking and thermal cycling solder joint fatigue. even 1812 (.18" x .12") and 2225 chip capacitors will have solder joint failures due to mechanical fatigue after 1500 thermal cycles from 0 to 85c on fr4 and 3000 cycles on alumina from -55 to 125c. this is due to differences in the coefficient of thermal expansion (cte) between mlcs and substrate materials used in hybrids and surface mount assemblies. materials used in the manufacture of all electronic components and substrates have wide ranges of ctes as shown in table 1. table i ctes of typical components and substrates linear displacement this cte difference translates into mechanical stress that is due to the linear displacement of substrate and component. linear displacement is a function of cte (cte sub C cte comp ) and the overall length of the component. long components/ substrates have large linear displacements even with a small cte which will cause high stress in the solder joints and fatigue after a few tem- perature cycles. figure 1 shows linear displacement for conditions where cte is positive and negative. * reference avx technical information paper, processing guidelines for smps capacitors. material cte (ppm/c) alloy 42 5.3 alumina 7 barium titanate capacitor body 10-12 copper 17.6 copper clad invar 6-7 filled epoxy resin ( 59 smps capacitors assembly guidelines figure 1. linear displacement between component and substrate general processing guidelines figure 2 shows the location of maximum stress in the solder joint due to positive and negative dcte and linear displace- ment. stress relief leadframes on larger capacitor sizes (greater than 2225) must be used to minimize mechanical stress on the solder joints dur- ing temperature cycling which is normal operation for power supplies (figure 3). failing solder joints increase both esr and esl causing an increase in ripple, noise and heat, accelerating failure. layout effective solder dams must be used to keep all molten solder on the solder lands during reflow or solder will migrate away from the land, causing opens or weak solder joints. high fre- quency output filters cannot use low power layout techniques such as necked down conductors because of the stringent inductance requirements. figure 3. ?j? and ?l? leadframes mounted on capacitors to relieve stress inductance adding leadframes has a small impact on component induc- tance but this is the price that must be paid for reliable operation over temperature. figure 4 shows typical leadframe inductance that is added for two lead stan doff distances (0.020" and 0.050") versus the number of leads al ong one side of supracap ? which are specifically designed output filter capacitors for 1 mhz and above switchers. the actual inductance will be somewhat less because the leadframes flare out from the lead where the lead- frame is attached to the capacitor body. figure 4. number of leads on one side of capacitor vs. total leadframe inductance vs. substrate standoff height very high frequency switch mode power supplies place tremendous restrictions on output filter capacitors. in addition to handling high ripple current (low esr), esl must approach zero nano henrys, part must be truly surface mountable and be available in new configurations to be integrated into transmission lines to further reduce inductance with load currents greater than 40a at 1 mhz and as frequencies move above 1-2 mhz. the total inductance is the sum of each side of the part where the inductance of one side is the parallel combination of each lead in the leadframe. that inductance is given by: l (nh) = 5x [in (2x ) / (b+c) + 1/2] where = lead length in inches in = natural log b+c = lead cross section in inches so l 1 (nh) = 2xl (nh) where l 1 is the total inductance of the leadframe. capacitor substrate solder fillets body capacitor body solder land "j" leads "l" leads 0.050" standoff 0.020" standoff total leadframe inductance (nh) 0.4 0.3 0.2 0.1 5 10 15 20 number of leads on one side of capacitor 0 capacitor capacitor capacitor capacitor substrate substrate substrate oper amb sub t t cte cte cap > > oper amb sub t t cte cte cap < > dimensions at ambient temperature substrate linear displacement puts solder joint and capacitor in tension substrate linear displacement puts solder joint and capacitor in compression figure 2 oper amb sub t t cte cte cap < > stress for capacitor substrate solder fillet maximum stress oper amb sub t t cte cte cap > > stress for capacitor substrate solder fillet maximum stress
60 smps capacitors (sk style) commercial radial range sk 01 3 e 125 z a a * style size see chart below voltage 25v = 3 50v = 5 100v = 1 200v = 2 500v = 7 temperature coefficient z5u = e x7r = c c0g = a capacitance code (2 significant digits + no. of zeros) 22 nf = 223 220 nf = 224 1 f = 105 100 f = 107 capacitance tolerance c0g: j = 5% k = 10% m = 20% x7r: k = 10% m = 20% z = +80, -20% z5u: m = 20% z = +80, -20% p = gmv (+100, -0%) te s t level a = standard b = hi-rel * leads a = tin/lead r = rohs compliant packaging (see note 1) note 1: no suffix signifies bulk packaging, which is avx standard packaging. sk01, sk * 3, sk * 4, sk * 5, sk * 6, sk * 9 & sk * 0 are available taped and reel per eia-468. use suffix tr1 if tape & reel is required. product offering C c0g, x7r and z5u avx sk styles are conformally coated mlc capacitors for input or output filtering in switch mode power supplies. they are specially processed to handle high currents and are low enough in cost for commercial smps application. temperature coefficient c0g: a temperature coefficient - 0 30 ppm/c, -55 to +125c x7r: c temperature coefficient - 15%, -55 to +125c z5u: e temperature coefficient - +22, -56%, +10 to +85c capacitance test (mil-std-202 method 305) c0g: 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r: 25c, 1.00.2 vrms (open circuit voltage) at 1khz z5u: 25c, 0.5 vrms max (open circuit voltage) at 1khz dissipation factor 25c c0g: 0.15% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz x7r: 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz z5u: 3.0% max @ 25c, 0.5 vrms max (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) c0g and x7r: 100k m or 1000 m-f, whichever is less. z5u: 10k m or 1000 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) c0g and x7r: 10k m or 100 m-f, whichever is less. z5u: 1k m or 100 m-f, whichever is less. dielectric withstanding voltage 25c (flash test) c0g and x7r: 250% rated voltage for 5 seconds with 50 ma max charging current. (500 volt units @ 750 vdc) z5u: 200% rated voltage for 5 seconds with 50 ma max charging current. life test (1000 hrs) c0g and x7r: 200% rated voltage at +125c. (500 volt units @ 600 vdc) z5u: 150% rated voltage at +85c moisture resistance (mil-std-202 method 106) c0g, x7r, z5u: ten cycles with no voltage applied. thermal shock (mil-std-202 method 107, condition a) immersion cycling (mil-std-202 method 104, condition b) resistance to solder heat (mil-std-202, method 210, condition b, for 20 seconds) electrical specifications note: capacitors with x7r and z5u dielectrics are not intended for applications across ac supply mains or ac line filtering with polarity reversal. contact plant for recommendations. * hi-rel screening for c0g and x7r only. screening consists of 100% group a (b level), subgroup 1 per mil-prf-49470. tape & reel quantity part pieces sk01 2000 sk03/sk53 1000 sk04/sk54 1000 sk05/sk55 500 sk06/sk56 500 sk07 n/a sk08 n/a sk09/sk59 500 sk10/sk60 400 rohs part available sk01 yes sk03/sk53 yes sk04/sk54 yes sk05/sk55 yes sk06/sk56 yes sk07 yes sk08 yes sk09/sk59 yes sk10/sk60 yes how to order performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant for rohs compliant products, please select correct termination style.
61 smps capacitors (sk style) product offering C c0g, x7r and z5u style l (max.) h (max.) t (max.) ls (nom.) ld (nom.) sk01 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 0.508 (0.020) sk03/sk53 7.62 (0.300) 7.62 (0.300) 5.08 (0.200) 5.08 (0.200) 0.508 (0.020) sk04/sk54 10.2 (0.400) 10.2 (0.400) 5.08 (0.200) 5.08 (0.200) 0.508 (0.020) sk05/sk55 12.7 (0.500) 12.7 (0.500) 5.08 (0.200) 10.2 (0.400) 0.635 (0.025) sk06/sk56 22.1 (0.870) 15.2 (0.600) 5.08 (0.200) 20.1 (0.790) 0.813 (0.032) sk07 27.9 (1.100) 15.2 (0.600) 5.08 (0.200) 24.9 (0.980) 0.813 (0.032) sk08 27.9 (1.100) 15.2 (0.600) 8.89 (0.350) 24.9 (0.980) 0.813 (0.032) sk09/sk59 17.0 (0.670) 13.7 (0.540) 5.08 (0.200) 14.6 (0.575) 0.635 (0.025) sk10/sk60 23.6 (0.930) 18.3 (0.720) 6.35 (0.250) 20.3 (0.800) 0.813 (0.032) l = length t = thickness ls = lead spacing nominal .787 (0.031) h = height m = meniscus 1.52 (0.060) max. ll = lead length 50.8 (2.000) max./25.4 (1.000) min. ld = lead diameter nominal .050 (0.002) sk01 sk03 C sk10 sk53 - sk56 and sk59 C sk60 m ld ll ls h l m ld ll ls h l m ld ll ls h h + 3.683 (0.145) l t dimensions millimeters (inches) z5u capacitance range (f) style 25 wvdc 50 wvdc 100 wvdc 200 wvdc min./max. min./max. min./max. min./max. sk01 .10/1.2 .10/0.82 .10/0.47 .10/0.33 sk03/sk53 .10/5.6 .10/3.30 .10/2.20 .10/1.50 sk04/sk54 1.0/10.0 1.0/8.20 .10/4.70 .10/3.30 sk05/sk55 1.0/18.0 1.0/10.00 1.0/6.80 .10/4.70 sk06/sk56 1.0/47.0 1.0/39.00 1.0/22.00 1.0/15.00 sk07 1.0/68.0 1.0/47.00 1.0/27.00 1.0/18.00 sk08 82/120.0 56/100.00 33/47.00 22/33.00 sk09/sk59 1.0/27.0 1.0/18.00 1.0/10.00 1.0/6.80 sk10/sk60 1.0/56.0 1.0/39.00 1.0/22.00 1.0/18.00 c0g capacitance range (f) x7r capacitance range (f) style 25 50 100 200 500 wvdc wvdc wvdc wvdc wvdc min./max. min./max. min./max. min./max. min./max. sk01 .001/0.015 .001/0.012 .001/0.010 .0010/0.0056 .0010/0.0018 sk03/sk53 .01/0.056 .01/0.047 .01/0.039 .001/0.022 .001/0.0068 sk04/sk54 .01/0.12 .01/0.10 .01/0.082 .01/0.047 .001/0.015 sk05/sk55 .01/0.18 .01/0.15 .01/0.12 .01/0.068 .001/0.022 sk06/sk56 .10/0.56 .01/0.47 .01/0.39 .01/0.22 .01/0.068 sk07 .10/0.68 .01/0.56 .01/0.47 .01/0.27 .01/0.082 sk08 .82/1.20 .68/1.10 .56/0.82 .33/0.47 .10/0.15 sk09/sk59 .10/0.27 .01/0.22 .01/0.18 .01/0.10 .001/0.039 sk10/sk60 .10/0.68 .01/0.56 .01/0.47 .01/0.27 .01/0.082 style 25 50 100 200 500 wvdc wvdc wvdc wvdc wvdc min./max. min./max. min./max. min./max. min./max. sk01 .01/0.39 .01/0.33 .01/0.27 .01/0.12 .001/0.047 sk03/sk53 .10/2.2 .10/1.8 .01/1.5 .01/0.68 .01/0.27 sk04/sk54 .10/4.7 .10/3.3 .10/2.7 .01/1.0 .01/0.47 sk05/sk55 .10/6.8 .10/6.8 .10/3.9 .10/1.8 .01/0.68 sk06/sk56 1.0/15 1.0/10 .10/5.6 .10/3.9 .10/1.5 sk07 1.0/18 1.0/14 1.0/8.2 .10/4.7 .10/2.2 sk08 22/33 15/22 10/15 5.6/8.2 2.2/3.9 sk09/sk59 .10/8.2 .10/5.6 .10/3.3 .10/2.2 .10/1.2 sk10/sk60 1.0/18 1.0/12 .10/6.8 .10/4.7 .10/2.2
62 smps capacitors (se style) extended commercial radial range se 01 3 c 125 m a a * style size see chart below voltage 25v = 3 50v = 5 100v = 1 temperature coefficient x7r = c capacitance code (2 significant digits + no. of zeros) 22 nf = 223 220 nf = 224 1 f = 105 100 f = 107 capacitance tolerance x7r: k = 10% m = 20% z = +80, -20% te s t level a = standard b = hi-rel * leads a = tin/lead r = rohs compliant packaging (see note 1) note 1: no suffix signifies bulk packaging, which is avx standard packaging. parts available tape and reel per eia- 468. use suffix tr1 if tape & reel is required. note: capacitors with x7r dielectrics are not intended for applications across ac supply mains or ac line filtering with polarity reversal. contact plant for recommendations. * hi-rel screening consists of 100% group a, subgroup 1 per mil-prf-39014. product offering C x7r avx se styles offer capacitance extension to popular sk ranges. the cv product for se-series, x7r capacitors (tcc: 15% over -55 to +125c) compares favorably to high cv ranges offered by other suppliers in much less stable y5u dielectric (tcc: +22/-56% over -30 to +85c). se style capacitors are conformally coated and are designed for input and output filtering applications in switch mode power supplies. temperature coefficient x7r: temperature coefficient 15%, -55 to +125c capacitance test (mil-std-202 method 305) x7r: 25c, 1.00.2 vrms (open circuit voltage) at 1khz dissipation factor 25c x7r: 2.5% max @ 25c, 1.00.2 vrms (open circuit voltage) at 1khz insulation resistance 25c (mil-std-202 method 302) x7r: 100k m or 1000 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) x7r: 10k m or 100 m-f, whichever is less. dielectric withstanding voltage 25c (flash test) x7r: 250% rated voltage for 5 seconds with 50 ma max charging current. life test (1000 hrs) x7r: 200% rated voltage at +125c moisture resistance (mil-std-202 method 106) x7r: ten cycles with no voltage applied. thermal shock (mil-std-202 method 107, condition a) immersion cycling (mil-std-202 method 104, condition b) resistance to solder heat (mil-std-202, method 210, condition b, for 20 seconds) electrical specifications tape & reel quantity part pieces se01 2000 se03/se53 1000 se04/se54 1000 se05/se55 500 se06/se56 500 rohs part available se01 yes se03/se53 yes se04/se54 yes se05/se55 yes se06/se56 yes how to order performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant for rohs compliant products, please select correct termination style.
63 smps capacitors (se style) product offering C x7r style l (max.) h (max.) t (max.) ls (nom.) ld (nom.) se01 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 0.508 (0.020) se03/se53 7.62 (0.300) 7.62 (0.300) 5.08 (0.200) 5.08 (0.200) 0.508 (0.020) se04/se54 10.2 (0.400) 10.2 (0.400) 5.08 (0.200) 5.08 (0.200) 0.508 (0.020) se05/se55 12.7 (0.500) 12.7 (0.500) 5.08 (0.200) 10.2 (0.400) 0.635 (0.025) se06/se56 22.1 (0.870) 15.2 (0.600) 5.08 (0.200) 20.1 (0.790) 0.813 (0.032) l = length t = thickness ls = lead spacing nominal .787 (0.031) h = height m = meniscus 1.52 (0.060) max. ll = lead length 50.8 (2.000) max./25.4 (1.000 min.) ld = lead diameter nominal .050 (0.002) se01 se03 C se06 se53 C se56 m ld ll ls h l m ld ll ls h l m ld ll ls h h + 3.683 (0.145) l t dimensions millimeters (inches) x7r capacitance range (f) style 25 50 100 wvdc wvdc wvdc min./max. min./max. min./max. se01 0.47/1.5 0.39/1.0 0.33/0.68 se03/se53 2.7/6.8 2.2/4.7 1.8/3.3 se04/se54 5.6/12 3.9/10 3.3/6.8 se05/se55 8.2/18 6.8/12 4.7/10.0 se06/se56 18/39 12/27 6.8/15
64 smps capacitors (cecc offering) size code length (l) height (h) thickness (t) nom (t) s 0.4 (max.) (max.) (max.) br40 10.16 (0.400) 11.7 (0.460) 3.81 (0.150) 0.51 (0.020) 5.08 (0.200) br50 12.7 (0.500) 12.7 (0.500) 5.1 (0.200) 0.64 (0.025) 10.16 (0.400) br84 23.6 (0.930) 17.78 (0.700) 6.35 (0.250) 0.76 (0.030) 20.32 (0.800) l t h t s 31.7 (1.248) min. 1.50 (0.059) max. dimensions millimeters (inches) 1b/c0g 2c1/x7r cecc 30 601 801 issue 1 cecc 30 701 801 issue 1 50v 100v 200v 500v 50v 100v 200v 500v br40 683-104 473-683 333-473 4r5-153 185-275 125-185 334-474 473-154 br50 124-224 104-154 683-104 820-333 395-475 225-275 684-105 104-394 br84 104-564 104-474 104-334 223-104 475-186 475-156 105-335 474-155 cecc approved range br 84 1 c 156 k t a style size voltage dielectric capacitance capacitance specification lead length code code code code code tolerance code code see 5 = 50v a = c0g (2 significant g = 2% t = cecc a = 31.7mm min. table 1 = 100v c = x7r digits + no. c0g only above 2 = 200v of zeros) j = 5% 7 = 500v c0g only k = 10% m = 20% p = -0 +100% note: if tape and reel is required, add tr to the end of the part number how to order not rohs compliant
65 escc qualified smps capacitors high voltage chip/leaded capacitors capacitors, fixed, chip, ceramic dielectric, type ii, high voltage, based on styles 1812 and 1825 for use in escc space programs, according to escc generic specification 3009 and associated detail specification 3009/034 as recommended by the space components coordination group. (ranges in table below) note: variants 01 to 12: metallized pads capacitors, fixed, ceramic dielectric, type ii, high voltage, 1.0 to 5.0 kv, based on case styles vr, cv and ch for use in escc space programs, according to escc generic specification 3001 and asso ciated detail specification 3001/034 as recommended by the space components coordination group. (ranges in table) note 1: lead types a - leaded radial (epoxy coated) b - leaded radial (polyurethane varnish) c - straight dual in line d - l dual in line note 2: tolerances of 10% and 20% are available rated size variant voltage tolerance capacitance (kv) (%) code (e12) 1812 01 1.0 10 392 - 223 02 20 03 2.0 10 152 - 182 04 20 05 3.0 10 821 - 102 06 20 1825 07 1.0 10 273 - 563 08 20 09 2.0 10 222 - 682 10 20 11 3.0 10 821 - 392 12 20 3009034 detail spec number xx type variant (per table) b test level c = standard test level b = level c plus serialized and capacitance recorded before and after 100% burn-in. xxx capacitance code the first two digits represent significant figures and the third digit specifies the number of zeros to follow; i.e. 102 = 1000pf 103 = 10000pf how to order parts should be ordered using the escc variant number as follows: high voltage chip capacitors case lead capacitance code (e12) size variant type 1.0kv 2.0kv 3.0kv 4.0kv 5.0kv vr30s 01 a 392 - 203 152 - 182 821 - 102 vr30 02 a 273 - 563 222 - 682 821 - 392 vr40 03 a 473 - 124 822 - 153 472 - 103 182 - 222 vr50 04 a 154 - 274 183 - 333 123 - 183 562 - 822 332 - 392 vr66 05 a 224 - 564 393 - 823 223 - 393 103 - 153 682 - 103 vr84 06 a 684 - 105 473 - 154 473 - 683 183 - 393 123 - 183 vr90 07 a 125 - 275 184 - 334 823 - 184 473 - 124 223 - 563 cv41 08 b 473 - 124 822 - 153 472 - 103 182 - 222 ch41 09 c 473 - 124 822 - 153 472 - 103 182 - 222 ch41 10 d 473 - 124 822 - 153 472 - 103 182 - 222 cv51 11 b 154 - 274 183 - 333 123 - 183 562 - 822 332 - 392 ch51 12 c 154 - 274 183 - 333 123 - 183 562 - 822 332 - 392 ch51 13 d 154 - 274 183 - 333 123 - 183 562 - 822 332 - 392 cv61 14 b 224 - 564 393 - 823 223 - 393 103 - 153 682 - 103 ch61 15 c 224 - 564 393 - 823 223 - 393 103 - 153 682 - 103 ch61 16 d 224 - 564 393 - 823 223 - 393 103 - 153 682 - 103 cv76 17 b 684 - 105 473 - 154 473 - 683 183 - 393 123 - 183 ch76 18 c 684 - 105 473 - 154 473 - 683 183 - 393 123 - 183 ch76 19 d 684 - 105 473 - 154 473 - 683 183 - 393 123 - 183 cv91 20 b 125 - 275 184 - 334 823 - 184 473 - 124 223 - 563 ch91 21 c 125 - 275 184 - 334 823 - 184 473 - 124 223 - 563 ch91 22 d 125 - 275 184 - 334 823 - 184 473 - 124 223 - 563 high voltage leaded capacitors 3001034 detail spec number xx type variant (per table above) b test level c = standard test level b = level c plus serialized and capacitance recorded before and after 100% burn-in. xxx capacitance code the first two digits represent significant figures and the third digit specifies the number of zeros to follow; i.e. 102 = 1000pf 103 = 10000pf k capacitance tolerance k = 10% m = 20% x voltage m = 1kv p = 2kv r = 3kv s = 4kv z = 5kv eg 300103412c274km eg 300903401c223 how to order parts should be ordered using the escc variant number as follows: not rohs compliant
66 escc qualified smps capacitors high capacitance capacitors, fixed, ceramic dielectric, type ii, high capacitance, based on case styles br, cv and ch for use in escc space programs, according to escc generic specification 3001 and associated detail specification 3001/030 as recommended by the space components coordination group. (see ranges in table below) note 1: lead types a - leaded radial (epoxy coated) b - leaded radial (polyurethane varnish) c - straight dual in line d - l dual in line note 2: tolerances of 10% and 20% are available case figure capacitance code (e12) size variant 50v 100v 200v 500v br40 01 a 185 - 335 125 - 275 334 - 564 124 - 224 br50 02 a 395 - 565 225 - 395 684 - 105 274 - 394 br66 03 a 685 - 106 475 - 825 105 - 225 474 - 105 br72 04 a 126 - 186 825 - 156 225 - 335 824 - 155 br84 05 a 126 - 186 825 - 156 225 - 335 824 - 155 cv41 06 b 185 - 335 125 - 275 334 - 564 124 - 224 ch41 07 c 185 - 335 125 - 275 334 - 564 124 - 224 ch41 08 d 185 - 335 125 - 275 334 - 564 124 - 224 ch42 09 c 395 - 685 335 - 565 684 - 125 274 - 474 ch42 10 d 395 - 685 335 - 565 684 - 125 274 - 474 ch43 11 c 825 - 106 685 - 825 155 - 185 564 - 684 ch43 12 d 825 - 106 685 - 825 155 - 185 564 - 684 ch44 13 c 126 106 225 824 - 105 ch44 14 d 126 106 225 824 - 105 cv51 15 b 395 - 565 225 - 395 684 - 105 274 - 394 ch51 16 c 395 - 565 225 - 395 684 - 105 274 - 394 ch51 17 d 395 - 565 225 - 395 684 - 105 274 - 394 ch52 18 c 685 - 106 475 - 825 125 - 225 474 - 824 ch52 19 d 685 - 106 475 - 825 125 - 225 474 - 824 ch53 20 c 126 - 156 106 - 126 275 - 335 105 - 125 ch53 21 d 126 - 156 106 - 126 275 - 335 105 - 125 ch54 22 c 186 - 226 156 395 155 ch54 23 d 186 - 226 156 395 155 cv61 24 b 685 - 106 475 - 825 105 - 225 474 - 105 ch61 25 c 685 - 106 475 - 825 105 - 225 474 - 105 ch61 26 d 685 - 106 475 - 825 105 - 225 474 - 105 ch62 27 c 126 - 226 106 - 156 275 - 475 105 - 185 ch62 28 d 126 - 226 106 - 156 275 - 475 105 - 185 ch63 29 c 276 - 336 186 - 226 565 - 685 225 - 275 ch63 30 d 276 - 336 186 - 226 565 - 685 225 - 275 ch64 ?31 c 396 276 - 336 825 - 106 335 ch64 32 d 396 276 - 336 825 - 106 335 cv71 33 b 126 - 186 825 - 156 225 - 335 824 - 155 ch71 34 c 126 - 186 825 - 156 225 - 335 824 - 155 ch71 35 d 126 - 186 825 - 156 225 - 335 824 - 155 ch72 36 c 226 - 396 186 - 276 395 - 685 185 - 335 ch72 37 d 226 - 396 186 - 276 395 - 685 185 - 335 high capacitance leaded capacitors 3001030 detail spec number xx type variant (per table above) b test level c = standard test level b = level c plus serialized and capacitance recorded before and after 100% burn-in. xxx capacitance code the first two digits represent significant figures and the third digit specifies the number of zeros to follow; i.e. 102 = 1000pf 103 = 10000pf k capacitance tolerance k = 10% m = 20% x voltage c = 50v e = 100v g = 200v l = 500v eg 300103018c106kc how to order parts should be ordered using the escc variant number as follows: case figure capacitance code (e12) size variant 50v 100v 200v 500v ch73 38 c 476 - 566 336 - 396 825 - 106 395 - 475 ch73 39 d 476 - 566 336 - 396 825 - 106 395 - 475 ch74 40 c 686 476 126 565 ch74 41 d 686 476 126 565 cv76 42 b 126 - 186 825 - 156 225 - 335 824 - 155 ch76 43 c 126 - 186 825 - 156 225 - 335 824 - 155 ch76 44 d 126 - 186 825 - 156 225 - 335 824 - 155 ch77 45 c 226 - 396 186 - 276 395 - 685 185 - 335 ch77 46 d 226 - 396 186 - 276 395 - 685 185 - 335 ch78 47 c 476 - 566 336 - 396 825 - 106 395 - 475 ch78 48 d 476 - 566 336 - 396 825 - 106 395 - 475 ch79 49 c 686 476 126 565 ch79 50 d 686 476 126 565 ch81 51 c 156 - 226 126 - 186 225 - 395 824 - 155 ch81 52 d 156 - 226 126 - 186 225 - 395 824 - 155 ch82 53 c 276 - 476 226 - 396 475 - 825 ch82 54 d 276 - 476 226 - 396 475 - 825 ch83 55 c 566 - 686 476 - 566 106 - 126 ch83 56 d 566 - 686 476 - 566 106 - 126 ch84 57 c 826 686 156 ch84 58 d 826 686 156 ch86 59 c 226 - 336 156 - 276 395 - 685 155 - 225 ch86 60 d 226 - 336 156 - 276 395 - 685 155 - 225 ch87 61 c 396 - 686 336 - 566 825 - 156 ch87 62 d 396 - 686 336 - 566 825 - 156 ch88 63 c 826 - 107 686 - 826 186 - 226 ch88 64 d 826 - 107 686 - 826 186 - 226 ch89 65 c 127 107 276 ch89 66 d 127 107 276 ch91 67 c 396 - 476 336 - 396 825 - 106 ch91 68 d 396 - 476 336 - 396 825 - 106 ch92 69 c 566 - 107 476 - 826 126 - 226 ch92 70 d 566 - 107 476 - 826 126 - 226 ch93 71 c 127 - 157 107 - 127 276 - 336 ch93 72 d 127 - 157 107 - 127 276 - 336 ch94 73 c 187 157 396 ch94 74 d 187 157 396 lot acceptance testing is available for all our escc qualified ranges. lat 1 42 samples 12 mechanical + 20 life test + 6 for tc + 4 for solder lat 2 30 samples 20 life test + 6 for tc + 4 for solder lat 3 10 samples 6 for tc + 4 for solder not rohs compliant
67 smps capacitors escc detail specification no. 3001/034 physical dimensions C vr style millimeters (inches) escc detail specification no. 3001/034 physical dimensions C cv style millimeters (inches) l i e m= = m symbol variants 01 to 06 variants 07 to 12 min. max. min. max. l 4.20 5.00 4.20 5.00 (0.165) (0.197) (0.165) (0.197) l 2.80 3.60 5.67 6.67 (0.110) (0.142) (0.223) (0.263) e C 3.00 C 3.30 (0.118) (0.130) m 0.25 0.75 0.25 0.75 (0.010) (0.030) (0.010) (0.030) b h l e j d f variant case b ?d e f h j l size max. min. max. min. max. max. max. max. min. 01 vr30s 7.62 0.46 0.56 4.58 5.58 5.00 4.60 1.50 31.7 (0.300) (0.018) (0.022) (0.180) (0.220) (0.197) (0.181) (0.059) (1.248) 02 vr30 7.62 0.46 0.56 4.58 5.58 5.00 9.62 1.50 31.7 (0.300) (0.018) (0.022) (0.180) (0.220) (0.197) (0.379) (0.059) (1.248) 03 vr40 10.16 0.46 0.56 4.58 5.58 5.00 11.7 1.50 31.7 (0.400) (0.018) (0.022) (0.180) (0.220) (0.197) (0.461) (0.059) (1.248) 04 vr50 12.7 0.59 0.69 9.66 10.66 5.10 14.2 1.50 31.7 (0.500) (0.023) (0.027) (0.380) (0.420) (0.201) (0.559) (0.059) (1.248) 05 vr66 17.5 0.86 0.96 14.2 15.2 6.40 16.5 1.50 31.7 (0.689) (0.034) (0.038) (0.559) (0.598) (0.252) (0.650) (0.059) (1.248) 06 vr84 23.62 0.86 0.96 20.4 22.0 6.40 19.78 1.50 31.7 (0.930) (0.034) (0.038) (0.803) (0.866) (0.252) (0.779) (0.059) (1.248) 07 vr90 23.5 0.86 0.96 20.4 22.0 6.40 42.0 1.50 31.7 (0.925) (0.034) (0.038) (0.803) (0.866) (0.252) (1.654) (0.059) (1.248) variant case b ?d e f h l size max. min. max. min. max. max. max. min. max. 08 cv41 10.6 0.65 0.75 7.70 8.70 3.80 8.70 22.0 28.0 (0.417) (0.026) (0.030) (0.303) (0.343) (0.150) (0.343) (0.866) (1.102) 11 cv51 11.9 0.85 0.95 9.66 10.66 3.80 10.7 22.0 28.0 (0.469) (0.033) (0.037) (0.380) (0.420) (0.150) (0.421) (0.866) (1.102) 14 cv61 16.5 0.85 0.95 14.74 15.74 3.80 13.6 22.0 28.0 (0.650) (0.033) (0.037) (0.580) (0.620) (0.150) (0.535) (0.866) (1.102) 17 cv76 22.7 0.85 0.95 20.4 22.0 3.80 16.6 22.0 28.0 (0.894) (0.033) (0.037) (0.803) (0.866) (0.150) (0.654) (0.866) (1.102) 20 cv91 22.7 1.15 1.25 20.4 22.0 3.80 40.6 22.0 28.0 (0.894) (0.045) (0.049) (0.803) (0.866) (0.150) (1.598) (0.866) (1.102) f bd h ll e escc detail specification no. 3009/034 physical dimensions millimeters (inches)
68 escc detail specification no. 3001/034 physical dimensions C ch style, d.i.l. millimeters (inches) smps capacitors a l a1 b e d f b1 e variant case a d e f size max. max. min. max. max. 07 ch41 3.80 (0.150) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343) 9.20 (0.362) 09 ch42 7.40 (0.291) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343) 9.20 (0.362) 11 ch43 11.1 (0.437) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343) 9.20 (0.362) 13 ch44 14.8 (0.583) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343) 9.20 (0.362) 16 ch51 3.80 (0.150) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 18 ch52 7.40 (0.291) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 20 ch53 11.1 (0.437) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 22 ch54 14.8 (0.583) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 25 ch61 3.80 (0.150) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 27 ch62 7.40 (0.291) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 29 ch63 11.1 (0.437) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 31 ch64 14.8 (0.583) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 34 ch71 3.80 (0.150) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 36 ch72 7.40 (0.291) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 38 ch73 11.1 (0.437) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 40 ch74 14.8 (0.583) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 43 ch76 3.80 (0.150) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 45 ch77 7.40 (0.291) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 47 ch78 11.1 (0.437) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 49 ch79 14.8 (0.583) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 51 ch81 3.80 (0.150) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 53 ch82 7.40 (0.291) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 55 ch83 11.1 (0.437) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 57 ch84 14.8 (0.583) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 59 ch86 3.80 (0.150) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 61 ch87 7.40 (0.291) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 63 ch88 11.1 (0.437) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 65 ch89 14.8 (0.583) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 67 ch91 3.80 (0.150) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) 69 ch92 7.40 (0.291) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) 71 ch93 11.1 (0.437) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) 73 ch94 14.8 (0.583) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) symbol min. max. notes a1 - 2.00 1 (0.079) b 0.45 0.55 1 (0.018) (0.022) b1 0.204 0.304 1 (0.008) (0.012) e 2.49 2.59 2 (0.098) (0.102) l 12.0 14.0 1 (0.472) (0.551) notes: 1 C all leads 2 C each space escc detail specification no. 3001/034 physical dimensions C ch style, l millimeters (inches) a l b e d f e l l variant case a d e f size max. max. min. max. max. 10 ch41 3.80 (0.150) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343) 9.20 (0.362) 13 ch51 3.80 (0.150) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 16 ch61 3.80 (0.150) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 19 ch76 3.80 (0.150) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 22 ch91 3.80 (0.150) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) symbol min. max. notes b 0.45 0.55 1 (0.018) (0.022) e 2.49 2.59 2 (0.098) (0.102) l 2.04 3.01 1 (0.080) (0.120) notes: 1 C all leads 2 C each space
69 smps capacitors escc detail specification no. 3001/030 physical dimensions C br style millimeters (inches) escc detail specification no. 3001/030 physical dimensions C cv style millimeters (inches) b h l e j d f variant case b ?d e f h j l size max. min. max. min. max. max. max. max. min. 01 br40 10.16 0.46 0.56 4.58 5.58 5.00 11.7 1.50 31.7 (0.400) (0.018) (0.022) (0.180) (0.220) (0.197) (0.461) (0.059) (1.248) 02 br50 12.7 0.59 0.69 9.66 10.66 5.10 14.2 1.50 31.7 (0.500) (0.023) (0.027) (0.380) (0.420) (0.201) (0.559) (0.059) (1.248) 03 br66 17.5 0.86 0.96 14.2 15.2 6.40 16.5 1.50 31.7 (0.689) (0.034) (0.038) (0.559) (0.598) (0.252) (0.650) (0.059) (1.248) 04 br72 19.3 0.86 0.96 14.74 15.74 6.40 24.0 1.50 31.7 (0.760) (0.034) (0.038) (0.580) (0.620) (0.252) (0.945) (0.059) (1.248) 05 br84 23.62 0.71 0.81 18.93 20.83 6.40 19.78 1.50 31.7 (0.930) (0.028) (0.032) (0.745) (0.820) (0.252) (0.779) (0.059) (1.248) variant case b ?d e f h l size max. min. max. min. max. max. max. min. max. 06 cv41 10.6 0.65 0.75 7.70 8.70 3.80 8.70 22.0 28.0 (0.417) (0.026) (0.030) (0.303) (0.343) (0.150) (0.343) (0.866) (1.102) 15 cv51 11.9 0.85 0.95 9.66 10.66 3.80 10.7 22.0 28.0 (0.469) (0.033) (0.037) (0.380) (0.420) (0.150) (0.421) (0.866) (1.102) 24 cv61 16.5 0.85 0.95 14.74 15.74 3.80 13.6 22.0 28.0 (0.650) (0.033) (0.037) (0.580) (0.620) (0.150) (0.535) (0.866) (1.102) 33 cv71 17.8 0.85 0.95 14.74 15.74 3.80 21.6 22.0 28.0 (0.701) (0.033) (0.037) (0.580) (0.620) (0.150) (0.850) (0.866) (1.102) 42 cv76 22.7 0.85 0.95 20.4 22.0 3.80 16.6 22.0 28.0 (0.894) (0.033) (0.037) (0.803) (0.866) (0.150) (0.654) (0.866) (1.102) f bd h ll e
70 escc detail specification no. 3001/030 physical dimensions C ch style, d.i.l. millimeters (inches) smps capacitors a l a1 b e d f b1 e variant case a d e f size max. max. min. max. max. 07 ch41 3.80 (0.150) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343) 9.20 (0.362) 09 ch42 7.40 (0.291) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343) 9.20 (0.362) 11 ch43 11.1 (0.437) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343) 9.20 (0.362) 13 ch44 14.8 (0.583) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343) 9.20 (0.362) 16 ch51 3.80 (0.150) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 18 ch52 7.40 (0.291) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 20 ch53 11.1 (0.437) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 22 ch54 14.8 (0.583) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 25 ch61 3.80 (0.150) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 27 ch62 7.40 (0.291) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 29 ch63 11.1 (0.437) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 31 ch64 14.8 (0.583) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 34 ch71 3.80 (0.150) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 36 ch72 7.40 (0.291) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 38 ch73 11.1 (0.437) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 40 ch74 14.8 (0.583) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 43 ch76 3.80 (0.150) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 45 ch77 7.40 (0.291) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 47 ch78 11.1 (0.437) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 49 ch79 14.8 (0.583) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 51 ch81 3.80 (0.150) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 53 ch82 7.40 (0.291) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 55 ch83 11.1 (0.437) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 57 ch84 14.8 (0.583) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 59 ch86 3.80 (0.150) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 61 ch87 7.40 (0.291) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 63 ch88 11.1 (0.437) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 65 ch89 14.8 (0.583) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 67 ch91 3.80 (0.150) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) 69 ch92 7.40 (0.291) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) 71 ch93 11.1 (0.437) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) 73 ch94 14.8 (0.583) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) symbol min. max. notes a1 - 2.00 1 (0.079) b 0.45 0.55 1 (0.018) (0.022) b1 0.204 0.304 1 (0.008) (0.012) e 2.49 2.59 2 (0.098) (0.102) l 2.04 3.04 1 (0.080) (0.120) notes: 1 C all leads 2 C each space escc detail specification no. 3001/030 physical dimensions C ch style, l millimeters (inches) a l b e d f e l l variant case a d e f size max. max. min. max. max. 08 ch41 3.80 (0.150) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343 9.20 (0.362) 10 ch42 7.40 (0.291) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343 9.20 (0.362) 12 ch43 11.1 (0.437) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343 9.20 (0.362) 14 ch44 14.8 (0.583) 8.70 (0.343) 7.70 (0.303) 8.70 (0.343 9.20 (0.362) 17 ch51 3.80 (0.150) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 19 ch52 7.40 (0.291) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 21 ch53 11.1 (0.437) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 23 ch54 14.8 (0.583) 10.7 (0.421) 9.66 (0.380) 10.66 (0.420) 10.7 (0.421) 26 ch61 3.80 (0.150) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 28 ch62 7.40 (0.291) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 30 ch63 11.1 (0.437) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 32 ch64 14.8 (0.583) 13.6 (0.535) 13.5 (0.531) 14.5 (0.571) 14.9 (0.587) 35 ch71 3.80 (0.150) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 37 ch72 7.40 (0.291) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 39 ch73 11.1 (0.437) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 41 ch74 14.8 (0.583) 21.6 (0.850) 14.74 (0.580) 15.74 (0.620) 16.8 (0.661) 44 ch76 3.80 (0.150) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 46 ch77 7.40 (0.291) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 48 ch78 11.1 (0.437) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 50 ch79 14.8 (0.583) 16.6 (0.654) 19.52 (0.769) 21.12 (0.831) 21.6 (0.850) 52 ch81 3.80 (0.150) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 54 ch82 7.40 (0.291) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 56 ch83 11.1 (0.437) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 58 ch84 14.8 (0.583) 38.2 (1.504) 9.66 (0.380) 10.66 (0.420) 12.0 (0.472) 60 ch86 3.80 (0.150) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 62 ch87 7.40 (0.291) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 64 ch88 11.1 (0.437) 38.2 (1.504) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 66 ch89 14.8 (0.583) 38.2 (1.504)) 14.74 (0.580) 15.74 (0.620) 18.9 (0.744) 68 ch91 3.80 (0.150) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) 70 ch92 7.40 (0.291) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) 72 ch93 11.1 (0.437) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) 74 ch94 14.8 (0.583) 40.6 (1.598) 19.52 (0.769) 21.12 (0.831) 24.0 (0.945) symbol min. max. notes b 0.45 0.55 1 (0.018) (0.022) e 2.49 2.59 2 (0.098) (0.102) l 2.04 3.04 1 (0.080) (0.120) notes: 1 C all leads 2 C each space
71 c0g dielectric general specifications capacitance range 100 pf to 1.2 f (25c, 1.00.2 vrms (open circuit voltage) at 1 khz, for 100 pf use 1 mhz) capacitance tolerances 5%, 10%, 20% operating temperature range -55c to +125c temperature characteristic 0 30 ppm/c voltage ratings 1000 vdc thru 5000 vdc (+125c) dissipation factor 0.15% max. (25c, 1.00.2 vrms (open circuit voltage) at 1 khz, for 100 pf use 1 mhz) insulation resistance (+25c, at 500v) 100k m min., or 1000 m-f min., whichever is less insulation resistance (+125c, at 500v) 10k m min., or 100 m-f min., whichever is less dielectric strength 120% rated voltage, 5 seconds life test 100% rated and +125c n1500 general specifications capacitance range 100 pf to 1.9 f (25c, 1.00.2 vrms (open circuit voltage) at 1 khz) capacitance tolerances 5%, 10%, 20% operating temperature range -55c to +125c temperature characteristic -1500 250 ppm/c voltage ratings 1000 vdc thru 5000 vdc (+125c) dissipation factor 0.15% max. (25c, 1.00.2 vrms (open circuit voltage) at 1 khz) insulation resistance (+25c, at 500v) 100k m min., or 1000 m-f min., whichever is less insulation resistance (+125c, at 500v) 10k m min., or 100 m-f min., whichever is less dielectric strength 120% rated voltage, 5 seconds life test 100% rated and +125c x7r dielectric general specifications capacitance range 100 pf to 15 f (25c, 1.00.2 vrms (open circuit voltage) at 1 khz) capacitance tolerances 10%, 20%, +80%, -20% operating temperature range -55c to +125c temperature characteristic 15% (0 vdc) voltage ratings 1000 vdc thru 5000 vdc (+125c) dissipation factor 2.5% max. (25c, 1.00.2 vrms (open circuit voltage) at 1 khz) insulation resistance (+25c, at 500v) 100k m min., or 1000 m-f min., whichever is less insulation resistance (+125c, at 500v) 10k m min., or 100 m-f min., whichever is less dielectric strength 120% rated voltage, 5 seconds life test 100% rated and +125c how to order avx styles: hv01 thru hv06 note: capacitors with x7r dielectrics are not intended for applications across ac supply mains or ac line filtering with polari ty reversal. contact plant for recommendations. high voltage dip leaded (hv style) hv avx style 01 size see dimensions chart a voltage 1k = a 2k = g 3k = h 4k = j 5k = k c temperature coefficient c0g = a x7r = c n1500 = 4 105 capacitance code (2 significant digits + number of zeros) 10 pf = 100 100 pf = 101 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 1f = 105 10 f = 106 100 f = 107 m capacitance tolerance c0g: j = 5% k = 10% m = 20% x7r: k = 10% m = 20% z = +80%, -20% n1500: j = 5% k = 10% m = 20% a test level a = does not apply n termination n = straight lead j = leads formed in l = leads formed out p = p style leads z = z style leads 650 height max dimension a 120 = 0.120" 240 = 0.240" 360 = 0.360" 480 = 0.480" 650 = 0.650" performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant
72 high voltage dip leaded (hv style) surface mount and thru-hole hv styles d a b 0.508 (0.020) ty p . 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) 6.35 (0.250) min. e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. n style leads e c rad. 0.254 (0.010) (typ) detail b 0.254 (0.010) typ. chip separation 0.254 (0.010) typ. 1.270 0.254 (0.050 0.010) 2.794 0.254 (0.110 0.010) 1.778 0.254 (0.070 0.010) 3.048 0.381 (0.120 0.015) detail b z style leads e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. b detail a 4.191 0.254 (0.165 0.010) 1.651 0.254 (0.065 0.010) 2.540 0.254 (0.100 0.010) 6.350 (0.250) min 1.016 0.254 (0.040 0.010) r 0.508 (0.020) 3 places capacitor detail a p style leads j style leads e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.905 (0.075) 0.635 (0.025) typ. 1.778 (0.070) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) e c chip separation 0.254 (0.010) typ. 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.778 (0.070) 1.905 (0.075) 0.635 (0.025) typ. 0.254 (0.010) l style leads no. of leads style a (max.) b (max.) c .635 (0.025) d .635 (0.025) e (max.) per side hv01 53.3 (2.100) 10.5 (0.415) 54.9 (2.160) 4 hv02 39.1 (1.540) 20.3 (0.800) 40.7 (1.600) 8 hv03 27.2 (1.070) 10.5 (0.415) 28.2 (1.130) 4 hv04 10.2 (0.400) 10.2 (0.400) 11.2 (0.440) 4 hv05 6.35 (0.250) 6.35 (0.250) 7.62 (0.300) 3 hv06 53.3 (2.100) 29.0 (1.140) 54.9 (2.160) 11 dimensions millimeters (inches) see page 73 for maximum a dimension for n style leads: a dimension plus 1.651 (0.065) for j & l style leads: a dimension plus 2.032 (0.080) for p style leads: a dimension plus 4.445 (0.175) for z style leads: a dimension plus 3.048 (0.120)
73 high voltage dip leaded (hv style) surface mount and thru-hole hv styles 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 1kv 2kv 3kv 4kv 5kv .086 .024 .011 .0062 .0052 .120 .034 .015 .0088 .0074 .042 .013 .0058 .0030 .0024 .012 .0040 .0018 .0009 .0007 .0048 .0013 .240 .066 .028 .018 .015 .140 .042 .018 .010 .0084 .200 .058 .024 .014 .012 .068 .020 .0090 .0050 .0040 .020 .0066 .0028 .0014 .0012 .0078 .0022 .380 .100 .046 .030 .026 1.10 .260 .150 .066 .052 1.50 .360 .200 .094 .078 .520 .130 .072 .032 .024 .160 .042 --- --- --- .060 --- 3.00 .700 .440 .200 .170 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 1kv 2kv 3kv 4kv 5kv .170 .048 .022 .012 .010 .240 .068 .031 .017 .015 .084 .026 .011 .0060 .0048 .025 .0082 .0036 .0018 .0014 .0096 .0027 .480 .130 .056 .036 .031 .280 .084 .036 .020 .016 .400 .110 .048 .028 .024 .130 .040 .018 .010 .0080 .040 .013 .0056 .0028 .0025 .015 .0044 .760 .210 .092 .060 .052 2.20 .520 .300 .130 .100 3.10 .720 .400 .180 .150 1.00 .270 .140 .064 .048 .330 .084 --- --- --- .120 --- 6.00 1.40 .880 .400 .340 max capacitance (f) available versus style with height (a) of 0.120" - 3.05mm max capacitance (f) available versus style with height (a) of 0.480" - 12.2mm max capacitance (f) available versus style with height (a) of 0.360" - 9.15mm max capacitance (f) available versus style with height (a) of 0.240" - 6.10mm max capacitance (f) available versus style with height (a) of 0.650" - 16.5mm hv01 _ _ _ _ _ _ an120 hv02 _ _ _ _ _ _ an120 hv03 _ _ _ _ _ _ an120 hv04 _ _ _ _ _ _ an120 hv05 _ _ _ _ _ _ an120 hv06 _ _ _ _ _ _ an120 avx style c0g n1500 x7r hv01 _ _ _ _ _ _ an240 hv02 _ _ _ _ _ _ an240 hv03 _ _ _ _ _ _ an240 hv04 _ _ _ _ _ _ an240 hv05 _ _ _ _ _ _ an240 hv06 _ _ _ _ _ _ an240 avx style c0g n1500 x7r 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 1kv 2kv 3kv 4kv 5kv .250 .072 .033 .018 .015 .360 .100 .047 .026 .022 .120 .039 .017 .0090 .0072 .038 .012 .0054 .0027 .0022 .014 .0040 .720 .200 .084 .055 .047 .420 .120 .055 .030 .025 .600 .170 .072 .043 .036 .200 .060 .027 .015 .012 .060 .020 .0084 .0043 .0037 .023 .0066 1.10 .310 .130 .090 .078 3.30 .780 .450 .200 .150 4.70 1.00 .600 .280 .230 1.50 .410 .210 .096 .072 .490 .120 --- --- --- .180 --- 9.00 2.10 1.30 .600 .510 hv01 _ _ _ _ _ _ an360 hv02 _ _ _ _ _ _ an360 hv03 _ _ _ _ _ _ an360 hv04 _ _ _ _ _ _ an360 hv05 _ _ _ _ _ _ an360 hv06 _ _ _ _ _ _ an360 avx style c0g n1500 x7r 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 1kv 2kv 3kv 4kv 5kv .340 .096 .044 .024 .020 .480 .130 .063 .035 .030 .160 .052 .023 .012 .0096 .051 .016 .0072 .0036 .0029 .019 .0054 .960 .260 .110 .073 .062 .560 .160 .073 .040 .033 .800 .230 .096 .057 .048 .270 .080 .036 .020 .016 .080 .026 .011 .0057 .0050 .031 .0088 1.50 .420 .180 .120 .100 4.40 1.00 .600 .260 .200 6.30 1.40 .800 .370 .310 2.00 .550 .280 .120 .096 .650 .160 --- --- --- .240 --- 12.0 2.80 1.70 .800 .68 hv01 _ _ _ _ _ _ an480 hv02 _ _ _ _ _ _ an480 hv03 _ _ _ _ _ _ an480 hv04 _ _ _ _ _ _ an480 hv05 _ _ _ _ _ _ an480 hv06 _ _ _ _ _ _ an480 avx style c0g n1500 x7r 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 3kv 4kv 5kv 1kv 2kv 1kv 2kv 3kv 4kv 5kv .430 .120 .056 .031 .026 .610 .170 .079 .044 .037 .210 .065 .029 .015 .012 .064 .020 .009 .0045 .0037 .024 .0068 1.20 .330 .140 .092 .078 .700 .210 .092 .050 .042 1.00 .290 .120 .072 .060 .340 .100 .045 .025 .020 .100 .033 .014 .0072 .0063 .039 .011 1.90 .530 .230 .150 .130 5.50 1.30 .750 .330 .260 7.90 1.80 1.00 .470 .390 2.60 .690 .360 .160 .120 .820 .210 --- --- --- .300 --- 15.0 3.50 2.20 1.00 .850 hv01 _ _ _ _ _ _ an650 hv02 _ _ _ _ _ _ an650 hv03 _ _ _ _ _ _ an650 hv04 _ _ _ _ _ _ an650 hv05 _ _ _ _ _ _ an650 hv06 _ _ _ _ _ _ an650 avx style c0g n1500 x7r
74 high voltage leaded (ch style) radial, dual-in-line & l lead smt 330 pf to 2.7 f 1kv to 5kv -55oc to +125oc 1b/c0g and 2c1/x7r dielectrics this range of radial, dual-in-line for both through hole and surface mount products is intended for use in high voltage power supplies and voltage multiplier circuits. the multilayer ceramic construction offers excellent volumetric efficiency compared with other high voltage dielectrics. they are suitable for both high reliability and industrial applications. temperature coefficient cecc 30 000, (4.24.1) 1b/c0g: a temperature coefficient - 0 30ppm/oc 2c1/x7r: c temperature characteristic - 15% (0v dc) capacitance test 25oc 1b/c0g: measured at 1 vrms max at 1khz (1mhz <100 pf) 2c1/x7r: measured at 1 vrms max at 1khz dissipation factor 25c 1b/c0g: 0.15% max at 1khz, 1 vrms (1mhz for <100 pf) 2c1/x7r: 2.5% max at 1khz, 1 vrms insulation resistance 1b/c0g & 2c1/x7r: 100k megohms or 1000 megohms-f, whichever is less dielectric withstanding voltage 25c 130% rated voltage for 5 seconds life test (1000 hrs) cecc 30000 (4.23) 1b/c0g & 2c1/x7r: 120% rated voltage at +125oc. aging 1b/c0g: zero 2c1/x7r: 2.5%/decade hour electrical specifications l max. 2.54 (0.100) 0.5 (0.200) 13 (0.512) 1.0 (0.039) 2.54 (0.100) 0.5 (0.200) 2.54 (0.100) 0.5 (0.200) 3.8 (0.149) max. 2.0 (0.079) max. 3.8 (0.149) max. l max. s 0.5 (0.020) s 0.5 (0.020) l2 l1 l2 l1 w max. w max. lw s no. of style leads (max) (max) (nom) per side ch41 9.2 (0.362) 8.7 (0.342) 8.2 (0.323) 3 ch51 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4 ch61 14.9 (0.587) 13.6 (0.535) 14.0 (0.551) 5 ch76 21.6 (0.850) 16.6 (0.654) 20.3* (0.800) 6 ch91 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14 dimensions millimeters (inches) dual-in-line *tolerance 0.8 how to order ch 41 a c 104 k a 8 0 a 7 style size voltage dielectric capacitance capacitance specification finish lead dia. lead space lead style code code code code code tolerance code code code code code a = 1kv a = c0g (2 significant c0g: j = 5% a = non customized 8 = varnish 0 = standard a = standard 0 = dual in line g = 2kv c = x7r digits + no. k = 10% straight h = 3kv of zeros) m = 20% 7 = dual in line j = 4kv eg. 105 = 1 f x7r: k = 10% l style k = 5kv 106 = 10 f m = 20% 107 = 100 f p = +100, -0% lead width 0.5 (0.020) lead thickness 0.254 (0.010) l1 = l2 0.5 (0.020) performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant
75 lhts lead style dia (max) (max) (max) (nom) (nom) cv41 10.6 (0.417) 8.70 (0.343) 3.80 (0.150) 8.20 (0.323) 0.70 (0.028) cv51 11.9 (0.469) 10.7 (0.421) 3.80 (0.150) 10.2 (0.402) 0.90 (0.035) cv61 16.5 (0.650) 13.6 (0.536) 3.80 (0.150) 15.2 (0.599) 0.90 (0.035) cv76 22.7 (0.893) 16.6 (0.654) 3.80 (0.150) 21.2* (0.835) 0.90 (0.035) cv91 22.7 (0.893) 40.6 (1.598) 3.80 (0.150) 21.2* (0.835) 1.20 (0.047) part number format (cvxxxxxxxxxxxa2) typical part number cv51ac154ma80a2 vertically mounted radial product high voltage leaded (cv style) chip assemblies *tolerance 0.8mm (0.031) dimensions millimeters (inches) t max. h max. 25 (0.984) 3 (0.118) lead dia. see table s 0.5 (0.020) l max. how to order cv 51 a c 154 m a 8 0 a 2 style size voltage dielectric capacitance capacitance specification finish lead dia. lead space lead style code code code code code tolerance code code code code code a = 1kv a = c0g (2 significant c0g: j = 5% a = non customized 8 = varnish 0 = standard a = standard g = 2kv c = x7r digits + no. k = 10% h = 3kv of zeros) m = 20% j = 4kv eg. 105 = 1 f x7r: k = 10% k = 5kv 106 = 10 f m = 20% 107 = 100 f p = +100, -0% not rohs compliant
76 cv41-ch41 cv51-ch51 cv61-ch61 cv76-ch76 cv91-ch91 styles styles styles styles styles cap pf 330 k 390 j k 470 j k 560 j k 680 j k 820 h j k 1000 h j k 1200 h j k 1500 h j k 1800 g h j k 2200 g h j k 2700 g h j k 3300 g g h j k 3900 g g h j k 4700 g g h j k 5600 a g h j k 6800 a g g h j k 8200 a g g h j k 10000 a g g h j k 12000 a a g h j k 15000 a a g g h j 18000 a g g h j 22000 a a g h 27000 a a g h 33000 a a g h 39000 a g g 47000 a a g 56000 a a g 68000 a a g 82000 ag 100000 ag 120000 a 150000 a 180000 a 220000 a 270000 a 330000 a 1b/c0g ultra stable ceramic nb figures in cells refer to size within ordering information high voltage leaded (ch/cv style) chip assemblies
77 2c1/x7r stable ceramic cv41-ch41 cv51-ch51 cv61-ch61 cv76-ch76 cv91-ch91 styles styles styles styles styles cap nf 1.2 k 1.3 k 1.5 j k 2.2 j k 2.7 j k 3.3 j k 3.9 j k 4.7 h j j k 5.6 h j k 6.8 h j k 8.2 g h j k 10 g h j k 12 g h j k 15 g h j k 18 a g h h j k 22 a g h j k 27 a g h j k 33 a g h j k 39 a a g h j k 47 a a g h j k 56 a a g h j k 68 a a g h j 82 a a g g h j 100 a a a g h j 120 a a a g h j 150 a a g h 180 a a a g h 220 a a a g 270 a a a g 330 a a g 390 a a a 470 a a a 560 a a a 680 a a 820 a a 1000 a a 1200 a 1500 a 1800 a 2200 a 2700 a nb figures in cells refer to size within ordering information high voltage leaded (ch/cv style) chip assemblies
78 high value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. avx special high voltage mlc radial leaded capacitors meet these performance characteristics. the added advantage of these capacitors lies in special internal design minimizing the electric field stresses within the mlc. these special design criteria result in significant reduction of partial discharge activity within the dielectric and having, therefore, a major impact on long- term reliability of the product. the sv high voltage radial capacitors are conformally coated with high insulation resistance, high dielectric strength epoxy eliminating the possibility of arc flashover. the sv high voltage radial mlc designs exhibit low esrs at high frequency. the same criteria governing the high voltage design carries the added benefits of extremely low esr in relatively low capacitance and small packages. these capacitors are designed and are ideally suited for applications such as snubbers in high frequency power converters, resonators in smps, and high voltage coupling/dc blocking. high voltage mlc radials (sv style) application information on high voltage mlc capacitors performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. c0g dielectric general specifications capacitance range 10 pf to .15 f (+25c, 1.0 0.2 vrms at 1khz, for 100 pf use 1 mhz) capacitance tolerances 5%; 10%; 20% operating temperature range -55c to +125c temperature characteristic 0 30 ppm/c voltage ratings 600 vdc thru 5000 vdc (+125c) dissipation factor 0.15% max. (+25c, 1.0 0.2 vrms at 1khz, for 100 pf use 1 mhz) insulation resistance (+25c, at 500v) 100k m min. or 1000 m-f min., whichever is less insulation resistance (+125c, at 500v) 10k m min., or 100 m-f min., whichever is less dielectric strength 120% rated voltage, 5 seconds life test 100% rated and +125c n1500 general specifications capacitance range 100 pf to 47 f (+25c, 1.0 0.2 vrms (open circuit voltage) at 1khz) capacitance tolerances 5%; 10%; 20% operating temperature range -55c to +125c temperature characteristic -1500 250 ppm/oc voltage ratings 600 vdc thru 5000 vdc (+125c) dissipation factor 0.15% max. (+25c, 1.0 0.2 vrms (open circuit voltage) at 1khz) insulation resistance (+25c, at 500v) 100k m min., or 1000 m-f min., whichever is less insulation resistance (+125c, at 500v) 10k m min., or 100 m-f min., whichever is less dielectric strength 120% rated voltage, 5 seconds life test 100% rated and +125c x7r dielectric general specifications capacitance range 100 pf to 2.2 f (+25c, 1.0 0.2 vrms at 1khz) capacitance tolerances 10%; 20%; +80%, -20% operating temperature range -55c to +125c temperature characteristic 15% (0 vdc) voltage ratings 600 vdc thru 5000 vdc (+125c) dissipation factor 2.5% max. (+25c, 1.0 0.2 vrms at 1khz) insulation resistance (+25c, at 500v) 100k m min., or 1000 m-f min., whichever is less insulation resistance (+125c, at 500v) 10k m min., or 100 m-f min., whichever is less dielectric strength 120% rated voltage, 5 seconds life test 100% rated and +125c
79 high voltage mlc radials (sv style) avx style length (l) height (h) thickness (t) lead spacing ld (nom) max max max .762 (.030) (s) sv01 6.35 (0.250) 5.59 (0.220) 5.08 (0.200) 4.32 (0.170) 0.64 (0.025) sv02/sv52 8.13 (0.320) 7.11 (0.280) 5.08 (0.200) 5.59 (0.220) 0.64 (0.025) sv03/sv53 9.40 (0.370) 7.62 (0.300) 5.08 (0.200) 6.99 (0.275) 0.64 (0.025) sv04/sv54 11.4 (0.450) 5.59 (0.220) 5.08 (0.200) 7.62 (0.300) 0.64 (0.025) sv05/sv55 11.9 (0.470) 10.2 (0.400) 5.08 (0.200) 9.52 (0.375) 0.64 (0.025) sv06/sv56 14.0 (0.550) 7.11 (0.280) 5.08 (0.200) 10.16 (0.400) 0.64 (0.025) sv07/sv57 14.5 (0.570) 12.7 (0.500) 5.08 (0.200) 12.1 (0.475) 0.64 (0.025) sv08/sv58 17.0 (0.670) 15.2 (0.600) 5.08 (0.200) 14.6 (0.575) 0.64 (0.025) sv09/sv59 19.6 (0.770) 18.3 (0.720) 5.08 (0.200) 17.1 (0.675) 0.64 (0.025) sv10 26.7 (1.050) 12.7 (0.500) 5.08 (0.200) 22.9 (0.900) 0.64 (0.025) sv11 31.8 (1.250) 15.2 (0.600) 5.08 (0.200) 27.9 (1.100) 0.64 (0.025) sv12 36.8 (1.450) 18.3 (0.720) 5.08 (0.200) 33.0 (1.300) 0.64 (0.025) sv13/sv63 7.62 (0.300) 9.14 (0.360) 5.08 (0.200) 5.08 (0.200) 0.51 (0.020) sv14/sv64 10.2 (0.400) 11.7 (0.460) 5.08 (0.200) 5.08 (0.200) 0.51 (0.020) sv15/sv65 12.7 (0.500) 14.2 (0.560) 5.08 (0.200) 10.2 (0.400) 0.64 (0.025) sv16/sv66 22.1 (0.870) 16.8 (0.660) 5.08 (0.200) 20.1 (0.790) 0.81 (0.032) sv17/sv67 23.6 (0.930) 19.8 (0.780) 6.35 (0.250) 20.3 (0.800) 0.81 (0.032) high voltage radial lead how to order avx styles: sv01 thru sv67 sv01 a a 102 k a a* avx voltage temperature capacitance code capacitance style 600v/630v = c coefficient (2 significant digits tolerance 1000v = a c0g = a + no. of zeros) c0g: j = 5% 1500v = s x7r = c examples: k = 10% 2000v = g n1500 = 4 10 pf = 100 m = 20% 2500v = w 100 pf = 101 x7r: k = 10% 3000v = h 1,000 pf = 102 m = 20% 4000v = j 22,000 pf = 223 z = +80 -20% 5000v = k 220,000 pf = 224 1 f = 105 lt h s 25.4 (1.000) min. ld ld s h h + 3.683 (0.145) 25.4 (1.000) min. l sv52 thru sv59 and sv63 thru sv67 note: capacitors with x7r dielectrics are not intended for applications across ac supply mains or ac line filtering with polarity reversal. contact plant for recommendations. * hi-rel screening consists of 100% group a, subgroup 1 per mil-prf-49467. (except partial discharge testing is not performed and dwv is at 120% rated voltage). dimensions millimeters (inches) sv01 thru sv17 packaging (see note 1) note 1: no suffix signifies bulk packaging which is avx standard packaging. use suffix tr1 if tape and reel is required. parts are reel packaged per eia-468. tape & reel quantity part pieces sv01 1000 sv02/sv52 1000 sv03/sv53 1000 sv04/sv54 1000 sv05/sv55 1000 sv06/sv56 500 sv07/sv57 500 sv08/sv58 500 sv09/sv59 500 sv10 n/a sv11 n/a sv12 n/a sv13/sv63 1000 sv14/sv64 1000 sv15/sv65 500 sv16/sv66 500 sv17/sv67 400 rohs part available sv01 yes sv02/sv52 yes sv03/sv53 yes sv04/sv54 yes sv05/sv55 yes sv06/sv56 yes sv07/sv57 yes sv08/sv58 yes sv09/sv59 yes sv10 yes sv11 yes sv12 yes sv13/sv63 yes sv14/sv64 yes sv15/sv65 yes sv16/sv66 yes sv17/sv67 yes te s t level a = standard b = hi-rel * leads a = tin/lead r = rohs compliant not rohs compliant for rohs compliant products, please select correct termination style.
80 c0g style 600/630v 1000v 1500v 2000v 2500v 3000v 4000v 5000v min./max. min./max. min./max. min./max. min./max. min./max. min./max. min./max. sv01 100 pf / 1500 pf 100 pf / 1000 pf 10 pf / 330 pf 10 pf / 220 pf 10 pf / 120 pf 10 pf / 82 pf sv02/sv52 100 pf / 6800 pf 100 pf / 4700 pf 100 pf / 1500 pf 10 pf / 1000 pf 10 pf / 680 pf 10 pf / 560 pf 10 pf / 150 pf 10 pf / 100 pf sv03/sv53 100 pf / 0.012 f 100 pf / 8200 pf 100 pf / 2700 pf 100 pf / 1800 pf 10 pf / 1000 pf 10 pf / 680 pf 10 pf / 390 pf 10 pf / 220 pf sv04/sv54 100 pf / 3900 pf 100 pf / 2700 pf 10 pf / 820 pf 10 pf / 560 pf 10 pf / 270 pf 10 pf / 180 pf 10 pf / 100 pf 10 pf / 68 pf sv05/sv55 1000 pf / 0.027 f 1000 pf / 0.018 f 100 pf / 6800 pf 100 pf / 4700 pf 100 pf / 2700 pf 100 pf / 1500 pf 10 pf /1000 pf 10 pf / 560 pf sv06/sv56 100 pf / 0.012 f 100 pf / 0.010 f 100 pf / 3300 pf 100 pf / 2200 pf 10 pf / 1200 pf 10 pf / 820 pf 10 pf / 470 pf 10 pf / 390 pf sv07/sv57 1000 pf / 0.056 f 1000 pf / 0.033 f 1000 pf / 0.015 f 100 pf / 0.010 f 100 pf / 5600 pf 100 pf / 3900 pf 100 pf /2200 pf 10 pf /1200 pf sv08/sv58 1000 pf / 0.082 f 1000 pf / 0.047 f 1000 pf / 0.022 f 1000 pf / 0.015 f 100 pf /0.010 f 100 pf / 6800 pf 100 pf /3300 pf 100 pf /2200 pf sv09/sv59 1000 pf / 0.150 f 1000 pf / 0.082 f 1000 pf / 0.039 f 1000 pf / 0.022 f 1000 pf /0.015 f 100 pf / 8200 pf 100 pf /4700 pf 100 pf /330 0 pf sv10 1000 pf / 0.100 f 1000 pf / 0.056 f 1000 pf / 0.022 f 1000 pf / 0.012 f 100 pf / 8200 pf 100 pf / 5600 pf 100 pf /3300 pf 100 pf /2200 pf sv11 1000 pf / 0.150 f 1000 pf / 0.082 f 1000 pf / 0.039 f 1000 pf / 0.022 f 1000 pf /0.015 f 100 pf / 8200 pf 100 pf /4700 pf 100 pf /3300 pf sv12 0.01 f / 0.220 f 0.01 f / 0.15 f 1000 pf / 0.056 f 1000 pf / 0.033 f 1000 pf /0.022 f 1000 pf / 0.015 f 100 pf /8200 pf 100 pf /5600 pf sv13/sv63 100 pf / 0.018 f 100 pf / 0.012 f 100 pf / 4700 pf 100 pf / 2700 pf 100 pf / 1800 pf 100 pf / 1000 pf 10 pf / 470 pf 10 pf / 390 pf sv14/sv64 1000 pf / 0.039 f 1000 pf / 0.022 f 100 pf / 8200 pf 100 pf / 5600 pf 100 pf / 3300 pf 100 pf / 1800 pf 10 pf / 820 pf 10 pf / 680 pf sv15/sv65 1000 pf / 0.056 f 1000 pf / 0.033 f 1000 pf /0.015 f 100 pf / 0.01 f 100 pf / 5600 pf 100 pf / 2700 pf 100 pf /1800 pf 100 pf /1200 pf sv16/sv66 1000 pf / 0.120 f 1000 pf / 0.082 f 1000 pf /0.039 f 1000 pf / 0.027 f 1000 pf /0.015 f 100 pf / 8200 pf 100 pf /4700 pf 100 pf /330 0 pf sv17/sv67 1000 pf / 0.150 f 1000 pf / 0.10 f 1000 pf /0.056 f 1000 pf / 0.039 f 1000 pf /0.022 f 1000 pf / 0.012 f 100 pf /6800 pf 100 pf /47 00 pf n1500 sv01 1000 pf / 2700 pf 1000 pf / 1800 pf 100 pf / 680 pf 100 pf / 470 pf 100 pf / 220 pf 100 pf / 150 pf sv02/sv52 1000 pf / 0.012 f 1000 pf / 8200 pf 1000 pf / 2700 pf 1000 pf / 1800 pf 100 pf / 1000 pf 100 pf / 680 pf 100 pf / 270 pf 100 pf / 150 pf sv03/sv53 0.010 pf / 0.027 f 0.010 pf / 0.018 f 1000 pf / 5600 pf 1000 pf / 3900 pf 1000 pf / 2200 pf 1000 pf / 1500 pf 100 pf / 680 pf 100 pf / 470 pf sv04/sv54 1000 pf / 8200 pf 1000 pf / 5600 pf 1000 pf / 1800 pf 100 pf / 1200 pf 100 pf / 560 pf 100 pf / 330 pf 100 pf / 220 pf 100 pf / 120 pf sv05/sv55 0.010 f / 0.068 f 0.010 f / 0.047 f 0.010 f / 0.015 f 1000 pf / 0.010 f 1000 pf / 5600 pf 1000 pf / 3300 pf 1000 pf /2200 pf 1000 p f /1200 pf sv06/sv56 0.010 f / 0.027 f 0.010 f / 0.018 f 1000 pf / 5600 pf 1000 pf / 3900 pf 1000 pf / 2200 pf 1000 pf / 1500 pf 100 pf / 680 pf 100 pf / 470 pf sv07/sv57 0.010 f / 0.12 f 0.010 f / 0.10 f 0.010 f / 0.027 f 0.010 f / 0.018 f 1000 pf /0.012 f 1000 pf / 5600 pf 1000 pf /3900 pf 1000 p f /2200 pf sv08/sv58 0.010 f / 0.15 f 0.010 f / 0.12 f 0.010 f / 0.047 f 0.010 pf / 0.033 f 0.010 f /0.018 f 1000 pf / 0.010 f 1000 pf /6800 pf 1000 pf /3900 pf sv09/sv59 0.10 f / 0.220 f 0.10 f / 0.18 f 0.010 f / 0.082 f 0.010 f / 0.047 f 0.010 pf /0.033 f 0.010 f / 0.015 f 1000 pf /8200 pf 1000 pf /6800 pf sv10 0.10 f / 0.18 f 0.10 f / 0.15 f 0.010 f / 0.047 f 0.010 f / 0.027 f 0.010 f /0.018 f 1000 pf / 0.010 f 1000 pf /5600 pf 1000 pf /390 0 pf sv11 0.10 f / 0.33 f 0.10 f / 0.22 f 0.010 f / 0.082 f 0.010 f / 0.039 f 0.010 f /0.027 f 0.010 f / 0.018 f 1000 pf /0.010 f 1000 pf /6 800 pf sv12 0.10 f / 0.47 f 0.10 f / 0.33 f 0.10 f / 0.12 f 0.010 f / 0.068 f 0.010 pf /0.047 f 0.010 f / 0.027 f 0.010 pf /0.015 f 1000 pf /0. 010 f sv13/sv63 0.010 f / 0.039 f 0.010 f / 0.027 f 1000 pf / 8200 pf 1000 pf / 5600 pf 1000 pf / 3300 pf 1000 pf / 1800 pf 100 pf / 820 pf 100 pf / 680 pf sv14/sv64 0.010 f / 0.082 f 0.010 f / 0.056 f 0.010 pf / 0.018 f 1000 pf / 0.012 f 1000 pf / 6800 pf 1000 pf / 3900 pf 1000 pf /1800 pf 1000 p f /1500 pf sv15/sv65 0.010 f / 0.10 f 0.010 f / 0.082 f 0.010 f / 0.027 f 0.010 pf / 0.018 f 1000 pf /0.012 f 1000 pf / 5600 pf 1000 pf /3300 pf 1000 pf /2700 pf sv16/sv66 0.10 f / 0.22 f 0.10 f / 0.18 f 0.010 f / 0.082 f 0.010 f / 0.039 f 0.010 f /0.027 f 0.010 f / 0.015 f 1000 pf /8200 pf 1000 pf /6800 pf sv17/sv67 0.10 f / 0.33 f 0.10 f / 0.22 f 0.010 f / 0.10 f 0.010 f / 0.056 f 0.010 f /0.027 f 0.010 f / 0.022 f 1000 pf /0.012 f 1000 pf /0.010 f x7r sv01 1000 pf / 0.018 f 1000 pf / 0.012 f 100 pf / 5600 pf 100 pf / 3900 pf sv02/sv52 1000 pf / 0.082 f 1000 pf / 0.047 f 1000 pf / 0.015 f 100 pf / 6800 pf 100 pf / 3900 pf 100 pf / 2700 pf sv03/sv53 1000 pf / 0.180 f 1000 pf / 0.082 f 1000 pf / 0.018 f 1000 pf / 0.01 f 100 pf / 6800 pf 100 pf / 4700 pf 100 pf /1800 pf sv04/sv54 1000 pf / 0.056 f 1000 pf / 0.033 f 100 pf / 6800 pf 100 pf / 3900 pf 100 pf / 2200 pf 100 pf / 1800 pf 100 pf / 820 pf sv05/sv55 0.01 f / 0.470 f 0.01 f / 0.22 f 1000 pf / 0.056 f 1000 pf / 0.027 f 1000 pf /0.018 f 1000 pf / 0.012 f 100 pf /4700 pf sv06/sv56 0.01 f / 0.180 f 0.01 f / 0.10 f 1000 pf / 0.033 f 1000 pf / 0.012 f 100 pf / 8200 pf 100 pf / 6800 pf 100 pf /2700 pf 100 pf /1200 p f sv07/sv57 0.01 f / 0.820 f 0.01 f / 0.39 f 0.01 f / 0.10 f 1000 pf / 0.047 f 1000 pf /0.033 f 1000 pf / 0.027 f 1000 pf / 0.01 f 100 pf /68 00 pf sv08/sv58 0.01 f / 1.20 f 0.01 f / 0.68 f 0.01 f / 0.18 f 1000 pf / 0.082 f 1000 pf /0.068 f 1000 pf / 0.047 f 1000 pf /0.018 f 1000 pf /0 .012 f sv09/sv59 0.10 f / 1.80 f 0.10 f / 1.00 f 0.01 f / 0.27 f 0.01 f / 0.12 f 0.01 f / 0.10 f 1000 pf / 0.068 f 1000 pf /0.027 f 1000 pf /0.0 18 f sv10 0.01 f / 1.50 f 0.01 f / 0.82 f 0.01 f / 0.22 f 0.01 f / 0.10 f 1000 pf /0.082 f 1000 pf / 0.056 f 1000 pf /0.022 f 1000 pf /0.022 f sv11 0.10 f / 2.20 f 0.10 f / 1.2 f 0.01 f / 0.39 f 0.01 f / 0.18 f 0.01 f / 0.15 f 0.01 f / 0.10 f 1000 pf /0.039 f 1000 pf /0.027 f sv12 0.10 f / 3.90 f 0.10 f / 2.20 f 0.01 f / 0.56 f 0.01 f / 0.27 f 0.01 f / 0.22 f 0.01 f / 0.15 f 1000 pf /0.056 f 1000 pf /0.033 f sv13/sv63 0.01 f / 0.270 f 0.01 f / 0.10 f 1000 pf / 0.033 f 1000 pf / 0.012 f 1000 pf / 0.01 f 100 pf / 6800 pf 100 pf /2700 pf sv14/sv64 0.01 f / 0.470 f 0.01 f / 0.18 f 1000 pf / 0.068 f 1000 pf / 0.022 f 1000 pf /0.018 f 1000 pf / 0.015 f 100 pf /5600 pf sv15/sv65 0.01 f / 0.680 f 0.01 f / 0.33 f 0.01 f / 0.10 f 1000 pf / 0.033 f 1000 pf /0.027 f 1000 pf / 0.022 f 1000 pf /8200 pf 100 pf /47 00 pf sv16/sv66 0.01 f / 1.80 f 0.01 f / 1.0 f 0.01 f / 0.27 f 0.01 f / 0.12 f 0.01 f / 0.10 f 1000 pf / 0.068 f 1000 pf /0.027 f 1000 pf /0.01 8 f sv17/sv67 0.01 f / 2.20 f 0.01 f / 1.2 f 0.01 f / 0.39 f 0.01 f / 0.15 f 0.01 f / 0.12 f 1000 pf / 0.082 f 1000 pf /0.039 f 1000 pf /0.02 7 f high voltage mlc radials (sv style) note: contact factory for other voltage ratings or values. capacitance value
81 high voltage dscc radials specification # description capacitance range 87046 c0g-1000 vdc 10 pf - 0.025 f 87043 x7r-1000 vdc 100 pf - 0.47 f 87040 x7r-2000 vdc 100 pf - 0.22 f 87114 c0g-3000 vdc 10 pf - 8200 pf 87047 x7r-3000 vdc 100 pf - 0.1 f 87076 c0g-4000 vdc 10 pf - 6800 pf 89044 x7r-4000 vdc 100 pf - 0.056 f 87077 c0g-5000 vdc 10 pf - 5600 pf 87070 x7r-5000 vdc 100 pf - 0.033 f avx is qualified to the following dscc drawings requirement test method inspection paragraph of paragraph of sampling procedure mil \ prf \ 49467 mil \ prf \ 49467 subgroup 1 thermal shock 3.6 4.8.2.1 100% inspection voltage conditioning 3.6 4.8.2.2 subgroup 2 visual and mechanical examination: material 3.4 and 3.4.1 4.8.4 physical dimensions 3.1 13 samples interface requirements 0 failures (other than physical dimensions) 3.5 marking 3.25 workmanship 3.27 subgroup 4 13 samples solderability 3.13 4.8.9 0 failures group a inspection requirement test method number of number of inspection paragraph of paragraph of sample units defectives mil \ prf \ 49467 mil \ prf \ 4946 to be inspected permitted subgroup 1 terminal strength 3.18 4.8.14 12 1 resistance to soldering heat 3.11 4.8.7 moisture resistance 3.19 4.8.15 subgroup 2 1 voltage \ temperature limits** 3.14 4.8.10 61 low temperature storage 3.23 4.8.19 marking legibility 3.25.1 4.8.1.1 subgroup 3 41 resistance to solvents 3.21 4.8.17 subgroup 3 life (at elevated ambient temperature) 3.21 4.8.17 10 1 group b inspection* *customers may accept at their discretion, a certificate of compliance with group b requirements in lieu of performing group b tests. **for steps e, f & g in table vii of mil-prf-49467, 500 vdc shall be applied.
82 ceramic layer electrode terminated edge terminated edge end terminations margin electrodes mlc chip capacitors basic construction terminations ? standard nickel barrier lead free tin plate (rohs compliant) 5% minimum lead plated ? leach resistance to 90 seconds at 260c ? solderable plated for dimensional control ? special materials as required avx focus is customer satisfaction C customer satisfaction in the broadest sense: products, service, price, delivery, tech- nical support, and all the aspects of a business that impact you, the customer. our long term strategy is for continuous improvement which is defined by our quality vision 2000. this is a total quality management system developed by and supported by avx corporate management. the foundation of qv2000 is built upon military and commercial standards and systems including iso9001. qv2000 is a natural extension of past quality efforts with world class techniques for ensuring a total quality environment to satisfy our customers during this decade and into the 21st century. as your components supplier, we invite you to experience the quality, service, and commitment of avx. a multilayer ceramic (mlc) capacitor is a monolithic block of ceramic containing two sets of offset, interleaved planar electrodes that extend to two opposite surfaces of the ceramic dielectric. this simple structure requires a considerable amount of sophistication, both in material and in manufacture, to produce it in the quality and quantities needed in todays electronic equipment. quality statement performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
83 table 1: eia and mil temperature stable and general application codes in specifying capacitance change with temperature for class 2 materials, eia expresses the capacitance change over an operating temperature range by a 3 symbol code. the first symbol represents the cold temperature end of the temperature range, the second represents the upper limit of the operating temperature range and the third symbol repre- sents the capacitance change allowed over the operating temperature range. table 1 provides a detailed explanation of the eia system. effects of voltage C variations in voltage have little effect on class 1 dielectric but does affect the capacitance and dissipation factor of class 2 dielectrics. the application of dc voltage reduces both the capacitance and dissipation factor while the application of an ac voltage within a reasonable range tends to increase both capacitance and dissipation factor readings. if a high enough ac voltage is applied, eventually it will reduce capacitance just as a dc voltage will. figure 2 shows the effects of ac voltage. cap. change vs. a.c. volts x7r figure 2 capacitor specifications specify the ac voltage at which to measure (normally 0.5 or 1 vac) and application of the wrong voltage can cause spurious readings. typical cap. change vs. temperature x7r figure 3 50 40 30 20 10 0 12.5 25 37.5 50 volts ac at 1.0 khz capacitance change percent mil code symbol temperature range a -55c to +85c b -55c to +125c c -55c to +150c symbol cap. change cap. change zero volts rated volts q +15%, -15% +15%, -50% r +15%, -15% +15%, -40% w +22%, -56% +22%, -66% x +15%, -15% +15%, -25% y +30%, -70% +30%, -80% z +20%, -20% +20%, -30% temperature characteristic is specified by combining range and change symbols, for example br or aw. specification slash sheets indicate the characteristic applicable to a given style of capacitor. eia code percent capacity change over temperature range rs198 temperature range x7 -55c to +125c x5 -55c to +85c y5 -30c to +85c z5 +10c to +85c code percent capacity change d 3.3% e 4.7% f 7.5% p 10% r 15% s 22% t +22%, -33% u +22%, - 56% v +22%, -82% example C a capacitor is desired with the capacitance value at 25c to increase no more than 7.5% or decrease no more than 7.5% from -30c to +85c. eia code will be y5f. 0vdc -55 -35 -15 +5 +25 +45 +65 +85 +105 +125 temperature degrees centigrade capacitance change percent +20 +10 0 -10 -20 -30 general description performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
84 general description effects of time C class 2 ceramic capacitors change capacitance and dissipation factor with time as well as temperature, voltage and frequency. this change with time is known as aging. aging is caused by a gradual re-alignment of the crystalline structure of the ceramic and produces an exponential loss in capacitance and decrease in dissipation factor versus time. a typical curve of aging rate for semi- stable ceramics is shown in figure 4. if a class 2 ceramic capacitor that has been sitting on the shelf for a period of time, is heated above its curie point, (125c for 4 hours or 150c for 1 ? 2 hour will suffice) the part will de-age and return to its initial capacitance and dissi- pation factor readings. because the capacitance changes rapidly, immediately after de-aging, the basic capacitance measurements are normally referred to a time period some- time after the de-aging process. various manufacturers use different time bases but the most popular one is one day or twenty-four hours after last heat. change in the aging curve can be caused by the application of voltage and other stresses. the possible changes in capacitance due to de-aging by heating the unit explain why capacitance changes are allowed after test, such as temperature cycling, moisture resistance, etc., in mil specs. the application of high voltages such as dielectric withstanding voltages also tends to de-age capacitors and is why re-reading of capacitance after 12 or 24 hours is allowed in military specifications after dielectric strength tests have been performed. typical curve of aging rate x7r figure 4 effects of frequency C frequency affects capacitance and impedance characteristics of capacitors. this effect is much more pronounced in high dielectric constant ceramic formulation than in low k formulations. avxs spicalci software generates impedance, esr, series inductance, series resonant frequency and capacitance all as functions of frequency, temperature and dc bias for standard chip sizes and styles. it is available free from avx and can be downloaded for free from avx website: www.avx.com. effects of mechanical stress C high k dielectric ceramic capacitors exhibit some low level piezoelectric reactions under mechanical stress. as a general statement, the piezo- electric output is higher, the higher the dielectric constant of the ceramic. it is desirable to investigate this effect before using high k dielectrics as coupling capacitors in extreme- ly low level applications. reliability C historically ceramic capacitors have been one of the most reliable types of capacitors in use today. the approximate formula for the reliability of a ceramic capacitor is: l o = v t x t t y l t v o t o where l o = operating life t t = test temperature and l t = test life t o = operating temperature v t = test voltage in c v o = operating voltage x,y = see text historically for ceramic capacitors exponent x has been considered as 3. the exponent y for temperature effects typically tends to run about 8. 1 10 100 1000 10,000 100,000 hours capacitance change percent +1.5 0 -1.5 -3.0 -4.5 -6.0 -7.5 characteristic max. aging rate %/decade c0g (np0) x7r, x5r none 2
85 a capacitor is a component which is capable of storing electrical energy. it consists of two conductive plates (elec- trodes) separated by insulating material which is called the dielectric. a typical formula for determining capacitance is: c = .224 ka t c = capacitance (picofarads) k = dielectric constant (vacuum = 1) a = area in square inches t = separation between the plates in inches (thickness of dielectric) .224 = conversion constant (.0884 for metric system in cm) capacitance C the standard unit of capacitance is the farad. a capacitor has a capacitance of 1 farad when 1 coulomb charges it to 1 volt. one farad is a very large unit and most capacitors have values in the micro (10 -6 ), nano (10 -9 ) or pico (10 -12 ) farad level. dielectric constant C in the formula for capacitance given above the dielectric constant of a vacuum is arbitrarily cho- sen as the number 1. dielectric constants of other materials are then compared to the dielectric constant of a vacuum. dielectric thickness C capacitance is indirectly propor- tional to the separation between electrodes. lower voltage requirements mean thinner dielectrics and greater capaci- tance per volume. area C capacitance is directly proportional to the area of the electrodes. since the other variables in the equation are usually set by the performance desired, area is the easiest parameter to modify to obtain a specific capacitance within a material group. energy stored C the energy which can be stored in a capacitor is given by the formula: e = 1 ? 2 cv 2 e = energy in joules (watts-sec) v = applied voltage c = capacitance in farads potential change C a capacitor is a reactive component which reacts against a change in potential across it. this is shown by the equation for the linear charge of a capacitor: i ideal = c dv dt where i = current c = capacitance dv/dt = slope of voltage transition across capacitor thus an infinite current would be required to instantly change the potential across a capacitor. the amount of current a capacitor can sink is determined by the above equation. equivalent circuit C a capacitor, as a practical device, exhibits not only capacitance but also resistance and inductance. a simplified schematic for the equivalent circuit is: c = capacitance l = inductance r s = series resistance r p = parallel resistance reactance C since the insulation resistance (r p ) is normally very high, the total impedance of a capacitor is: z = r 2 s + (x c - x l ) 2 where z = total impedance r s = series resistance x c = capacitive reactance = 1 2 fc x l = inductive reactance = 2 fl the variation of a capacitors impedance with frequency determines its effectiveness in many applications. phase angle C power factor and dissipation factor are often confused since they are both measures of the loss in a capacitor under ac application and are often almost iden- tical in value. in a perfect capacitor the current in the capacitor will lead the voltage by 90. in practice the current leads the voltage by some other phase angle due to the series resistance r s . the comple- ment of this angle is called the loss angle and: power factor (p.f.) = cos f or sine dissipation factor (d.f.) = tan for small values of the tan and sine are essentially equal which has led to the common interchangeability of the two terms in the industry. i (ideal) i (actual) phase angle loss angle v ir s f r l r c p s general description
86 general description equivalent series resistance C the term e.s.r. or equivalent series resistance combines all losses both series and parallel in a capacitor at a given frequency so that the equivalent circuit is reduced to a simple r-c series connection. dissipation factor C the df/pf of a capacitor tells what percent of the apparent power input will turn to heat in the capacitor. dissipation factor = e.s.r. = (2 fc) (e.s.r.) x c the watts loss are: watts loss = (2 fcv 2 ) (d.f.) very low values of dissipation factor are expressed as their reciprocal for convenience. these are called the q or quality factor of capacitors. parasitic inductance C the parasitic inductance of capac- itors is becoming more and more important in the decoupling of todays high speed digital systems. the relationship between the inductance and the ripple voltage induced on the dc voltage line can be seen from the simple inductance equation: v = l di dt the seen in current microprocessors can be as high as 0.3 a/ns, and up to 10a/ns. at 0.3 a/ns, 100ph of parasitic inductance can cause a voltage spike of 30mv. while this does not sound very drastic, with the vcc for microproces- sors decreasing at the current rate, this can be a fairly large percentage. another important, often overlooked, reason for knowing the parasitic inductance is the calculation of the resonant frequency. this can be important for high frequency, by-pass capacitors, as the resonant point will give the most signal attenuation. the resonant frequency is calculated from the simple equation: f res = 1 2 lc insulation resistance C insulation resistance is the resistance measured across the terminals of a capacitor and consists principally of the parallel resistance r p shown in the equivalent circuit. as capacitance values and hence the area of dielectric increases, the i.r. decreases and hence the product (c x ir or rc) is often specified in ohm farads or more commonly megohm-microfarads. leakage current is determined by dividing the rated voltage by ir (ohms law). dielectric strength C dielectric strength is an expression of the ability of a material to withstand an electrical stress. although dielectric strength is ordinarily expressed in volts, it is actually dependent on the thickness of the dielectric and thus is also more generically a function of volts/mil. dielectric absorption C a capacitor does not discharge instantaneously upon application of a short circuit, but drains gradually after the capacitance proper has been discharged. it is common practice to measure the dielectric absorption by determining the reappearing voltage which appears across a capacitor at some point in time after it has been fully discharged under short circuit conditions. corona C corona is the ionization of air or other vapors which causes them to conduct current. it is especially prevalent in high voltage units but can occur with low voltages as well where high voltage gradients occur. the energy discharged degrades the performance of the capacitor and can in time cause catastrophic failures. e.s.r. c di dt
87 surface mounting guide mlc chip capacitors component pads should be designed to achieve good solder filets and minimize component movement during reflow soldering. pad designs are given below for the most common sizes of multilayer ceramic capacitors for both wave and reflow soldering. the basis of these designs is: ? pad width equal to component width. it is permissible to decrease this to as low as 85% of component width but it is not advisable to go below this. ? pad overlap 0.5mm beneath component. ? pad extension 0.5mm beyond components for reflow and 1.0mm for wave soldering. d1 d2 d3 d4 d5 dimensions in millimeters (inches) reflow soldering component spacing for wave soldering com- ponents, must be spaced sufficiently far apart to avoid bridging or shadowing (inability of solder to penetrate properly into small spaces). this is less important for reflow soldering but sufficient space must be allowed to enable rework should it be required. preheat & soldering the rate of preheat should not exceed 4c/second to prevent thermal shock. a better maximum figure is about 2c/second. for capacitors size 1206 and below, with a maximum thickness of 1.25mm, it is generally permissible to allow a temperature differential from preheat to soldering of 150c. in all other cases this differential should not exceed 100c. for further specific application or process advice, please consult avx. cleaning care should be taken to ensure that the capacitors are thoroughly cleaned of flux residues especially the space beneath the capacitor. such residues may otherwise become conductive and effectively offer a low resistance bypass to the capacitor. ultrasonic cleaning is permissible, the recommended conditions being 8 watts/litre at 20-45 khz, with a process cycle of 2 minutes vapor rinse, 2 minutes immersion in the ultrasonic solvent bath and finally 2 minutes vapor rinse. d1 d2 d3 d4 d5 case size d1 d2 d3 d4 d5 0805 4.00 (0.15) 1.50 (0.06) 1.00 (0.04) 1.50 (0.06) 1.25 (0.05) 1206 5.00 (0.19) 1.50 (0.06) 2.00 (0.09) 1.50 (0.06) 1.60 (0.06) dimensions in millimeters (inches) component pad design case size d1 d2 d3 d4 d5 0805 (ld05) 3.00 (0.120) 1.00 (0.040) 1.00 (0.040) 1.00 (0.040) 1.25 (0.050) 1206 (ld06) 4.00 (0.160) 1.00 (0.040) 2.00 (0.090) 1.00 (0.040) 1.60 (0.060) *1210 (ld10) 4.00 (0.160) 1.00 (0.040) 2.00 (0.090) 1.00 (0.040) 2.50 (0.100) *1808 (ld08) 5.60 (0.220) 1.00 (0.040) 3.60 (0.140) 1.00 (0.040) 2.00 (0.080) *1812 (ld12) 5.60 (0.220) 1.00 (0.040) 3.60 (0.140) 1.00 (0.040) 3.00 (0.120) *1825 (ld13) 5.60 (0.220) 1.00 (0.040) 3.60 (0.140) 1.00 (0.040) 6.35 (0.250) *2220 (ld20) 6.60 (0.260) 1.00 (0.040) 4.60 (0.180) 1.00 (0.040) 5.00 (0.200) *2225 (ld14) 6.60 (0.260) 1.00 (0.040) 4.60 (0.180) 1.00 (0.040) 6.35 (0.250) *hqcc 6.60 (0.260) 1.00 (0.040) 4.60 (0.180) 1.00 (0.040) 6.35 (0.250) *3640 (ld40) 10.67 (0.427) 1.52 (0.060) 7.62 (0.300) 1.52 (0.060) 10.16 (0.400) *hqce 10.67 (0.427) 1.52 (0.060) 7.62 (0.300) 1.52 (0.060) 10.16 (0.400) millimeters (inches) *avx recommends reflow soldering only. wave soldering 1mm (0.04) 1.5mm (0.06) 1mm (0.04) performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
88 surface mounting guide recommended soldering profiles recommended reflow profiles 25 50 75 100 125 150 175 200 225 250 275 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 420 time / secs component temperature / oc maximum reflow profile with care recommended pb-free reflow profile recommended snpb reflow profile preheat p r e h e a t reflow r e f l o w cool down c o o l d o w n p r e h e a t w a v e c o o l d o w n reflow solder profiles avx rohs compliant products utilize termination finishes (e.g.sn or snag) that are compatible with all pb-free soldering systems and are fully reverse compatible with snpb soldering systems. a recommended snpb profile is shown for com- parison; for pb-free soldering, ipc/jedecj-std- 020c may be referenced. the upper line in the chart shows the maximum envelope to which products are qualified (typically 3x reflow cycles at 260oc max). the center line gives the recommended profile for optimum wettability and soldering in pb-free systems. 25 75 125 175 225 275 0 50 100 150 200 250 300 350 400 p r e h e a t r e f l o w c o o l d o w n preheat p r e h e a t wave w a v e cool down c o o l d o w n component temperature / oc time / seconds recommended soldering profiles wave solder profiles for wave solder, there is no change in the recommended wave profile; all standard pb-free (sncu/sncuag) systems operate at the same 260oc max recommended for snpb systems. preheat: this is more important for wave solder; a higher temperature preheat will reduce the thermal shock to smd parts that are immersed (please consult individual product data sheets for smd parts that are suited to wave solder). smd parts should ideally be heated from the bottom-side prior to wave. pth (pin through hole) parts on the topside should not be separately heated. wave: 250oc C 260oc recommended for optimum solderability. cool down: as with reflow solder, cool down should not be forced and 6oc/sec is recommended. any air knives at the end of the 2nd wave should be heated. preheat: the pre-heat stabilizes the part and reduces the temperature differential prior to reflow. the initial ramp to 125oc may be rapid, but from that point (2-3)oc/sec is recommended to allow ceramic parts to heat uniformly and plastic encapsulated parts to stabilize through the glass transition temperature of the body (~ 180oc). reflow: in the reflow phase, the maximum recommended time > 230oc is 40secs. time at peak reflow is 10secs max.; optimum reflow is achieved at 250oc, (see wetting balance chart opposite) but products are qualified to 260oc max. please reference individual product datasheets for maximum limits cool down: cool down should not be forced and 6oc/sec is recom- mended. a slow cool down will result in a finer grain structure of the reflow solder in the solder fillet. important note: typical pb-free reflow solders have a more dull and grainy appearance compared to traditional snpb. elevating the reflow temperature will not change this, but extending the cool down can help improve the visual appearance of the joint. -0.40 -0.30 -0.20 -0.10 0.00 0.10 0.20 0.30 0.40 200 210 220 230 240 250 260 270 temperature of solder [c] f [mn] snpb - sn60pb40 sn - sn60pb40 sn-sn3.5ag0.7cu sn-sn2.5ag1bi0.5cu sn-sn0.7cu p r e h e a t r e f l o w c o o l d o w n p r e h e a t w a v e c o o l d o w n wetting force at 2nd sec. (higher is better)
89 surface mounting guide mlc chip capacitors application notes storage good solderability is maintained for at least twelve months, provided the components are stored in their as received packaging at less than 40c and 70% rh. solderability terminations to be well soldered after immersion in a 60/40 tin/lead solder bath at 235 5c for 2 1 seconds. leaching terminations will resist leaching for at least the immersion times and conditions shown below. recommended soldering profiles lead-free reflow profile lead-free wave soldering the recommended peak temperature for lead-free wave soldering is 250c-260c for 3-5 seconds. the other para- meters of the profile remains the same as above. the following should be noted by customers changing from lead based systems to the new lead free pastes. a) the visual standards used for evaluation of solder joints will need to be modified as lead free joints are not as bright as with tin-lead pastes and the fillet may not be as large. b) resin color may darken slightly due to the increase in temperature required for the new pastes. c) lead-free solder pastes do not allow the same self align- ment as lead containing systems. standard mounting pads are acceptable, but machine set up may need to be modified. general surface mounting chip multilayer ceramic capacitors are designed for soldering to printed circuit boards or other substrates. the construction of the components is such that they will withstand the time/temperature profiles used in both wave and reflow soldering methods. handling chip multilayer ceramic capacitors should be handled with care to avoid damage or contamination from perspiration and skin oils. the use of tweezers or vacuum pick ups is strongly recommended for individual components. bulk handling should ensure that abrasion and mechanical shock are minimized. taped and reeled components provides the ideal medium for direct presentation to the placement machine. any mechanical shock should be minimized during handling chip multilayer ceramic capacitors. preheat it is important to avoid the possibility of thermal shock during soldering and carefully controlled preheat is therefore required. the rate of preheat should not exceed 4c/second termination type solder solder immersion time tin/lead/silver temp. c seconds nickel barrier 60/40/0 260 5 30 1 reflow 300 250 200 150 100 50 0 solder temp. 10 sec. max 1min 1min (minimize soldering time) natural cooling 220 c to 250 c preheat wave 300 250 200 150 100 50 0 solder temp. (preheat chips before soldering) t/maximum 150 c 3 sec. max 1 to 2 min preheat natural cooling 230 c to 250 c t 300 250 200 150 100 50 0 0 50 100 150 200 250 300 ? pre-heating: 150 c 15 c / 60-90 s ? max. peak g radient 2.5 c/ s ? peak temperature: 245 c 5 c ? time at >230 c: 40 s max. temperature c time ( s )
90 surface mounting guide mlc chip capacitors and a target figure 2c/second is recommended. although an 80c to 120c temperature differential is preferred, recent developments allow a temperature differential between the component surface and the soldering temper- ature of 150c (maximum) for capacitors of 1210 size and below with a maximum thickness of 1.25mm. the user is cautioned that the risk of thermal shock increases as chip size or temper-ature differential increases. soldering mildly activated rosin fluxes are preferred. the minimum amount of solder to give a good joint should be used. excessive solder can lead to damage from the stresses caused by the difference in coefficients of expansion between solder, chip and substrate. avx terminations are suitable for all wave and reflow soldering systems. if hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. cooling natural cooling in air is preferred, as this minimizes stresses within the soldered joint. when forced air cooling is used, cooling rate should not exceed 4c/second. quenching is not recommended but if used, maximum temperature differentials should be observed according to the preheat conditions above. cleaning flux residues may be hygroscopic or acidic and must be removed. avx mlc capacitors are acceptable for use with all of the solvents described in the specifications mil-std- 202 and eia-rs-198. alcohol based solvents are acceptable and properly controlled water cleaning systems are also acceptable. many other solvents have been proven successful, and most solvents that are acceptable to other components on circuit assemblies are equally acceptable for use with ceramic capacitors. post solder handling once smp components are soldered to the board, any bending or flexure of the pcb applies stresses to the sol- dered joints of the components. for leaded devices, the stresses are absorbed by the compliancy of the metal leads and generally dont result in problems unless the stress is large enough to fracture the soldered connection. ceramic capacitors are more susceptible to such stress because they dont have compliant leads and are brittle in nature. the most frequent failure mode is low dc resistance or short circuit. the second failure mode is significant loss of capacitance due to severing of contact between sets of the internal electrodes. cracks caused by mechanical flexure are very easily identi- fied and generally take one of the following two general forms: mechanical cracks are often hidden underneath the termina- tion and are difficult to see externally. however, if one end termination falls off during the removal process from pcb, this is one indication that the cause of failure was excessive mechanical stress due to board warping. ty p e a : angled crack between bottom of device to top of solder joint. type b: fracture from top of device to bottom of device.
91 surface mounting guide mlc chip capacitors pcb board design to avoid many of the handling problems, avx recommends that mlcs be located at least .2" away from nearest edge of board. however when this is not possible, avx recommends that the panel be routed along the cut line, adjacent to where the mlc is located. solder tip solder tip preferred method - no direct part contact poor method - direct contact with part no stress relief for mlcs routed cut line relieves stress on mlc common causes of mechanical cracking the most common source for mechanical stress is board depanelization equipment, such as manual breakapart, v- cutters and shear presses. improperly aligned or dull cutters may cause torqueing of the pcb resulting in flex stresses being transmitted to components near the board edge. another common source of flexural stress is contact during parametric testing when test points are probed. if the pcb is allowed to flex during the test cycle, nearby ceramic capac- itors may be broken. a third common source is board to board connections at vertical connectors where cables or other pcbs are con- nected to the pcb. if the board is not supported during the plug/unplug cycle, it may flex and cause damage to nearby components. special care should also be taken when handling large (>6" on a side) pcbs since they more easily flex or warp than smaller boards. reworking of mlcs thermal shock is common in mlcs that are manually attached or reworked with a soldering iron. avx strongly recommends that any reworking of mlcs be done with hot air reflow rather than soldering irons. it is practically impossi- ble to cause any thermal shock in ceramic capacitors when using hot air reflow. however direct contact by the soldering iron tip often caus- es thermal cracks that may fail at a later date. if rework by soldering iron is absolutely necessary, it is recommended that the wattage of the iron be less than 30 watts and the tip temperature be <300oc. rework should be performed by applying the solder iron tip to the pad and not directly contacting any part of the ceramic capacitor.
92 how to order military type designation: capacitors, fixed, ceramic dielectric, (temperature stable and general purpose), high reliability m123 mil-spec number a modification spec. 10 slash sheet number b voltage b = 50 c = 100 103 capacitance code bx temperature characteristic capacitance change with reference to 25oc over temperature range -55oc to +125oc symbol without with rated voltage dc voltage bp 0 30 ppm/oc 0 30 ppm/oc bx +15, -15% +15, -25% k capacitance tolerance c = 0.25pf d = 0.5pf f = 1% j = 5% k = 10% m = 20% s termination g = silver C nickel - gold m = palladium/silver s = silver C nickel C solder coated z = silver C nickel C solder plated (tin/lead alloy with a minimum of 4 percent lead) avx corp.s m123 series mil-qualified ceramic capacitors are designed for high performance applications in bx and br voltage levels, and for temperature stable applications in bp and bg voltage levels. the m123a10- m123a23 have been tested in accordance with mil-prf-123 specifications and are available in a wide range of values and tolerances. m123 series capacitors offer design and component engineers a proven technology for smd processing and applications requiring space-level reliability. they are designed for use in critical frequency applications, timing circuits, and applications where absolute stability is required (bp and bg), as well as in applications where a wider capacitance variation in temperature, voltage, frequency, and life span can be tolerated (bx and br). slash sheet case size dielectric cap range (pf) 10 0805 bp 1.0-680 bx 330-18,000 11 1210 bp 300-3,300 bx 5,600-100,000 12 1808 bp 300-1,000 bx 5,600-100,000 13 2225 bp 1,100-10,000 bx 120,000-1,000,000 21 1206 bp 1.0-2,200 bx 4,700-39,000 22 1812 bp 1,200-10,000 bx 27,000-180,000 23 1825 bp 3,900-20,000 bx 56,000-470,000 l w s t ( l) length ( w) width ( t) thickness ( s) termination band cks51, /10, 0805 size chip 2.03 (0.080) 1.27 (0.050) 0.508 (0.020) min. 0.508 (0.020) 0.381 (0.015) 0.381 (0.015) 1.40 (0.055) max. 0.254 (0.010) cks52, /11, 1210 size chip 3.05 (0.120) 2.54 (0.100) 0.508 (0.020) min. 0.508 (0.020) 0.381 (0.015) 0.381 (0.015) 1.65 (0.065) max. 0.254 (0.010) cks53, /12, 1808 size chip 4.57 (0.180) 2.03 (0.080) 0.508 (0.020) min. 0.508 (0.020) 0.381 (0.015) 0.381 (0.015) 1.65 (0.065) max. 0.254 (0.010) cks54, /13, 2225 size chip 5.59 (0.220) 6.35 (0.250) 0.508 (0.020) min. 0.508 (0.020) 0.381 (0.015) 0.381 (0.015) 1.78 (0.070) max. 0.254 (0.010) cks55, /21, 1206 size chip 3.05 (0.120) 1.52 (0.060) 0.508 (0.020) min. 0.508 (0.020) 0.381 (0.015) 0.381 (0.015) 1.65 (0.065) max. 0.254 (0.010) cks56, /22, 1812 size chip 4.57 (0.180) 3.18 (0.125) 0.508 (0.020) min. 0.508 (0.020) 0.381 (0.015) 0.381 (0.015) 2.03 (0.080) max. 0.254 (0.010) cks57, /23, 1825 size chip 4.57 (0.180) 6.35 (0.250) 0.508 (0.020) min. 0.508 (0.020) 0.381 (0.015) 0.381 (0.015) 2.03 (0.080) max. 0.254 (0.010) dimensions mm (inches) mil-prf-123/chips performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant
93 mil-prf-123/chips part number 1/ capacitance capacitance voltage- rated (0805 size chip) pf tolerance temperature voltage limits m123a10bp_1r0__ 1.0 c,d bp 50,100 m123a10bp_1r1__ 1.1 m123a10bp_1r2__ 1.2 m123a10bp_1r3__ 1.3 m123a10bp_1r5__ 1.5 m123a10bp_1r6__ 1.6 m123a10bp_1r8__ 1.8 m123a10bp_2r0__ 2.0 m123a10bp_2r2__ 2.2 m123a10bp_2r4__ 2.4 m123a10bp_2r7__ 2.7 m123a10bp_3r0__ 3.0 m123a10bp_3r3__ 3.3 m123a10bp_3r6__ 3.6 m123a10bp_3r9__ 3.9 m123a10bp_4r3__ 4.3 m123a10bp_4r7__ 4.7 m123a10bp_5r1__ 5.1 m123a10bp_5r6__ 5.6 m123a10bp_6r2__ 6.2 m123a10bp_6r8__ 6.8 m123a10bp_7r5__ 7.5 m123a10bp_8r2__ 8.2 m123a10bp_9r1__ 9.1 m123a10bp_100__ 10 c, j, k m123a10bp_110__ 11 m123a10bp_120__ 12 m123a10bp_130__ 13 m123a10bp_150__ 15 m123a10bp_160__ 16 m123a10bp_180__ 18 m123a10bp_200__ 20 m123a10bp_220__ 22 m123a10bp_240__ 24 m123a10bp_270__ 27 f, j, k m123a10bp_300__ 30 m123a10bp_330__ 33 m123a10bp_360__ 36 m123a10bp_390__ 39 m123a10bp_430__ 43 m123a10bp_470__ 47 m123a10bp_510__ 51 m123a10bp_560__ 56 m123a10bp_620__ 62 m123a10bp_680__ 68 m123a10bp_750__ 75 f, j, k bp 50,100 mil-prf-123/style cks51, -/10 part number 1/ capacitance capacitance voltage- rated (0805 size chip) pf tolerance temperature voltage limits m123a10bp_820__ 82 f, j, k bp 50,100 m123a10bp_910__ 91 m123a10bp_101__ 100 m123a10bp_111__ 110 m123a10bp_121__ 120 m123a10bp_131__ 130 m123a10bp_151__ 150 m123a10bp_161__ 160 m123a10bp_181__ 180 m123a10bp_201__ 200 m123a10bp_221__ 220 m123a10bp_241__ 240 m123a10bp_271__ 270 m123a10bp_301__ 300 m123a10bp_331__ 330 m123a10bp_361__ 360 m123a10bp_391__ 390 m123a10bp_431__ 430 m123a10bp_471__ 470 f,j,k bp 50,100 m123a10bpb511__ 510 f,j,k bp 50 m123a10bpb561__ 560 m123a10bpb621__ 620 m123a10bpb681__ 680 f,j,k bp 50 m123a10bx_331k_ 330 k bx 50,100 m123a10bx_391k_ 390 m123a10bx_471k_ 470 m123a10bx_561k_ 560 m123a10bx_681k_ 680 m123a10bx_821k_ 820 m123a10bx_102k_ 1,000 m123a10bx_122k_ 1,200 m123a10bx_152k_ 1,500 m123a10bx_182k_ 1,800 m123a10bx_222k_ 2,200 m123a10bx_272k_ 2,700 m123a10bx_332k_ 3,300 m123a10bx_392k_ 3,900 m123a10bx_472k_ 4,700 k bx 50,100 m123a10bxb562k_ 5,600 k bx 50 m123a10bxb682k_ 6,800 m123a10bxb822k_ 8,200 m123a10bxb103k_ 10,000 m123a10bxb123k_ 12,000 m123a10bxb153k_ 15,000 m123a10bxb183k_ 18,000 k bx 50
94 mil-prf-123/chips part number 1/ capacitance capacitance voltage- rated (1210 size chip) pf tolerance temperature voltage limits m123a11bp_301__ 300 f, j, k bp 50,100 m123a11bp_331__ 330 m123a11bp_361__ 360 m123a11bp_391__ 390 m123a11bp_431__ 430 m123a11bp_471__ 470 m123a11bp_511__ 510 m123a11bp_561__ 560 m123a11bp_621__ 620 m123a11bp_681__ 680 m123a11bp_751__ 750 m123a11bp_821__ 820 m123a11bp_911__ 910 m123a11bp_102__ 1,000 m123a11bp_112__ 1,100 m123a11bp_122__ 1,200 m123a11bp_132__ 1,300 m123a11bp_152__ 1,500 m123a11bp_162__ 1,600 m123a11bp_182__ 1,800 m123a11bp_202__ 2,000 m123a11bp_222__ 2,200 f, j, k bp 50,100 part number 1/ capacitance capacitance voltage- rated (1210 size chip) pf tolerance temperature voltage limits m123a11bpb242__ 2,400 f, j, k bp 50 m123a11bpb272__ 2,700 m123a11bpb302__ 3,000 m123a11bpb332__ 3,300 f, j, k bp 50 m123a11bx_562__ 5,600 k, m bx 50,100 m123a11bx_682__ 6,800 m123a11bx_822__ 8,200 m123a11bx_103__ 10,000 m123a11bx_123__ 12,000 m123a11bx_153__ 15,000 m123a11bx_183__ 18,000 m123a11bx_223__ 22,000 m123a11bx_273__ 27,000 k, m bx 50,100 m123a11bxb333__ 33,000 k, m bx 50 m123a11bxb393__ 39,000 m123a11bxb473__ 47,000 m123a11bxb563__ 56,000 m123a11bxb683__ 68,000 m123a11bxb823__ 82,000 m123a11bxb104__ 100,000 k, m bx 50 part number 1/ capacitance capacitance voltage- rated (1808 size chip) pf tolerance temperature voltage limits m123a12bp_301__ 300 f, j, k bp 50,100 m123a12bp_331__ 330 m123a12bp_361__ 360 m123a12bp_391__ 390 m123a12bp_431__ 430 m123a12bp_471__ 470 m123a12bp_511__ 510 m123a12bp_561__ 560 m123a12bp_621__ 620 m123a12bp_681__ 680 m123a12bp_751__ 750 m123a12bp_821__ 820 m123a12bp_911__ 910 m123a12bp_102__ 1,000 f, j, k bp 50,100 part number 1/ capacitance capacitance voltage- rated (1808 size chip) pf tolerance temperature voltage limits m123a12bx_562k_ 5,600 k bx 50,100 m123a12bx_682k_ 6,800 m123a12bx_822k_ 8,200 m123a12bx_103k_ 10,000 m123a12bx_123k_ 12,000 m123a12bx_153k_ 15,000 m123a12bx_183k_ 18,000 m123a12bx_223k_ 22,000 m123a12bx_273k_ 27,000 m123a12bx_333k_ 33,000 k bx 50,100 m123a12bxb393k_ 39,000 k bx 50 m123a12bxb473k_ 47,000 m123a12bxb563k_ 56,000 m123a12bxb683k_ 68,000 m123a12bxb823k_ 82,000 m123a12bxb104k_ 100,000 k bx 50 mil-prf-123/style cks53, -/12 part number 1/ capacitance capacitance voltage- rated (2225 size chip) pf tolerance temperature voltage limits m123a13bpb112__ 1,100 f, j, k bp 50 m123a13bpb122__ 1,200 m123a13bpb132__ 1,300 m123a13bpb152__ 1,500 m123a13bpb162__ 1,600 m123a13bpb182__ 1,800 m123a13bpb202__ 2,000 m123a13bpb222__ 2,200 m123a13bpb242__ 2,400 m123a13bpb272__ 2,700 m123a13bpb302__ 3,000 m123a13bpb332__ 3,300 m123a13bpb362__ 3,600 m123a13bpb392__ 3,900 m123a13bpb432__ 4,300 m123a13bpb472__ 4,700 m123a13bpb512__ 5,100 f, j, k bp 50 part number 1/ capacitance capacitance voltage- rated (2225 size chip) pf tolerance temperature voltage limits m123a13bpb562__ 5,600 f, j, k bp 50 m123a13bpb622__ 6,200 m123a13bpb682__ 6,800 m123a13bpb752__ 7,500 m123a13bpb822__ 8,200 m123a13bpb912__ 9,100 m123a13bpb103__ 10,000 f, j, k bp 50 m123a13bxb124k_ 120,000 k bx 50 m123a13bxb154k_ 150,000 m123a13bxb184k_ 180,000 m123a13bxb224k_ 220,000 m123a13bxb274k_ 270,000 m123a13bxb334k_ 330,000 m123a13bxb394k_ 394,000 m123a13bxb474k_ 474,000 m123a13bxb105k_ 1,000,000 k bx 50 mil-prf-123/style cks54, -/13 mil-prf-123/style cks52, -/11
95 mil-prf-123/chips part number 1/ capacitance capacitance voltage- rated (1206 size chip) pf tolerance temperature voltage limits m123a21bpc1r0__ 1.0 b, c bp 100 m123a21bpc1r1__ 1.1 m123a21bpc1r2__ 1.2 m123a21bpc1r3__ 1.3 m123a21bpc1r5__ 1.5 m123a21bpc1r6__ 1.6 m123a21bpc1r8__ 1.8 m123a21bpc2r0__ 2.0 m123a21bpc2r2__ 2.2 m123a21bpc2r4__ 2.4 b, c m123a21bpc2r7__ 2.7 b, c, d m123a21bpc3r0__ 3.0 m123a21bpc3r3__ 3.3 m123a21bpc3r6__ 3.6 m123a21bpc3r9__ 3.9 m123a21bpc4r3__ 4.3 m123a21bpc4r7__ 4.7 m123a21bpc5r1__ 5.1 m123a21bpc5r6__ 5.6 m123a21bpc6r2__ 6.2 m123a21bpc6r8__ 6.8 m123a21bpc7r5__ 7.5 m123a21bpc8r2__ 8.2 m123a21bpc9r1__ 9.1 b, c, d bp 100 part number 1/ capacitance capacitance voltage- rated (1206 size chip) pf tolerance temperature voltage limits m123a21bpc100__ 10 f, j, k bp 100 m123a21bpc110__ 11 m123a21bpc120__ 12 m123a21bpc130__ 13 m123a21bpc150__ 15 m123a21bpc160__ 16 m123a21bpc180__ 18 m123a21bpc200__ 20 m123a21bpc240__ 24 m123a21bpc270__ 27 m123a21bpc330__ 33 m123a21bpc360__ 36 m123a21bpc390__ 39 m123a21bpc430__ 43 m123a21bpc470__ 47 m123a21bpc510__ 51 m123a21bpc560__ 56 m123a21bpc620__ 62 m123a21bpc680__ 68 m123a21bpc750__ 75 m123a21bpc820__ 82 m123a21bpc910__ 91 m123a21bpc101__ 100 f, j, k bp 100 mil-prf-123/style cks55, -/21 part number 1/ capacitance capacitance voltage- rated (1206 size chip) pf tolerance temperature voltage limits m123a21bpc111__ 110 f, j, k bp 100 m123a21bpc121__ 120 m123a21bpc131__ 130 m123a21bpc151__ 150 m123a21bpc161__ 160 m123a21bpc181__ 180 m123a21bpc201__ 200 m123a21bpc221__ 220 m123a21bpc241__ 240 m123a21bpc271__ 270 m123a21bpc301__ 300 m123a21bpc331__ 330 m123a21bpc361__ 360 m123a21bpc391__ 390 m123a21bpc431__ 430 m123a21bpc471__ 470 m123a21bpc511__ 510 m123a21bpc561__ 560 m123a21bpc621__ 620 m123a21bpc681__ 680 m123a21bpc751__ 750 m123a21bpc821__ 820 m123a21bpc911__ 910 m123a21bpc102__ 1,000 f, j, k bp 100 part number 1/ capacitance capacitance voltage- rated (1206 size chip) pf tolerance temperature voltage limits m123a21bpb112__ 1,100 f, j, k bp 50 m123a21bpb122__ 1,200 m123a21bpb132__ 1,300 m123a21bpb152__ 1,500 m123a21bpb162__ 1,600 m123a21bpb182__ 1,800 m123a21bpb202__ 2,000 m123a21bpb222__ 2,200 f, j, k bp 50 m123a21bxc472__ 4,700 k, m bx 100 m123a21bxc562__ 5,600 m123a21bxc682__ 6,800 m123a21bxc822__ 8,200 m123a21bxc103__ 10,000 m123a21bxc123__ 12,000 m123a21bxc153__ 15,000 k, m bx 100 m123a21bxb183__ 18,000 k, m bx 50 m123a21bxb223__ 22,000 m123a21bxb273__ 27,000 m123a21bxb333__ 33,000 m123a21bxb393__ 39,000 k, m bx 50 mil-prf-123/style cks55, -/21
96 mil-prf-123/chips part number 1/ capacitance capacitance voltage- rated (1812 size chip) pf tolerance temperature voltage limits m123a22bpc122__ 1,200 f, j, k bp 100 m123a22bpc152__ 1,500 m123a22bpc182__ 1,800 m123a22bpc222__ 2,200 m123a22bpc242__ 2,400 m123a22bpc272__ 2,700 m123a22bpc302__ 3,000 m123a22bpc332__ 3,300 m123a22bpc362__ 3,600 m123a22bpc392__ 3,900 m123a22bpc432__ 4,300 m123a22bpc472__ 4,700 f, j, k bp 100 m123a22bpb512__ 5,100 f, j, k bp 50 m123a22bpb562__ 5,600 m123a22bpb622__ 6,200 m123a22bpb682__ 6,800 m123a22bpb752__ 7,500 m123a22bpb822__ 8,200 m123a22bpb912__ 9,100 m123a22bpb103__ 10,000 f, j, k bp 50 part number 1/ capacitance capacitance voltage- rated (1812 size chip) pf tolerance temperature voltage limits m123a22bxc273__ 27,000 k, m bx 100 m123a22bxc333__ 33,000 m123a22bxc393__ 39,000 m123a22bxc473__ 47,000 m123a22bxc563__ 56,000 k, m bx 100 m123a22bxb823__ 82,000 k, m bx 50 m123a22bxb104__ 100,000 m123a22bxb124__ 120,000 m123a22bxb154__ 150,000 m123a22bxb184__ 180,000 k, m bx 50 mil-prf-123/style cks56, -/22 part number 1/ capacitance capacitance voltage- rated (1825 size chip) pf tolerance temperature voltage limits m123a23bpc392__ 3,900 f, j, k bp 100 m123a23bpc472__ 4,700 m123a23bpc512__ 5,100 m123a23bpc562__ 5,600 m123a23bpc622__ 6,200 m123a23bpc682__ 6,800 m123a23bpc752__ 7,500 m123a23bpc822__ 8,200 m123a23bpc912__ 9,100 m123a23bpc103__ 10,000 f, j, k bp 100 m123a23bpb113__ 11,000 f, j, k bp 50 m123a23bpb123__ 12,000 m123a23bpb133__ 13,000 m123a23bpb153__ 15,000 m123a23bpb163__ 16,000 m123a23bpb183__ 18,000 m123a23bpb203__ 20,000 m123a23bpb223__ 22,000 f, j, k bp 50 part number 1/ capacitance capacitance voltage- rated (1825 size chip) pf tolerance temperature voltage limits m123a23bxc563__ 56,000 k, m bx 100 m123a23bxc683__ 68,000 m123a23bxc823__ 82,000 m123a23bxc104__ 100,000 m123a23bxc124__ 120,000 m123a23bxc154__ 150,000 k, m bx 100 m123a23bxb184__ 180,000 k, m bx 50 m123a23bxb224__ 220,000 m123a23bxb274__ 270,000 m123a23bxb334__ 330,000 m123a23bxb394__ 390,000 m123a23bxb474__ 470,000 k, m bx 50 mil-prf-123/style cks57, -/23
97 notes: capacitors with x7r dielectrics are not intended for applications across ac supply mains or ac line filtering with polar ity reversal. contact plant for recommendations. contact factory for availability of termination and tolerance options for specific part numbers. ** the 3640 style is not available on 7" reels. *** avx offers nonstandard chip sizes. contact factory for details. high voltage mlc chips for 600v to 5000v applications how to order size 0805 1206 1210* 1808* 1812* 1825* 2220* 2225* 3640* (l) length 2.01 0.20 3.20 0.20 3.20 0.20 4.57 0.25 4.50 0.30 4.50 0.30 5.70 0.40 5.72 0.25 9.14 0.25 (0.079 0.008) (0.126 0.008) (0.126 0.008) (0.180 0.010) (0.177 0.012) (0.177 0.012) (0.224 0.016) (0.225 0.010) (0.360 0.010) (w) width 1.25 0.20 1.60 0.20 2.50 0.20 2.03 0.25 3.20 0.20 6.40 0.30 5.00 0.40 6.35 0.25 10.2 0.25 (0.049 0.008) (0.063 0.008) (0.098 0.008) (0.080 0.010) (0.126 0.008) (0.252 0.012) (0.197 0.016) (0.250 0.010) (0.400 0.010) (t) thickness 1.30 1.52 1.70 2.03 2.54 2.54 3.30 2.54 2.54 max. (0.051) (0.060) (0.067) (0.080) (0.100) (0.100) (0.130) (0.100) (0.100) (t) terminal min. 0.50 0.25 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.76 (0.030) max. (0.020 0.010) 0.75 (0.030) 0.75 (0.030) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.52 (0.060) high value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. avx special high voltage mlc chip capacitors meet these performance characteristics and are designed for applications such as snubbers in high frequency power converters, resonators in smps, and high voltage coupling/dc blocking. these high voltage chip designs exhibit low esrs at high frequencies. larger physical sizes than normally encountered chips are used to make high voltage mlc chip products. special precautions must be taken in applying these chips in surface mount assemblies. the temperature gradient during heating or cooling cycles should not exceed 4oc per second. the preheat temperature must be within 50oc of the peak tem- perature reached by the ceramic bodies through the soldering process. chip sizes 1210 and larger should be reflow soldered only. capacitors may require protective surface coating to prevent external arcing. for 1825, 2225 and 3640 sizes, avx offers leaded version in either thru-hole or smt configurations (for details see section on high voltage leaded mlc chips). *reflow soldering only w l t t 1808 avx style 0805 1206 1210 1808 1812 1825 2220 2225 3640 *** a voltage 600v/630v = c 1000v = a 1500v = s 2000v = g 2500v = w 3000v = h 4000v = j 5000v = k a temperature coefficient c0g = a x7r = c 271 capacitance code (2 significant digits + no. of zeros) examples: 10 pf = 100 100 pf = 101 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 1 f = 105 k capacitance tolerance c0g:j = 5% k = 10% m = 20% x7r:k = 10% m = 20% z = +80%, -20% a test level a = standard 1 termination* 1 = pd/ag t = plated ni and sn (rohs compliant) 1 packaging 1 = 7" reel ** 3 = 13" reel 9 = bulk a special code a = standard *note: terminations with 5% minimum lead (pb) is available, see pages 99 and 100 for ld style. leaded terminations are available, see pages 101 and 102. new 630v range dimensions millimeters (inches) performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
98 voltage 0805 1206 1210 1808 1812 1825 2220 2225 3640 600/630 min. 10pf 10 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf 1000 pf max. 330pf 1200 pf 2700 pf 3300 pf 5600 pf 0.012 f 0.012 f 0.018 f 0.047 f min. 10pf 10 pf 10 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf 1000 max. 180pf 560 pf 1500 pf 2200 pf 3300 pf 8200 pf 0.010 f 0.010 f 0.022 f min. 10 pf 10 pf 10 pf 10 pf 100 pf 100 pf 100 pf 100 pf 1500 max. 270 pf 680 pf 820 pf 1800 pf 4700 pf 4700 pf 5600 pf 0.010 f min. 10 pf 10 pf 10 pf 10 pf 100 pf 100 pf 100 pf 100 pf 2000 max. 120 pf 270 pf 330 pf 1000 pf 1800 pf 2200 pf 2700 pf 6800 pf min. 10 pf 10 pf 10 pf 100 pf 100 pf 100 pf 2500 max. 180 pf 470 pf 1200 pf 1500 pf 1800 pf 3900 pf min. 10 pf 10 pf 10 pf 10 pf 10 pf 100 pf 3000 max. 120 pf 330 pf 820 pf 1000 pf 1200 pf 2700 pf min. 10 pf 10 pf 10 pf 10 pf 10 pf 100 pf 4000 max. 47 pf 150 pf 330 pf 470 pf 560 pf 1200 pf min. 10 pf 10 pf 10 pf 5000 max. 220 pf 270 pf 820 pf high voltage c0g capacitance values voltage 0805 1206 1210 1808 1812 1825 2220 2225 3640 600/630 min. 100pf 1000 pf 1000 pf 1000 pf 1000 pf 0.010 f 0.010 f 0.010 f 0.010 f max. 6800pf 0.022 f 0.056 f 0.068 f 0.120 f 0.270 f 0.270 f 0.330 f 0.560 f min. 100pf 100 pf 1000 pf 1000 pf 1000 pf 1000 pf 1000 pf 1000 pf 0.010 f 1000 max. 1500pf 6800 pf 0.015 f 0.018 f 0.039 f 0.100 f 0.120 f 0.150 f 0.220 f min. 100 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf 1000 pf 1500 max. 2700 pf 5600 pf 6800 pf 0.015 f 0.056 f 0.056 f 0.068 f 0.100 f min. 10 pf 100 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf 2000 max. 1500 pf 3300 pf 3300 pf 8200 pf 0.022 f 0.027 f 0.033 f 0.027 f min. 10 pf 10 pf 100 pf 100 pf 100 pf 1000 pf 2500 max. 2200 pf 5600 pf 0.015 f 0.018 f 0.022 f 0.022 f min. 10 pf 10 pf 100 pf 100 pf 100 pf 1000 pf 3000 max. 1800 pf 3900 pf 0.010 f 0.012 f 0.015 f 0.018 f min. 100 pf 4000 max. 6800 pf min. 100 pf 5000 max. 3300 pf high voltage x7r maximum capacitance values x7r dielectric performance characteristics capacitance range 10 pf to 0.047 f (25c, 1.0 0.2 vrms at 1khz, for 1000 pf use 1 mhz) capacitance tolerances 5%, 10%, 20% dissipation factor 0.1% max. (+25c, 1.0 0.2 vrms, 1khz, for 1000 pf use 1 mhz) operating temperature range -55c to +125c temperature characteristic 0 30 ppm/c (0 vdc) voltage ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 vdc (+125c) insulation resistance (+25c, at 500 vdc) 100k m min. or 1000 m - f min., whichever is less insulation resistance (+125c, at 500 vdc) 10k m min. or 100 m - f min., whichever is less dielectric strength minimum 120% rated voltage for 5 seconds at 50 ma max. current c0g dielectric performance characteristics capacitance range 10 pf to 0.56 f (25c, 1.0 0.2 vrms at 1khz) capacitance tolerances 10%; 20%; +80%, -20% dissipation factor 2.5% max. (+25c, 1.0 0.2 vrms, 1khz) operating temperature range -55c to +125c temperature characteristic 15% (0 vdc) voltage ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 vdc (+125c) insulation resistance (+25c, at 500 vdc) 100k m min. or 1000 m - f min., whichever is less insulation resistance (+125c, at 500 vdc) 10k m min. or 100 m - f min., whichever is less dielectric strength minimum 120% rated voltage for 5 seconds at 50 ma max. current high voltage mlc chips for 600v to 5000v applications
99 notes: capacitors with x7r dielectrics are not intended for applications across ac supply mains or ac line filtering with polar ity reversal. contact plant for recommendations. contact factory for availability of termination and tolerance options for specific part numbers. * flexiterm is not available in the ld40 style ** the 3640 style is not available on 7" reels. *** avx offers nonstandard chip sizes. contact factory for details. * reflow soldering only. high voltage mlc chips tin/lead termination b for 600v to 5000v applications how to order avx corporation will support those customers for commercial and military multilayer ceramic capacitors with a termination consisting of 5% minimum lead. this termination is indicated by the use of a b in the 12th position of the avx catalog part number. this fulfills avxs commitment to providing a full range of products to our customers. avx has provided in the following pages, a full range of values that we are offering in this b termination. larger physical sizes than normally encountered chips are used to make high voltage mlc chip product. special precautions must be taken in applying these chips in surface mount assemblies. the temperature gradient during heating or cooling cycles should not exceed 4oc per second. the preheat temperature must be within 50oc of the peak temperature reached by the ceramic bodies through the soldering process. chip sizes 1210 and larger should be reflow soldered only. capacitors may require protective surface coating to prevent external arcing. for 1825, 2225 and 3640 sizes, avx offers leaded version in either thru-hole or smt configurations (for details see section on high voltage leaded mlc chips). w l t t a temperature coefficient c0g = a x7r = c 271 capacitance code (2 significant digits + no. of zeros) examples: 10 pf = 100 100 pf = 101 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 1 f = 105 k capacitance tolerance c0g: j = 5% k = 10% m = 20% x7r: k = 10% m = 20% z = +80%, -20% a te s t level a = standard b termination b = 5% min pb x = flexiterm ? with 5% min. pb * 1 packaging 1 = 7" reel ** 3 = 13" reel 9 = bulk a special code a = standard a voltage 600v/630v = c 1000v = a 1500v = s 2000v = g 2500v = w 3000v = h 4000v = j 5000v = k new 630v range ld08 avx style ld05 - 0805 ld06 - 1206 ld10 - 1210 ld08 - 1808 ld12 - 1812 ld13 - 1825 ld20 - 2220 ld14 - 2225 ld40 - 3640 *** size ld05 (0805) ld06 (1206) ld10* (1210) ld08* (1808) ld12* (1812) ld13* (1825) ld20* (2220) ld14* (2225) ld40* (3640) (l) length 2.01 0.20 3.20 0.20 3.20 0.20 4.57 0.25 4.50 0.30 4.50 0.30 5.70 0.40 5.72 0.25 9.14 0.25 (0.079 0.008) (0.126 0.008) (0.126 0.008) (0.180 0.010) (0.177 0.012) (0.177 0.012) (0.224 0.016) (0.225 0.010) (0.360 0.010) (w) width 1.25 0.20 1.60 0.20 2.50 0.20 2.03 0.25 3.20 0.20 6.40 0.30 5.00 0.40 6.35 0.25 10.2 0.25 (0.049 0.008) (0.063 0.008) (0.098 0.008) (0.080 0.010) (0.126 0.008) (0.252 0.012) (0.197 0.016) (0.250 0.010) (0.400 0.010) (t) thickness 1.30 1.52 1.70 2.03 2.54 2.54 3.30 2.54 2.54 max. (0.051) (0.060) (0.067) (0.080) (0.100) (0.100) (0.130) (0.100) (0.100) (t) terminal min. 0.50 0.25 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.76 (0.030) max. (0.020 0.010) 0.75 (0.030) 0.75 (0.030) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.52 (0.060) dimensions millimeters (inches) performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant
100 x7r dielectric performance characteristics c0g dielectric performance characteristics capacitance range 10 pf to 0.047 f (25c, 1.0 0.2 vrms at 1khz, for 1000 pf use 1 mhz) capacitance tolerances 5%, 10%, 20% dissipation factor 0.1% max. (+25c, 1.0 0.2 vrms, 1khz, for 1000 pf use 1 mhz) operating temperature range -55c to +125c temperature characteristic 0 30 ppm/c (0 vdc) voltage ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 vdc (+125c) insulation resistance (+25c, at 500 vdc) 100k m min. or 1000 m - f min., whichever is less insulation resistance (+125c, at 500 vdc) 10k m min. or 100 m - f min., whichever is less dielectric strength minimum 120% rated voltage for 5 seconds at 50 ma max. current capacitance range 10 pf to 0.56 f (25c, 1.0 0.2 vrms at 1khz) capacitance tolerances 10%; 20%; +80%, -20% dissipation factor 2.5% max. (+25c, 1.0 0.2 vrms, 1khz) operating temperature range -55c to +125c temperature characteristic 15% (0 vdc) voltage ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 vdc (+125c) insulation resistance (+25c, at 500 vdc) 100k m min. or 1000 m - f min., whichever is less insulation resistance (+125c, at 500 vdc) 10k m min. or 100 m - f min., whichever is less dielectric strength minimum 120% rated voltage for 5 seconds at 50 ma max. current high voltage mlc chips tin/lead termination b for 600v to 5000v applications voltage ld05 (0805) ld06 (1206) ld10 (1210) ld08 (1808) ld12 (1812) ld13 (1825) ld20 (2220) ld14 (2225) ld40 (3640) 600/630 min. 10pf 10 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf 1000 pf max. 330pf 1200 pf 2700 pf 3300 pf 5600 pf 0.012 f 0.012 f 0.018 f 0.047 f min. 10pf 10 pf 10 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf 1000 max. 180pf 560 pf 1500 pf 2200 pf 3300 pf 8200 pf 0.010 f 0.010 f 0.022 f min. 10 pf 10 pf 10 pf 10 pf 100 pf 100 pf 100 pf 100 pf 1500 max. 270 pf 680 pf 820 pf 1800 pf 4700 pf 4700 pf 5600 pf 0.010 f min. 10 pf 10 pf 10 pf 10 pf 100 pf 100 pf 100 pf 100 pf 2000 max. 120 pf 270 pf 330 pf 1000 pf 1800 pf 2200 pf 2700 pf 6800 pf min. 10 pf 10 pf 10 pf 100 pf 100 pf 100 pf 2500 max. 180 pf 470 pf 1200 pf 1500 pf 1800 pf 3900 pf min. 10 pf 10 pf 10 pf 10 pf 10 pf 100 pf 3000 max. 120 pf 330 pf 820 pf 1000 pf 1200 pf 2700 pf high voltage c0g capacitance values high voltage x7r maximum capacitance values voltage 0805 1206 1210 1808 1812 1825 2220 2225 3640 600/630 min. 100pf 1000 pf 1000 pf 1000 pf 1000 pf 0.010 f 0.010 f 0.010 f 0.010 f max. 6800pf 0.022 f 0.056 f 0.068 f 0.120 f 0.270 f 0.270 f 0.330 f 0.560 f min. 100pf 100 pf 1000 pf 1000 pf 1000 pf 1000 pf 1000 pf 1000 pf 0.010 f 1000 max. 1500pf 6800 pf 0.015 f 0.018 f 0.039 f 0.100 f 0.120 f 0.150 f 0.220 f min. 100 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf 1000 pf 1500 max. 2700 pf 5600 pf 6800 pf 0.015 f 0.056 f 0.056 f 0.068 f 0.100 f min. 10 pf 100 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf 2000 max. 1500 pf 3300 pf 3300 pf 8200 pf 0.022 f 0.027 f 0.033 f 0.027 f min. 10 pf 10 pf 100 pf 100 pf 100 pf 1000 pf 2500 max. 2200 pf 5600 pf 0.015 f 0.018 f 0.022 f 0.022 f min. 10 pf 10 pf 100 pf 100 pf 100 pf 1000 pf 3000 max. 1800 pf 3900 pf 0.010 f 0.012 f 0.015 f 0.018 f min. 100 pf 4000 max. 6800 pf min. 100 pf 5000 max. 3300 pf
101 notes: capacitors with x7r dielectrics are not intended for applications across ac supply mains or ac line filtering with polar ity reversal. contact plant for recommendations. contact factory for availability of termination and tolerance options for specific part numbers. *** avx offers nonstandard chip sizes. contact factory for details. high voltage mlc chips flexiterm ? for 600v to 3000v applications how to order size 0805 1206 1210* 1808* 1812* 1825* 2220* 2225* (l) length 2.01 0.20 3.20 0.20 3.20 0.20 4.57 0.25 4.50 0.30 4.50 0.30 5.7 0.40 5.72 0.25 (0.079 0.008) (0.126 0.008) (0.126 0.008) (0.180 0.010) (0.177 0.012) (0.177 0.012) (0.224 0.016) (0.225 0.010) (w) width 1.25 0.20 1.60 0.20 2.50 0.20 2.03 0.25 3.20 0.20 6.40 0.30 5.0 0.40 6.35 0.25 (0.049 0.008) (0.063 0.008) (0.098 0.008) (0.080 0.010) (0.126 0.008) (0.252 0.012) (0.197 0.016) (0.250 0.010) (t) thickness 1.30 1.52 1.70 2.03 2.54 2.54 3.30 2.54 max. (0.051) (0.060) (0.067) (0.080) (0.100) (0.100) (0.130) (0.100) (t) terminal min. 0.50 0.25 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) max. (0.020 0.010) 0.75 (0.030) 0.75 (0.030) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) high value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. avx special high voltage mlc chips capac- itors meet these performance characteristics and are designed for applications such as snubbers in high frequency power converters, resonators in smps, and high voltage coupling/dc blocking. these high voltage chip designs exhibit low esrs at high frequencies. to make high voltage chips, larger physical sizes than are normally encountered are necessary. these larger sizes require that special precautions be taken in applying these chips in surface mount assemblies. in response to this, and to follow from the success of the flexiterm ? range of low voltage parts, avx is delighted to offer a flexiterm ? high voltage range of capacitors, flexiterm ? . the flexiterm ? layer is designed to enhance the mechanical flexure and tem- perature cycling performance of a standard ceramic capacitor, giving customers a solution where board flexure or temperature cycle damage are concerns. *reflow soldering only w l t t 1808 avx style 0805 1206 1210 1808 1812 1825 2220 2225 *** a voltage 600v/630v = c 1000v = a 1500v = s 2000v = g 2500v = w 3000v = h c temperature coefficient c0g = a x7r = c 272 capacitance code (2 significant digits + no. of zeros) examples: 10 pf = 100 100 pf = 101 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 1 f = 105 k capacitance tolerance c0g: j = 5% k = 10% m = 20% x7r: k = 10% m = 20% z = +80%, -20% a test level z termination* z = flexiterm ? 100% tin (rohs compliant) 1 packaging 1 = 7" reel 3 = 13" reel 9 = bulk a special code a = standard dimensions millimeters (inches) performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
102 voltage 0805 1206 1210 1808 1812 1825 2220 2225 600/630 min. 10pf 10 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf max. 330pf 1200 pf 2700 pf 3300 pf 5600 pf 0.012 f 0.012 f 0.018 f min. 10pf 10 pf 10 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 max. 180pf 560 pf 1500 pf 2200 pf 3300 pf 8200 pf 0.010 f 0.010 f min. 10 pf 10 pf 10 pf 10 pf 100 pf 100 pf 100 pf 1500 max. 270 pf 680 pf 820 pf 1800 pf 4700 pf 4700 pf 5600 pf min. 10 pf 10 pf 10 pf 10 pf 100 pf 100 pf 100 pf 2000 max. 120 pf 270 pf 330 pf 1000 pf 1800 pf 2200 pf 2700 pf min. 10 pf 10 pf 10 pf 100 pf 100 pf 2500 max. 180 pf 470 pf 1200 pf 1500 pf 1800 pf min. 10 pf 10 pf 10 pf 10 pf 10 pf 3000 max. 120 pf 330 pf 820 pf 1000 pf 1200 pf min. 10 pf 10 pf 10 pf 10 pf 10 pf 4000 max. 47 pf 150 pf 330 pf 470 pf 560 pf min. 10 pf 10 pf 5000 max. 220 pf 270 pf high voltage c0g capacitance values high voltage x7r maximum capacitance values x7r dielectric performance characteristics capacitance range 10 pf to 0.018 f (25c, 1.0 0.2 vrms at 1khz, for 1000 pf use 1 mhz) capacitance tolerances 5%, 10%, 20% dissipation factor 0.1% max. (+25c, 1.0 0.2 vrms, 1khz, for 1000 pf use 1 mhz) operating temperature range -55c to +125c temperature characteristic 0 30 ppm/c (0 vdc) voltage ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 vdc (+125c) insulation resistance (+25c, at 500 vdc) 100k m min. or 1000 m - f min., whichever is less insulation resistance (+125c, at 500 vdc) 10k m min. or 100 m - f min., whichever is less dielectric strength minimum 120% rated voltage for 5 seconds at 50 ma max. current capacitance range 10 pf to 0.33 f (25c, 1.0 0.2 vrms at 1khz) capacitance tolerances 10%; 20%; +80%, -20% dissipation factor 2.5% max. (+25c, 1.0 0.2 vrms, 1khz) operating temperature range -55c to +125c temperature characteristic 15% (0 vdc) voltage ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 vdc (+125c) insulation resistance (+25c, at 500 vdc) 100k m min. or 1000 m - f min., whichever is less insulation resistance (+125c, at 500 vdc) 10k m min. or 100 m - f min., whichever is less dielectric strength minimum 120% rated voltage for 5 seconds at 50 ma max. current high voltage mlc chips flexiterm ? for 600v to 5000v applications voltage 0805 1206 1210 1808 1812 1825 2220 2225 600/630 min. 100pf 1000 pf 1000 pf 1000 pf 1000 pf 0.010 f 0.010 f 0.010 f max. 6800pf 0.022 f 0.056 f 0.068 f 0.120 f 0.270 f 0.270 f 0.330 f min. 100pf 100 pf 1000 pf 1000 pf 1000 pf 1000 pf 1000 pf 1000 pf 1000 max. 1500pf 6800 pf 0.015 f 0.018 f 0.039 f 0.100 f 0.120 f 0.150 f min. 100 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 1000 pf 1500 max. 2700 pf 5600 pf 6800 pf 0.015 f 0.056 f 0.056 f 0.068 f min. 10 pf 100 pf 100 pf 100 pf 100 pf 1000 pf 1000 pf 2000 max. 1500 pf 3300 pf 3300 pf 8200 pf 0.022 f 0.027 f 0.033 f min. 10 pf 10 pf 100 pf 100 pf 100 pf 2500 max. 2200 pf 5600 pf 0.015 f 0.018 f 0.022 f min. 10 pf 10 pf 100 pf 100 pf 100 pf 3000 max. 1800 pf 3900 pf 0.010 pf 0.012 f 0.015 f c0g dielectric performance characteristics
103 note: capacitors with x7r dielectrics are not intended for applications across ac supply mains or ac line filtering with polari ty reversal. contact plant for recommendations. capacitors may require protective surface coating to prevent external arcing. high voltage mlc leaded chips for 600v to 5000v applications how to order no. of leads style a (max.) b (max.) c .635 (0.025) d .635 (0.025) e (max.) per side 1825 5.08 (0.200) 6.35 (0.250) 6.86 (0.270) 3 2225 2.54 (0.100) 6.35 (0.250) 6.35 (0.250) 7.62 (0.300) 3 3640 10.2 (0.400) 10.2 (0.400) 11.2 (0.440) 4 note: for w (epoxy coated) part add 0.127 (0.005) to max. and nominal dimensions a, b, d, & e dimensions millimeters (inches) for n style leads, b dimension = 4.19 (0.165) for j & l leads, b dimension = 4.58 (0.180) d a b 6.35 (0.250) min. 0.508 (0.020) typ. 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) e c 0.254 (0.010) typ. d a b 0.508 (0.020) typ. 2.54 (0.100) typ. 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) e c 0.254 (0.010) typ. 0.254 (0.010) rad. (typ.) 1.778 (0.070) 1.905 (0.075) 0.635 (0.025) typ. 0.254 (0.010) d a b 0.508 (0.020) ty p . 2.54 (0.100) ty p . 2.54 (0.100) max. 0.635 (0.025) min. 1.397 (0.055) 0.254 (0.010) c 0.254 (0.010) ty p . 0.254 (0.010) rad. (ty p . ) 1.905 (0.075) 0.635 (0.025) ty p . 1.778 (0.070) 0.254 (0.010) e n style leads j style leads l style leads 1825 avx style 1825 2225 3640 a voltage 600v/630v = c 1000v = a 1500v = s 2000v = g 2500v = w 3000v = h 4000v = j 5000v = k a temperature coefficient c0g = a x7r = c 271 capacitance code (2 significant digits + no. of zeros) examples: 10 pf = 100 100 pf = 101 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 k capacitance tolerance c0g:j = 5% k = 10% m = 20% x7r:k = 10% m = 20% z = +80%, -20% a test level a = standard v finish v = uncoated w = epoxy coated 00n lead style 00n = straight lead 00j = leads formed in 00l = leads formed out performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant
104 voltage 1825 2225 3640 600/630 min. 1000 pf 1000 pf 1000 pf max. 0.012 f 0.018 f 0.047 f min. 100 pf 1000 pf 1000 pf 1000 max. 8200 pf 0.010 f 0.022 f min. 100 pf 100 pf 100 pf 1500 max. 4700 pf 5600 pf 0.010 f min. 100 pf 100 pf 100 pf 2000 max. 1800 pf 2700 pf 6800 pf min. 10 pf 100 pf 100 pf 2500 max. 1200 pf 1800 pf 3900 pf min. 10 pf 10 pf 100 pf 3000 max. 8200 pf 1200 pf 2700 pf min. 10 pf 10 pf 100 pf 4000 max. 330 pf 560 pf 1200 pf min. 10 pf 10 pf 5000 max. 270 pf 820 pf high voltage c0g capacitance values high voltage x7r maximum capacitance values x7r dielectric performance characteristics capacitance range 10 pf to 0.047 f (25c, 1.0 0.2 vrms at 1khz, for 1000 pf use 1 mhz) capacitance tolerances 5%, 10%, 20% dissipation factor 0.15% max. (+25c, 1.0 0.2 vrms, 1khz, for 1000 pf use 1 mhz) operating temperature range -55c to +125c temperature characteristic 0 30 ppm/c (0 vdc) voltage ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 vdc (+125c) insulation resistance (+25c, at 500 vdc) 100k m min. or 1000 m - f min., whichever is less insulation resistance (+125c, at 500 vdc) 10k m min. or 100 m - f min., whichever is less dielectric strength minimum 120% rated voltage for 5 seconds at 50 ma max. current capacitance range 100 pf to 0.56 f (25c, 1.0 0.2 vrms at 1khz) capacitance tolerances 10%; 20%; +80%, -20% dissipation factor 2.5% max. (+25c, 1.0 0.2 vrms, 1khz) operating temperature range -55c to +125c temperature characteristic 15% (0 vdc) voltage ratings 600, 630, 1000, 1500, 2000, 2500, 3000, 4000 & 5000 vdc (+125c) insulation resistance (+25c, at 500 vdc) 100k m min. or 1000 m - f min., whichever is less insulation resistance (+125c, at 500 vdc) 10k m min. or 100 m - f min., whichever is less dielectric strength minimum 120% rated voltage for 5 seconds at 50 ma max. current high voltage mlc leaded chips for 600v to 5000v applications c0g dielectric performance characteristics voltage 1825 2225 3640 600/630 min. 0.010 f 0.010 f 0.010 f max. 0.270 f 0.330 f 0.560 f min. 1000 pf 1000 pf 0.010 f 1000 max. 0.100 f 0.150 f 0.220 f min. 1000 pf 1000 pf 1000 pf 1500 max. 0.056 f 0.068 f 0.100 f min. 100 pf 1000 pf 1000 pf 2000 max. 0.022 f 0.033 f 0.027 f min. 100 pf 100 pf 1000 pf 2500 max. 0.015 f 0.022 f 0.022 f min. 100 pf 100 pf 1000 pf 3000 max. 0.010 f 0.015 f 0.018 f min. 100 pf 4000 max. 6800 pf min. 100 pf 5000 max. 3300 pf
105 hi-q ? high rf power mlc surface mount capacitors for 600v to 7200v applications product offering hi-q ? , high rf power, surface mount mlc capacitors from avx corporation are characterized with ultra-low esr and dissipation factor at high frequencies. they are designed to handle high power and high voltage levels for applications in rf power amplifiers, inductive heating, high magnetic field environments (mri coils), medical and industrial electronics. how to order style hqcc hqce (l) length 5.84 +0.51 -0.25 9.65 +0.38 -0.25 (0.230 +0.020 -0.010) (0.380 +0.015 -0.010) (w) width 6.35 0.38 9.65 0.25 (0.250 0.015) (0.380 0.010) (t) thickness 3.68 (0.145) max. for max. capacitance values 680pf 4.32 (0.170) max. 4.19 (0.165) max. for capacitance values > 680pf (y) overlap 1.20 (0.040) max. 1.02 (0.040) max. dimensions millimeters (inches) l w t t hqcc avx style hqcc hqce hqlc hqle a voltage 300v = 9 500v = 7 1000v = a 1500v = s 2500v = w 3600v = j 5000v = k 7200v = m a temperature coefficient c0g = a p90 = m 271 capacitance code (2 significant digits + no. of zeros) examples: 4.7 pf = 4r7 10 pf = 100 100 pf = 101 1,000 pf = 102 j capacitance tolerance b = 0.1pf (<8.2pf) c = 0.25pf (<8.2pf) d = 0.50pf (<8.2pf) f = 1% ( 10pf) g = 2% j = 5% k = 10% m = 20% a test level a = standard style hqlc hqle (l) length 6.22 0.64 9.65 +0.89 -0.25 (0.245 0.025) (0.380 +0.035 -0.010) (w) width 6.35 0.38 9.65 0.25 (0.250 0.015) (0.380 0.010) (t) thickness 3.68 (0.145) max. for max. capacitance values 680pf 4.32 (0.170) max. 4.19 (0.165) max. for capacitance values 680pf (y) overlap n/a n/a (l l ) lead 12.7 min. 19.05 length (0.500) (0.750) (w l ) lead 6.10 0.127 8.89 0.25 width (0.240 0.005) (0.350 0.010) (t l ) lead 0.102 0.025 0.25 0.13 thickness (0.004 0.001) (0.010 0.005) lead high purity silver leads high purity silver leads material leads are attached with leads are attached with high temperature solder high temperature solder w l w lt l l t l w l w lt l l t l microstrip axial ribbon not rohs compliant lead-free compatible component for rohs compliant products, please select correct termination style. t termination* t = plated ni and sn (rohs compliant) j = 5% min pb 7 = plated ni and au a = axial ribbon m = microstrip h = cu/sn (non-magnetic) 1a packaging 1a = 7" reel* 6a = waffle pack *hqcc & hqce only
106 hqcc capacitance values (a dielectric) hi-q ? high rf power mlc surface mount capacitors for 600v to 7200v applications cap cap tol. rated code (pf) wvdc 1r0 1.0 1r2 1.2 1r5 1.5 1r8 1.8 2r2 2.2 2r7 2.7 b, c, d 2500 3r3 3.3 3r9 3.9 4r7 4.7 5r6 5.6 6r8 6.8 cap cap tol. rated code (pf) wvdc 8r2 8.2 b, c, d 100 10 120 12 150 15 180 18 220 22 f, g, j 2500 270 27 k, m 330 33 390 39 470 47 560 56 cap cap tol. rated code (pf) wvdc 680 68 820 82 101 100 121 120 2500 151 150 f, g, j 181 180 k, m 221 220 271 270 331 330 1500 391 390 cap cap tol. rated code (pf) wvdc 471 470 1500 561 560 681 680 821 820 1000 102 1000 f, g, j 122 1200 k, m 152 1500 500 182 1800 222 2200 300 272 2700 hqcc capacitance values (m dielectric) cap cap tol. rated code (pf) wvdc 1r0 1.0 1r1 1.1 1r2 1.2 1r3 1.3 1r4 1.4 1r5 1.5 1r6 1.6 1r7 1.7 1r8 1.8 1r9 1.9 b, c, d 2500 2r0 2.0 2r1 2.1 2r2 2.2 2r4 2.4 2r5 2.7 3r0 3.0 3r3 3.3 3r6 3.6 3r9 3.9 4r3 4.3 4r7 4.7 cap cap tol. rated code (pf) wvdc 5r1 5.1 5r6 5.6 6r2 6.2 6r8 6.8 b, c, d 7r5 7.5 8r2 8.2 9r1 9.1 100 10 110 11 120 12 2500 130 13 150 15 160 16 180 18 f, g, j 200 20 k, m 220 22 240 24 270 27 300 30 330 33 360 36 cap cap tol. rated code (pf) wvdc 390 39 430 43 470 47 510 51 560 56 620 62 680 68 750 75 820 82 910 91 f, g, j 2500 101 100 k, m 111 110 121 120 131 130 151 150 161 160 181 180 201 200 221 220 241 240 271 270 cap cap tol. rated code (pf) wvdc 301 300 331 330 361 360 1500 391 390 431 430 471 470 511 510 561 560 621 260 681 680 f, g, j 751 750 k, m 1000 821 820 911 910 102 1000 112 1100 122 1200 152 1500 500 182 1800 222 2220 242 2400 300 272 2700 capacitance range 1.0pf to 2,700pf (25c, 1.0 0.2 vrms at 1khz, for 1000 pf use 1mhz) capacitance tolerances 0.10pf, 0.25pf, 0.50pf, 1%, 2%, 5%, 10%, 20% dissipation factor 25c 0.1% max (+25c, 1.0 0.2 vrms at 1khz, for 1000 pf use 1mhz) operating temperature range -55c to +125c temperature characteristic c0g: 0 30 ppm/c (-55c to +125c), p90: 90 30 ppm/c (-55c to +125c) insulation resistance 100k m min. @ +25c and 500vdc 10k m min. @ +125c and 500vdc dielectric strength 250% of wvdc for capacitors rated at 500 volts dc or less for 5 seconds. 150% of wvdc for capacitors rated at 1250 volts dc or less for 5 seconds. 120% of wvdc for capacitors rated above 1250 volts dc or less for 5 seconds. dielectric performance characteristics
107 hi-q ? high rf power mlc surface mount capacitors for 600v to 7200v applications hqce capacitance values (a dielectric) cap cap tol. rated wvdc code (pf) standard extended 1r0 1.0 1r2 1.2 1r5 1.5 1r8 1.8 2r2 2.2 2r7 2.7 c, d 3r3 3.3 3600 7200 3r9 3.9 4r7 4.7 5r6 5.6 6r8 6.8 8r2 8.2 100 10 g, j, 120 12 k, m cap cap tol. rated wvdc code (pf) standard extended 150 15 180 18 220 22 270 27 330 33 390 39 7200 470 47 g, j, 3600 560 56 k, m 680 68 820 82 101 100 121 120 151 150 5000 181 180 cap cap tol. rated wvdc code (pf) standard extended 221 220 271 270 3600 331 330 391 390 471 470 561 560 g, j, 2500 681 680 k, m 821 820 na 102 1000 122 1200 1000 152 1500 182 1800 222 2200 hqce capacitance values (m dielectric) cap cap tol. rated wvdc code (pf) standard extended 1r0 1.0 1r2 1.2 1r5 1.5 1r8 1.8 2r2 2.2 2r7 2.7 b, c, d 3r3 3.3 3600 7200 3r9 3.9 4r7 4.7 5r6 5.6 6r8 6.8 8r2 8.2 100 10 f, g, j, 120 12 k, m 150 15 cap cap tol. rated wvdc code (pf) standard extended 180 18 220 22 270 27 330 33 390 39 7200 470 47 f, g, j, 560 56 k, m 3600 680 68 820 82 101 100 121 120 151 150 5000 181 180 221 220 3600 271 270 cap cap tol. rated wvdc code (pf) standard extended 331 330 3600 391 390 471 470 561 560 2500 681 680 f, g, j, 821 820 k, m 102 1000 na 122 1200 1000 152 1500 182 1800 222 2200 272 2700 332 3300 g, j 500 472 4700 k, m 512 5100
108 hi-q ? high rf power mlc surface mount capacitors for 600v to 7200v applications q vs. capacitance hqcc 100000 10000 1000 100 10 1 10 100 1000 10000 capacitance (pf) q 30 mhz 150 mhz 500 mhz (typical) current rating vs. capacitance hqcc 100 10 1 0.1 1 10 100 1000 10000 capacitance (pf) rms current (amps) 150 mhz 30 mhz dotted line = power dissipation limited solid line = voltage limited (vrms) 500 mhz 10 mhz the current rating is based on a 65? mounting surface and a device thermal resistance ( ) of 15?/w. a power dissipation of 4w will result in a case temperature of 125?. series resonance vs. capacitance hqcc 10000 1000 100 10 1 10 100 1000 10000 capacitance (pf) frequency (mhz) (typical) esr vs. capacitance hqcc 1 0.1 0.01 0.001 1 10 100 1000 10000 capacitance (pf) esr (ohms) 150 mhz 30 mhz (typical) 500 mhz hqcc performance characteristics (a dielectric) q vs. capacitance hqcc 100000 10000 1000 100 10 1 10 100 1000 10000 capacitance (pf) q 30 mhz 150 mhz 500 mhz (typical) esr vs. capacitance hqcc 1 0.1 0.01 0.001 1 10 100 1000 10000 capacitance (pf) esr (ohms) 150 mhz 30 mhz (typical) 500 mhz hqcc performance characteristics (m dielectric)
109 hi-q ? high rf power mlc surface mount capacitors for 600v to 7200v applications q vs. capacitance hqce 100000 10000 1000 100 1 10 100 1000 capacitance (pf) (1.0 pf to 400 pf) q 30 mhz (typical) esr vs. capacitance hqce 1 0.1 0.01 1 10 100 1000 capacitance (pf) (1.0 pf to 400 pf) esr (ohms) 30 mhz (typical) hqce performance characteristics (a dielectric) current rating vs. capacitance hqcc 100 10 1 0.1 1 10 100 1000 10000 capacitance (pf) rms current (amps) 150 mhz 30 mhz dotted line = power dissipation limited solid line = voltage limited (vrms) 500 mhz 10 mhz the current rating is based on a 65? mounting surface and a device thermal resistance ( ) of 15?/w. a power dissipation of 4w will result in a case temperature of 125?. series resonance vs. capacitance hqcc 10000 1000 100 10 1 10 100 1000 10000 capacitance (pf) frequency (mhz) (typical) q vs. capacitance hqce 1000 100 10 100 1000 10000 capacitance (pf) (430 pf to 2200 pf) q 30 mhz (typical) esr vs. capacitance hqce 0.1 0.01 0.001 100 1000 10000 capacitance (pf) (430 pf to 2200 pf) esr (ohms) 30 mhz (typical)
110 hi-q ? high rf power mlc surface mount capacitors for 600v to 7200v applications current rating vs. capacitance hqce 100 10 1 0.1 1 10 100 1000 capacitance (pf) (1.0 pf to 400 pf) rms current (amps) 2 mhz 30 mhz dotted line = power dissipation limited solid line = voltage limited (vrms) 10 mhz the current rating is based on a 65? mounting surface and a device thermal resistance ( ) of 12?/w. a power dissipation of 5w will result in a case temperature of 125?. series resonance vs. capacitance hqce 10000 1000 100 10 1 10 100 1000 10000 capacitance (pf) frequency (mhz) (typical) current rating vs. capacitance hqce 100 10 1 0.1 1 10 100 1000 capacitance (pf) (1.0 pf to 180 pf) rms current (amps) 2 mhz 30 mhz dotted line = power dissipation limited solid line = voltage limited (vrms) 10 mhz the current rating is based on a 65? mounting surface and a device thermal resistance ( ) of 12?/w. a power dissipation of 5w will result in a case temperature of 125?. current rating vs. capacitance hqce 100 10 1 100 1000 10000 capacitance (pf) (430 pf to 2200 pf) rms current (amps) 2 mhz 30 mhz dotted line = power dissipation limited solid line = voltage limited (vrms) 10 mhz the current rating is based on a 65? mounting surface and a device thermal resistance ( ) of 12?/w. a power dissipation of 5w will result in a case temperature of 125?. hqce performance characteristics (m dielectric) q vs capacitance hqce m dielectric 100000 10000 1000 100 1 10 100 1000 capacitance (1.0 pf to 400 pf) q 30 mhz (typical) esr vs capacitance hqce m dielectric 1 0.1 0.01 1 10 100 1000 capacitance (1.0 pf to 400 pf) esr (ohms) 30 mhz (typical)
111 hi-q ? high rf power mlc surface mount capacitors for 600v to 7200v applications q vs capacitance hqce m dielectric 1000 100 10 100 1000 10000 capacitance (430 pf to 5100 pf) q 30 mhz (typical) esr vs capacitance hqce m dielectric 1 0.1 0.01 100 1000 10000 capacitance (430 pf to 5100 pf) esr (ohms) 30 mhz (typical) current rating vs capacitance hqce m dielectric 100 10 1 0.1 1 10 100 1000 capacitance (1.0 pf to 400 pf) rms current (amps) dotted line = power dissipation limited solid line = voltage limited (vrms) the current rating is based on a 65? mounting surface and a device thermal resistance ( ) of 12?/w. a power dissipation of 5w will result in a case temperature of 125?. 30 mhz 10 mhz 2 mhz current rating vs capacitance hqce m dielectric 100 10 1 100 1000 10000 capacitance (430 pf to 5100 pf) rms current (amps) dotted line = power dissipation limited solid line = voltage limited (vrms) the current rating is based on a 65? mounting surface and a device thermal resistance ( ) of 12?/w. a power dissipation of 5w will result in a case temperature of 125?. 30 mhz 10 mhz 2 mhz series resonance vs capacitance hqce m dielectric 10000 1000 100 10 1 10 100 10000 1000 capacitance (pf) frequency (mhz) (typical)
112 tip & ring multilayer ceramic chip capacitors avx tip & ring or ring detector multilayer ceramic chip capacitors are designed as a standard telecom filter to block -48 volts dc telephone line voltage and pass subscribers ac signal pulse (16 to 25hz, 70 to 90vrms). the typical ringing signal is seen on figure on page 113. the ringer capacitors replace large leaded film capacitors and are ideal for telecom/modem applications. using avx tip & ring capacitors not only saves valuable real estate on the board and reduces the weight of overall product, but also features standard surface mounting capabilities, so critical to new and compact designs. the avx tip & ring capacitors are offered in standard eia sizes and standard values. they offer excellent high frequency performance, low esr and improved temperature performance over film capacitors. how to order 1812 p c 104 k a t 1 a avx voltage temp capacitance capacitance test packaging special style 250 vdc coefficient code tolerance level 1 = 7" reel code 0805 telco x7r (2 significant k = 10% a = standard 3 = 13" reel a = standard 1206 rating digits + no. m = 20% 9 = bulk 1210 of zeros) 1808 examples: 1812 1,000 pf = 102 1825 22,000 pf = 223 2220 220,000 pf = 224 2225 1 f = 105 style 0805 1206 1210* 1808* 1812* 1825* 2220* 2225* (l) length 2.01 0.20 3.20 0.20 3.2 0.20 4.57 0.25 4.50 0.30 4.50 0.30 5.60 0.30 5.60 0.25 (0.079 0.008) (0.126 0.008) (0.126 0.008) (0.180 0.010) (0.177 0.012) (0.177 0.012) (0.220 0.012) (0.220 0.010) (w)width 1.25 0.20 1.60 0.20 2.50 0.20 2.03 0.25 3.2 0.20 6.34 0.30 5.10 0.40 6.35 0.25 (0.049 0.008) (0.063 0.008) (0.098 0.008) (0.080 0.010) (0.126 0.008) (0.252 0.012) (0.200 0.016) (0.250 0.010) (t) thickness 1.30 max. 1.50 max. 1.78 max. 1.78 max. 2.00 max. 2.00max. 2.00 max. 2.00 max. (0.051 max.) (0.059 max.) (0.070 max.) (0.070 max.) (0.080 max.) (0.080 max.) (0.080 max.) (0.080 max.) (t) terminal 0.50 0.25 0.50 0.25 0.50 0.25 0.63 0.38 0.63 0.38 0.63 0.38 0.63 0.38 0.63 0.38 (0.020 0.010) (0.020 0.010) (0.020 0.010) (0.025 0.015) (0.025 0.015) (0.025 0.015) (0.025 0.015) (0.025 0.015) dimensions millimeters (inches) *reflow soldering only termination t = plated ni and sn (rohs compliant) z = flexiterm ? 100% tin (rohs compliant) w l t t contact factory for availability of termination and tolerance options for specific part numbers.
113 250v tip & ring -250v -400ms 200ms/div 1.6s 0 -48v tip & ring multilayer ceramic chip capacitors capacitance range (f) tip & ring graph capacitance range 1000 pf to 1.2 f (25c, 1.0 0.2 vrms at 1khz) capacitance tolerances 10%, 20% dissipation factor 2.5% max. (25c, 1.0 0.2 vrms at 1khz) operating temperature range -55c to +125c temperature characteristic x7r 15% (0 vdc) voltage rating 250 vdc telco rating insulation resistance 1000 megohm-microfarad min. dielectric strength minimum 200% rated voltage for 5 seconds at 50 ma max. current performance characteristics size 0805 1206 1210 1808 1812 1825 2220 2225 min. 0.0010 0.0010 0.0010 0.010 0.10 0.33 0.47 0.47 max. 0.027 0.082 0.22 0.27 0.47 1.0 1.0 1.2
114 tip & ring tin/lead termination b multilayer ceramic chip capacitors avx corporation will support customers for commercial and military multilayer ceramic capacitors with a termination consisting of 5% minimum lead. this termination is indicated by the use of a b in the 12th position of the avx catalog part number. this fulfills avxs commitment to providing a full range of products to our customers. avx has provided in the following pages, a full range of values that we are offering in this b termination. avx tip & ring or ring detector multilayer ceramic chip capacitors are designed as a standard telecom filter to block -48 volts dc telephone line volt- age and pass subscribers ac signal pulse (16 to 25hz, 70 to 90 vrms). the typical ringing signal is seen on figure on page 115. the ringer capacitors replace large leaded film capacitors and are ideal for telecom/modem applica- tions. using avx tip and ring capacitors not only saves valuable real estate on the board and reduces the weight of the overall product, but also features standard surface mounting capabilities, so critical to new and compact designs. the avx tip & ring capacitors are offered in standard eia sizes and standard values. they offer excellent high frequency performance, low esr and improved temperature performance over film capacitors. style (size) ld05 (0805) ld06 (1206) ld10* (1210) ld08* (1808) ld12* (1812) ld13* (1825) ld20* (2220) ld14* (2225) (l) length 2.01 0.20 3.20 0.20 3.2 0.20 4.57 0.25 4.50 0.30 4.50 0.30 5.60 0.30 5.60 0.25 (0.079 0.008) (0.126 0.008) (0.126 0.008) (0.180 0.010) (0.177 0.012) (0.177 0.012) (0.220 0.012) (0.220 0.010) (w)width 1.25 0.20 1.60 0.20 2.50 0.20 2.03 0.25 3.2 0.20 6.34 0.30 5.10 0.40 6.35 0.25 (0.049 0.008) (0.063 0.008) (0.098 0.008) (0.080 0.010) (0.126 0.008) (0.252 0.012) (0.200 0.016) (0.250 0.010) (t) thickness 1.30 max. 1.50 max. 1.78 max. 1.78 max. 2.00 max. 2.00max. 2.00 max. 2.00 max. (0.051 max.) (0.059 max.) (0.070 max.) (0.070 max.) (0.080 max.) (0.080 max.) (0.080 max.) (0.080 max.) (t) terminal 0.50 0.25 0.50 0.25 0.50 0.25 0.63 0.38 0.63 0.38 0.63 0.38 0.63 0.38 0.63 0.38 (0.020 0.010) (0.020 0.010) (0.020 0.010) (0.025 0.015) (0.025 0.015) (0.025 0.015) (0.025 0.015) (0.025 0.015) dimensions millimeters (inches) *reflow soldering only w l t t how to order ld12 avx style ld05 - 0805 ld06 - 1206 ld10 - 1210 ld08 - 1808 ld12 - 1812 ld13 - 1825 ld20 - 2220 ld14 - 2225 c temperature coefficient x7r 104 capacitance code (2 significant digits + no. of zeros) examples: 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 1 f = 105 k capacitance tolerance k = 10% m = 20% a te s t level a = standard 1 packaging 1 = 7" reel 3 = 13" reel 9 = bulk a special code a = standard p voltage 250 vdc telco rating b termination b = 5% min pb x = flexiterm ? 5% min. pb contact factory for availability of termination and tolerance options for specific part numbers. not rohs compliant
115 250v tip & ring -250v -400ms 200ms/div 1.6s 0 -48v tip & ring tin/lead termination b multilayer ceramic chip capacitors capacitance range (f) tip & ring graph capacitance range 1000 pf to 1.2 f (25c, 1.0 0.2 vrms at 1khz) capacitance tolerances 10%, 20% dissipation factor 2.5% max. (25c, 1.0 0.2 vrms at 1khz) operating temperature range -55c to +125c temperature characteristic x7r 15% (0 vdc) voltage rating 250 vdc telco rating insulation resistance 1000 megohm-microfarad min. dielectric strength minimum 200% rated voltage for 5 seconds at 50 ma max. current performance characteristics style (size) ld05 (0805) ld06 (1206) ld10 (1210) ld08 (1808) ld12 (1812) ld13 (1825) ld20 (2220) ld14 (2225) min. 0.0010 0.0010 0.0010 0.010 0.10 0.33 0.47 0.47 max. 0.027 0.082 0.22 0.27 0.47 1.0 1.0 1.2
116 metric dimensions will govern. english measurements rounded and for reference only. mlc chips packaging of chip components tape & reel quantities all tape and reel specifications are in compliance with eia481 or iec-286-3. tape size 8mm 12mm 24mm component pitch p 1 4.00 4.00 8.00 8.00 16.00 1812 (ld12) 0805 (ld05) 1825 (ld13) hqcc 3640 (ld40) 1206 (ld06) 1808 (ld08) 2220 (ld20) hqce 1210 (ld10) 2225 (ld14) qty. per reel/7" reel 2000 2000 1000 500 n/a qty. per reel/13" reel 10,000 4000 4000 2000 1000 ta p e a b * c d* n w 1 w 2 w 3 size max. min. min. min. max. +1.5 7.9 min. 8mm 330 1.5 13.00.20 20.2 50 8.4 -0.0 14.4 (0.311) (12.992) (0.059) (0.5120.008) (0.795) (1.969) (0.331 +.059 ) (0.567) 10.9 max. -0.0 (0.429) +2.0 11.9 min. 12mm 330 1.5 13.00.20 20.2 50 12.4 -0.0 18.4 (0.469) (12.992) (0.059) (0.5120.008) (0.795) (1.969) (0.488 +.079 ) (0.724) 15.4 max. -0.0 (0.606) +0.5 +2.0 23.9 min. 24mm 360 1.5 13.0 -0.2 20.2 60 24.4 -0.0 30.4 (0.941) (14.173) (0.059) (0.512 +.020 ) (0.795) (2.362) (0.961 +.079 ) (1.197) 27.4 max. -.008 -0.0 (1.079) automatic insertion packaging dimensions millimeters (inches) note: lower quantity per reel may be used at the discretion of avx. reel dimensions performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
117 mlc chips packaging of chip components p 0 b 0 p 1 p 2 d 0 t 2 t top cover tape deformation between embossments center lines of cavity max. cavity size - see note 1 d 1 for components 2.00 mm x 1.20 mm and larger (0.079 x 0.047) 10 pitches cumulative tolerance on tape 0.2mm ( 0.008) b 1 e 1 f embossment user direction of feed e 2 w k 0 t 1 s 1 a 0 b 1 is for tape reader reference only including draft concentric around b 0 8mm, 12mm & 24mm embossed tape metric dimensions will govern constant dimensions millimeters (inches) variable dimensions millimeters (inches) notes: 1. the cavity defined by a 0 , b 0 , and k 0 shall be configured to provide the following: surround the component with sufficient clearance such that: a) the component does not protrude beyond the sealing plane of the cover tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the cover tape has been removed. c) rotation of the component is limited to 20o maximum (see sketches d & e). d) lateral movement of the component is restricted to 0.5mm maximum (see sketch f). 2. tape with or without components shall pass around radius r without damage. 3. bar code labeling (if required) shall be on the side of the reel opposite the round sprocket holes. refer to eia-556. 4. b 1 dimension is a reference dimension for tape feeder clearance only. tape size d 0 e 1 p 0 s 1 min. t max. t 1 8mm 1.75 0.10 4.0 0.10 0.60 0.60 0.10 12mm (0.069 0.004) (0.157 0.004) (0.024) (0.024) (0.004) 24mm max. 0.50mm (0.020) maximum 0.50mm (0.020) maximum top view, sketch "f"? component lateral movements chip orientation 1.50 +0.10 -0.0 (0.059 +0.004 ) -0.0 tape size b 1 d 1 e 2 fp 1 p 2 rt 2 wa 0 b 0 k 0 max. min. min. min. max. max. see note 2 8mm 4.35 1.00 6.25 3.50 0.05 4.00 0.10 2.00 0.05 25.0 2.50 8.30 see note 1 (0.171) (0.039) (0.246) (0.138 0.002) (0.157 0.004) (0.079 0.002) (0.984) (0.098) (0.327) 12mm 8.20 1.50 10.25 5.50 0.05 4.00 0.10 2.00 0.05 30.0 6.50 12.3 see note 1 (0.323) (0.059) (0.404) (0.217 0.002) (0.157 0.004) (0.079 0.002) (1.181) (0.256) (0.484) 12mm 8.20 1.50 10.25 5.50 0.05 8.00 0.10 2.00 0.05 30.0 6.50 12.3 see note 1 double (0.323) (0.059) (0.404) (0.217 0.002) (0.315 0.004) (0.079 0.002) (1.181) (0.256) (0.484) pitch 24mm 20.10 1.50 22.25 11.5 0.10 16.00 0.10 2.00 0.10 30.0 12.00 24.3 see note 1 (0.791) (0.059) (0.876) (0.453 0.004) (0.630 0.004) (0.079 0.004) (1.181) (0.472) (0.957) side or front sectional view sketch ?d? top view sketch ?e?
118 high voltage ceramic capacitors hp/hw/hk type C strontium-based dielectric dielectric characteristics electrical characteristics tpc code e dielectric class (din) n4700 operating temperature range (oc) -30/+85c capacitance change with temperature (%) +22/-33% typical dielectric constant 1850 dielectric strength 8.0 kv dc /mm dissipation factor 20.10 -4 (1khz/1v rms /20oc) insulation resistance >100g (1000v d / 20oc / 60s) rated voltage (v r ) 15 to 100 kvdc* test voltage (v e ) 12 to 80 kvrms (50hz, in oil, 60s) operating temperature ranges -30 +85oc temperature characteristic n4700 dissipation factor <20.10 -4 (20oc, 1khz, 1v rms ) insulation resistance >100g (1000vdc/60s) capacitance range 195pf to 5600pf (20oc C 1khz C 1v rms ) tolerance standard: 20% on request: 10% self-inductance l s 30nh *up to 150kvdc: upon request features ? excellent behavior on pulse and fast discharge conditions ? excellent capacitance vs voltage characteristic ? low dissipation factor ? very low corona effect ? coated and uncoated devices available applications ? high-voltage supply for gas lasers ? high-voltage dividers ? marx generators ? power generators ? high-voltage power supply ? high-voltage coupling devices ? power line coupling system for internet & telecom technology ? hp range: coated capacitor with fixtures ? hw range: uncoated capacitor with fixtures ? hk range: uncoated capacitor without fixtures ? fixtures: m5 ? marking: on each part: type C capacitance C rated voltage ? delivery mode: bulk in carton box ? dielectric type ii: n4700 class
119 high voltage ceramic capacitors hp/hw/hk type C strontium-based dielectric part number rated rated test corona capacitance voltage voltage voltage inception 20% dimensions millimeters (inches) packaging kvdc kvrms kvrms voltage (pf) ? 1 d l 1 h 2 unit (kvrms) 10% (<10pc) on request hp30ex0561m - - 560 28 (1.100) 12 (0.472) 40 hp30ex0751m - - 750 28 (1.100) 12 (0.472) 40 hp30ex0102m - - 1000 28 (1.100) 12 (0.472) 40 hp40ex0152m - - 1500 38 (1.500) 12 (0.472) 40 hp40ex0182m - - 1800 38 (1.500) 12 (0.472) 40 hp40ex0202m - - 2000 38 (1.500) 12 (0.472) 40 hp50ex0252m - - 15 10 12 6 2500 48 (1.900) 12 (0.472) 22 (0.866) 16 (0.630) 45 hp50ex0272m - - 2700 48 (1.900) 12 (0.472) 45 hp50ex0332m - - 3300 48 (1.900) 12 (0.472) 45 hp60ex0372m - - 3700 58 (2.283) 15 (0.591) 20 hp60ex0402m - - 4000 58 (2.283) 15 (0.591) 20 hp60ex0502m - - 5000 58 (2.283) 15 (0.591) 20 hp60ex0562m - - 5600 58 (2.283) 15 (0.591) 20 hp30ey0501m - - 500 28 (1.100) 12 (0.472) 40 hp30ey0561m - - 560 28 (1.100) 12 (0.472) 40 hp30ey0751m - - 750 28 (1.100) 12 (0.472) 40 hp40ey0102m - - 1000 38 (1.500) 12 (0.472) 40 hp40ey0132m - - 1300 38 (1.500) 12 (0.472) 40 hp40ey0152m - - 1500 38 (1.500) 12 (0.472) 40 hp50ey0202m - - 20 15 18 9 2000 48 (1.900) 12 (0.472) 24 (0.945) 18 (0.709) 45 hp50ey0222m - - 2200 48 (1.900) 12 (0.472) 45 hp50ey0252m - - 2500 48 (1.900) 12 (0.472) 45 hp60ey0302m - - 3000 58 (2.283) 15 (0.591) 20 hp60ey0332m - - 3300 58 (2.283) 15 (0.591) 20 hp60ey0372m - - 3700 58 (2.283) 15 (0.591) 20 hp60ey0402m - - 4000 58 (2.283) 15 (0.591) 20 hp30e30561m - - 560 28 (1.100) 12 (0.472) 40 hp40e30821m - - 820 38 (1.500) 12 (0.472) 40 hp40e30102m - - 1000 38 (1.500) 12 (0.472) 40 hp40e31121m - - 1120 38 (1.500) 12 (0.472) 40 hp50e30152m - - 30 20 24 12 1500 48 (1.900) 12 (0.472) 26 (1.024) 20 (0.787) 45 hp50e30172m - - 1700 48 (1.900) 12 (0.472) 45 hp50e30202m - - 2000 48 (1.900) 12 (0.472) 45 hp60e30272m - - 2700 58 (2.283) 15 (0.591) 20 hp60e30302m - - 3000 58 (2.283) 15 (0.591) 20 hp60e30332m - - 3300 58 (2.283) 15 (0.591) 20 hp30e40391m - - 390 28 (1.100) 12 (0.472) 40 hp40e40751m - - 750 38 (1.500) 12 (0.472) 40 hp50e40102m - - 1000 48 (1.900) 12 (0.472) 30 hp50e40142m - - 40 28 33 17 1400 48 (1.900) 12 (0.472) 30 (1.180) 24 (0.945) 30 hp60e40172m - - 1700 58 (2.283) 15 (0.591) 20 hp60e40202m - - 2000 58 (2.283) 15 (0.591) 20 hp60e40242m - - 2400 58 (2.283) 15 (0.591) 20 d hl m ? hp range: coated devices with fixtures references C voltage and capacitance range -other tolerance on capacitance value: please consult us all fixtures: m5 (0.197)
120 part number rated rated test corona capacitance voltage voltage voltage inception 20% dimensions millimeters (inches) packaging kvdc kvrms kvrms voltage (pf) ? 1 d l 1 h 2 unit (kvrms) 10% (<10pc) on request hp30e50281m - - 280 28 (1.100) 12 (0.472) hp40e50411m - - 410 38 (1.500) 12 (0.472) hp40e50501m - - 500 38 (1.500) 12 (0.472) hp40e50561m - - 560 38 (1.500) 12 (0.472) hp50e50751m - - 750 48 (1.900) 12 (0.472) hp50e50851m - - 50 35 42 21 850 48 (1.900) 12 (0.472) 37 (1.457) 31 (1.221) x hp50e50102m - - 1000 48 (1.900) 12 (0.472) hp60e51351m - - 1350 58 (2.283) 15 (0.591) hp60e50152m - - 1500 58 (2.283) 15 (0.591) hp60e51651m - - 1650 58 (2.283) 15 (0.591) hp30e61950m - - 195 28 (1.100) 12 (0.472) hp40e63750m - - 375 38 (1.500) 12 (0.472) hp50e60501m - - 500 48 (1.900) 12 (0.472) hp50e60701m - - 60 42 50 25 700 48 (1.900) 12 (0.472) 45 (1.772) 39 (1.536) x hp60e60851m - - 850 58 (2.283) 15 (0.591) hp60e60102m - - 1000 58 (2.283) 15 (0.591) hp60e60122m - - 1200 58 (2.283) 15 (0.591) hp50e90501m - - 500 48 (1.900) 12 (0.472) 15 hp60e96750m - - 675 58 (2.283) 15 (0.591) 10 hp60e90751m - - 100 70 80 40 750 58 (2.283) 15 (0.591) 58.5 (2.303) 53 (2.087) 10 hp60e98250m - - 825 58 (2.283) 15 (0.591) 10 x = open request -other tolerance on capacitance value: please consult us high voltage ceramic capacitors hp/hw/hk type C strontium-based dielectric d hl m ? hp range: coated devices with fixtures references C voltage and capacitance range all fixtures: m5 (0.197)
121 high voltage ceramic capacitors hp/hw/hk type C strontium-based dielectric m e l d ? hw range: uncoated devices with fixtures references C voltage and capacitance range handling of uncoated devices must be done under strict cleanliness conditions. all fixtures: m5 (0.197) *tested in oil or galden -other tolerance on capacitance value: please consult us part number rated rated test corona capacitance voltage voltage voltage inception 20% dimensions millimeters (inches) packaging (kvdc) (kvrms) (kvrms)* voltage (pf) ? 2 l 1 e 2 unit (kvrms) 10% (<12pc)* on request hw30ex0561m - - 560 17 (0.670) 40 hw30ex0751m - - 750 18 (0.719) 40 hw30ex0102m - - 1000 21 (0.827) 40 hw40ex0152m - - 1500 26 (1.024) 40 hw40ex0182m - - 1800 28 (1.103) 40 hw40ex0202m - - 2000 29 (1.142) 60 hw50ex0252m - - 15 10 12 6 2500 34 (1.339) 22 (0.866) 6 (0.236) 45 hw50ex0272m - - 2700 35 (1.378) 45 hw50ex0332m - - 3300 38 (1.496) 45 hw60ex0372m - - 3700 41 (1.614) 30 hw60ex0402m - - 4000 43 (1.692) 30 hw60ex0502m - - 5000 47 (1.850) 30 hw60ex0562m - - 5600 49 (1.929) 30 hw30ey0501m - - 500 17 (0.670) 40 hw30ey0561m - - 560 18 (0.719) 40 hw30ey0751m - - 750 21 (0.827) 40 hw40ey0102m - - 1000 26 (1.024) 40 hw40ey0132m - - 1300 28 (1.103) 40 hw40ey0152m - - 20 15 18 9 1500 29 (1.142) 40 hw50ey0202m - - 2000 34 (1.339) 24 (0.945) 8 (0.314) 45 hw50ey0222m - - 2200 35 (1.378) 45 hw50ey0252m - - 2500 38 (1.496) 45 hw60ey0302m - - 3000 41 (1.614) 20 hw60ey0332m - - 3300 43 (1.692) 20 hw60ey0372m - - 3700 47 (1.850) 20 hw60ey0402m - - 4000 49 (1.929) 20 hw30e30561m - - 560 21 (0.827) 40 hw40e30821m - - 820 26 (1.024) 40 hw40e30102m - - 1000 28 (1.103) 40 hw40e31121m - - 1120 29 (1.142) 40 hw50e30152m - - 30 20 24 12 1500 34 (1.339) 26 (1.024) 10 (0.394) 45 hw50e30172m - - 1700 35 (1.378) 45 hw50e30202m - - 2000 38 (1.496) 45 hw60e30272m - - 2700 43 (1.692) 20 hw60e30302m - - 3000 47 (1.850) 20 hw60e30332m - - 3300 49 (1.929) 20 hw30e40391m - - 390 21 (0.827) 40 hw40e40751m - - 750 28 (1.103) 40 hw50e40102m - - 1000 34 (1.339) 30 hw50e40142m - - 40 28 33 17 1400 38 (1.496) 30 (1.180) 14 (0.552) 30 hw60e40172m - - 1700 41 (1.614) 20 hw60e40202m - - 2000 47 (1.850) 20 hw60e40242m - - 2400 49 (1.929) 20
122 high voltage ceramic capacitors hp/hw/hk type C strontium-based dielectric m e l d ? hw range: uncoated devices with fixtures references C voltage and capacitance range handling of uncoated devices must be done under strict cleanliness conditions. all fixtures: m5 (0.197) *tested in oil or galden x = open request -other tolerance on capacitance value: please consult us part number rated rated test corona capacitance voltage voltage voltage inception 20% dimensions millimeters (inches) packaging (kvdc) (kvrms) (kvrms)* voltage (pf) ? 2 l 1 e 2 unit (kvrms) 10% (<12pc)* on request hw30e50281m - - 280 21 (0.827) hw40e50411m - - 410 26 (1.024) hw40e50501m - - 500 28 (1.103) hw40e50561m - - 560 29 (1.142) hw50e50751m - - 750 34 (1.339) hw50e50851m - - 50 35 42 21 850 35 (1.378) 37 (1.457) 21 (0.827) x hw50e50102m - - 1000 38 (1.496) hw60e51351m - - 1350 43 (1.692) hw60e50152m - - 1500 47 (1.850) hw60e51651m - - 1650 49 (1.929) hw30e61950m - - 195 21 (0.827) hw40e63750m - - 375 28 (1.024) hw50e60501m - - 500 34 (1.339) hw50e60701m - - 60 42 50 25 700 38 (1.496) 45 (1.772) 29 (1.142) x hw60e60851m - - 850 41 (1.614) hw60e60102m - - 1000 47 (1.850) hw60e60122m - - 1200 49 (1.929) hw50e90501m - - 500 38 (1.496) 15 hw60e96750m - - 675 43 (1.693) 10 hw60e90751m - - 100 70 80 40 750 47 (1.850) 58.5 (2.303) 43 (1.693) 10 hw60e98250m - - 825 49 (1.929) 10
123 high voltage ceramic capacitors hp/hw/hk type C strontium-based dielectric e ? hk range: uncoated devices without fixtures references C voltage and capacitance range handling of uncoated devices must be done under strict cleanliness conditions. *tested in oil or galden -other tolerance on capacitance value: please consult us part number rated rated test corona capacitance voltage voltage voltage inception 20% (pf) dimensions millimeters (inches) (kvdc) (kvrms) (kvrms)* voltage 10% on ? 2 e 2 (kvrms) request (<12pc)* hk30ex0561m - - 560 17 (0.670) hk30ex0751m - - 750 18 (0.719) hk30ex0102m - - 1000 21 (0.827) hk40ex0152m - - 1500 26 (1.024) hk40ex0182m - - 1800 28 (1.103) hk40ex0202m - - 2000 29 (1.142) hk50ex0252m - - 15 10 12 6 2500 34 (1.339) 6 (0.236) hk50ex0272m - - 2700 35 (1.378) hk50ex0332m - - 3300 38 (1.496) hk60ex0372m - - 3700 41 (1.614) hk60ex0402m - - 4000 43 (1.692) hk60ex0502m - - 5000 47 (1.850) hk60ex0562m - - 5600 49 (1.929) hk30ey0501m - - 500 17 (0.670) hk30ey0561m - - 560 18 (0.719) hk30ey0751m - - 750 21 (0.827) hk40ey0102m - - 1000 26 (1.024) hk40ey0132m - - 1300 28 (1.103) hk40ey0152m - - 20 15 18 9 1500 29 (1.142) hk50ey0202m - - 2000 34 (1.339) 8 (0.314) hk50ey0222m - - 2200 35 (1.378) hk50ey0252m - - 2500 38 (1.496) hk60ey0302m - - 3000 41 (1.614) hk60ey0302m - - 3300 43 (1.692) hk60ey0372m - - 3700 47 (1.850) hk60ey0402m - - 4000 49 (1.929) hk30e30561m - - 560 21 (0.827) hk40e30821m - - 820 26 (1.024) hk40e30102m - - 1000 28 (1.103) hk40e31121m - - 1120 29 (1.142) hk50e30152m - - 30 20 24 12 1500 34 (1.339) 10 (0.394) hk50e30172m - - 1700 35 (1.378) hk50e30202m - - 2000 38 (1.496) hk60e30272m - - 2700 43 (1.692) hk60e30302m - - 3000 47 (1.850) hk60e30332m - - 3300 49 (1.929) hk30e40391m - - 390 21 (0.827) hk40e40721m - - 720 28 (1.103) hk50e40102m - - 1000 34 (1.339) hk50e40142m - - 40 28 33 17 1400 38 (1.496) 14 (0.552) hk60e40172m - - 1700 41 (1.614) hk60e40202m - - 2000 47 (1.850) hk60e40242m - - 2400 49 (1.929)
124 high voltage ceramic capacitors hp/hw/hk type C strontium-based dielectric e ? hk range: uncoated devices without fixtures references C voltage and capacitance range handling of uncoated devices must be done under strict cleanliness conditions. *tested in oil or galden -other tolerance on capacitance value: please consult us part number rated rated test corona capacitance voltage voltage voltage inception 20% (pf) dimensions millimeters (inches) (kvdc) (kvrms) (kvrms)* voltage 10% on ? 2 e 2 (kvrms) request (<12pc)* hk30e50281m - - 280 21 (0.827) hk40e50411m - - 410 26 (1.024) hk40e50501m - - 500 28 (1.103) hk40e50561m - - 560 29 (1.142) hk50e50751m - - 750 34 (1.339) hk50e50851m - - 50 35 42 21 850 35 (1.378) 21 (0.827) hk50e50102m - - 1000 38 (1.496) hk60e51351m - - 1350 43 (1.692) hk60e50152m - - 1500 47 (1.850) hk60e51651m - - 1650 49 (1.929) hk30e61950m - - 195 21 (0.827) hk40e63750m - - 375 28 (1.024) hk50e60501m - - 500 34 (1.339) hk50e60701m - - 60 42 50 25 700 38 (1.496) 29 (1.142) hk60e60851m - - 850 41 (1.614) hk60e60102m - - 1000 47 (1.850) hk60e60122m - - 1200 49 (1.929) hk50e90501m - - 500 38 (1.496) hk60e96750m - - 675 43 (1.693) hk60e90751m - - 100 70 80 40 750 47 (1.850) 43 (1.693) hk60e98250m - - 825 49 (1.929)
125 single-in-line packages (sip) capacitor arrays 10 9 8 7 6 5 4 3 2 1 circuit configuration "a"? one end lead ground 10 9 8 7 6 5 4 3 2 1 circuit configuration "b"? adjacent lead pair caps 10 9 8 7 6 5 4 3 2 1 circuit configuration "c"? both end leads ground 0.254 (0.010) typ. 1.524 (0.060) typ. length (max.) 7.62 (0.300) max. 3.81 (0.150) min. 0.508 (0.020) typ. 2.54 (0.100) typ. 3.429 (0.135) max. length = [# of leads x 2.54 (0.100)] + 1.27 (0.050) i.e., 10 lead sip = 26.67 (1.050) sip-style, mlc ceramic capacitor arrays are single-in-line, conformally coated packages. these capacitor networks incorporate multiple capacitors into a single substrate and, therefore, offer excellent tc tracking. the utilization of sip capacitor arrays minimizes board real estate and reduces component count in the assembly. various circuit configurations and capacitance/voltage values are available. dimensions in millimeters (inches) performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
126 single-in-line packages (sip) capacitor arrays specification # description circuit leads capacitance range 87112 bx-100 vdc a 8 1000 pf - 0.1 f 87116 c0g-100 vdc a 8 10 pf - 820 pf 87119 bx-100 vdc c 10 1000 pf - 0.1 f 87120 c0g-100 vdc c 10 10 pf - 1000 pf 87122 bx-100 vdc b 8 1000 pf - 0.1 f 88019 bx-100 vdc a 10 1000 pf - 0.1 f 89086 c0g-100 vdc b 8 10 pf - 820 pf avx is qualified to the following dscc drawings *for dimensions, voltages, or capacitance values not specified, please contact factory. how to order sp a 1 1 a 561 k a a avx style circuit lead voltage temperature capacitance capacitance test number of see page 125 style coefficient code tolerance level leads (a, b, c) 50v = 5 c0g = a (2 significant c0g: k = 10% a = standard 2 = 2 100v = 1 x7r = c digits + no. m = 20% 3 = 3 z5u = e of zero) x7r: k = 10% 4 = 4 10 pf = 100 m = 20% 5 = 5 100 pf = 101 z = +80%,-20% 6 = 6 1,000 pf = 102 z5u: m = 20% 7 = 7 22,000 pf = 223 z = +80%,-20% 8 = 8 220,000 pf = 224 p = gmv 9 = 9 1 f = 105 (+100,-0%) a = 10 10 f = 106 b = 11 100 f = 107 c = 12 d = 13 e = 14 maximum capacitance* 50v 100v c0g 2200 pf 1500 pf x7r 0.10 f 0.033 f z5u 0.39 f 0.10 f not rohs compliant
127 discoidal mlc feed-through capacitors and filters dc style (us preferred sizes) lowest capacitance impedances to ground temperature coefficient c0g: a temperature coefficient - 0 30 ppm/c, -55 +125c x7r: c temperature coefficient - 15%, -55 to +125c capacitance test (mil-std-202 method 305) c0g: 25c, 1.00.2 vrms at 1khz, for 100 pf use 1 mhz x7r: 25c, 1.00.2 vrms at 1khz dissipation factor 25c c0g: 0.15% max @ 25c, 1.00.2 vrms at 1khz, for 100 pf use 1 mhz x7r: 2.5% max @ 25c, 1.00.2 vrms at 1khz insulation resistance 25c (mil-std-202 method 302) c0g and x7r: 100k m or 1000 m-f, whichever is less. insulation resistance 125c (mil-std-202 method 302) c0g and x7r: 10k m or 100 m-f, whichever is less. z5u: 1k m or 100 m-f, whichever is less. dielectric withstanding voltage 25c (flash test)* c0g and x7r: 250% rated voltage for 5 seconds with 50 ma max charging current. 500v rated units will be tested at 750 vdc life test (1000 hrs) c0g and x7r: 200% rated voltage at +125c (500 volt units @ 600 vdc) moisture resistance ( mil -std-202 method 106) c0g, x7r: ten cycles with no voltage applied. thermal shock ( mil -std-202 method 107, condition a) immersion cycling ( mil -std-202 method 104, condition b) dc61 5 a 561 k a 5 1 06 avx voltage temperature capacitance code capacitance test termination inside maximum style 50v = 5 coefficient (2 significant digits tolerance level 5 = silver diameter thickness see pages 100v = 1 c0g = a + no. of zeros) c0g: j = 5% a = standard (avx standard) see pages 04 = 1.02 (0.040) 128-129 200v = 2 x7r = c examples: k = 10% a = unterminated 117-119 06 = 1.52 (0.060) 500v = 7 m = 20% 7 = snni w/a sputter 10 = 2.54 (0.100) x7r: k = 10% (100 inches) m = 20% for dimensions, voltages or values not specified, please consult factory. a discoidal mlc capacitor has very low impedance associated with its ground path since the signal is presented with a multi-directional path. these electrode paths, which can be as many as 100, allow for low esr and esl which are the major elements in impedance at high frequencies. the assembled discoidal element or feed-thru allows signal to be fed in through a chassis or bulkhead, conditioned as it passes through the discoidal, and isolated by the chassis and discoidal from the original signal. an example of this application would be in an aft circuit where the ac noise signal would be required to be stripped from the dc control signal. other applications include single line emi/rfi suppression, l-c filter construction, and coaxial shield bypass filtering. the shape of the discoidal lends itself to filter construction. the short length allows compact construction where l-c construction is desired. the size freedom associated with this element allows almost any inside/ outside diameter combination. by allowing the inside diameter to equal the center insulator diameter of a coaxial signal line and special termination techniques, this device will allow bypass filtering of a floating shield to ground. * discoidal capacitors are available in two (2) temperature coefficients (c0g, x7r) and a variety of shapes and sizes, the most standard of which appear on pages 104 and 105. * custom designed capacitor arrays are available in an unlimited number of configuration with a wide range of rating voltages (50C2000) and temperature coefficients (npo, bx, br, x7r) please see page 130. for additional information please contact avx. insertion loss 0 1 0 0 2 0 0 3 0 0 4 0 0 5 0 0 6 0 0 7 0 0 8 0 0 9 0 0 1 0 0 0 single chip discoidal 0 -1 0 -2 0 -3 0 -4 0 -5 0 -6 0 -7 0 -8 0 f (m h z) (db ) how to order od* id t max. these surfaces are metallized .127 (0.005). minimum wide except for dc61, dc26 and dc63 where metallized surfaces are .127 (0.005) maximum. *tol. = .254 (0.010) or 3%, whichever is greater + - electrical specifications application information on discoidal 10 pf = 100 100 pf = 101 1,000 pf = 102 22,000 pf = 223 220,000 pf = 224 avxs dc series 50v, 100v, 200v, c0g and x7r parts are capable of meeting the requirements of mil-prf-31033. performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant
128 inside diameter: size and capacitance specifications dimensions: millimeters (inches) 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 *outside diameter: tolerance is 0.254 (0.010) or 3% whichever is greater 1 = .635 +.127 (.025 +.005 ) -.051 -.002 2 = .762 +.127 (.030 +.005 ) -.051 -.002 3 = .914 +.127 (.036 +.005 ) -.051 -.002 4 = 1.07 +.127 (.042 +.005 ) -.051 -.002 5 = 1.27.127 (0.050.005) 6 = 1.52.127 (0.060.005) 7 = 1.73.127 (0.068.005) eia characteristic c0g avx style dc50 dc80 dc61 dc26 dc63 dc04 dc65 dc66 dc67 dc69 dc32 dc70 dc02 dc71 dc05 dc73 dc72 outside 0.05 0.80 2.54 3.43 3.81 4.83 5.33 5.97 6.73 8.13 8.51 8.89 9.40 9.78 12.70 15.24 16.26 diameter (od)* (0.002) (0.003) (0.100) (0.135) (0.150) (0.190) (0.210) (0.235) (0.265) (0.320) (0.335) (0.350) (0.370) (0.385) (0.500) (0.600) (0.640) thickness 0.04 0.04 1.52 1.52 1.52 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 maximum (t) (0.002) (0.002) (0.060) (0.060) (0.060) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) inside 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 diameter no. (id) 1 1,2 1,2 1,2,3 1,2,3,4 1,2,3 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 termination sputter all voltage cap. in pf 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 discoidal mlc feed-through capacitors and filters dc style performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. 50 dc50 termination can only be sputter a
129 *outside diameter: tolerance is 0.254 (0.010) or 3% whichever is greater size and capacitance specifications dimensions: millimeters (inches) eia characteristic x7r avx style dc50 dc80 dc61 dc26 dc63 dc04 dc65 dc66 dc67 dc69 dc32 dc70 dc02 dc71 dc05 dc73 dc72 outside 0.05 0.08 2.54 3.43 3.81 4.83 5.33 5.97 6.73 8.13 8.51 8.89 9.40 9.78 12.70 15.24 16.26 diameter (od)* (0.002) (0.003) (0.100) (0.135) (0.150) (0.190) (0.210) (0.235) (0.265) (0.320) (0.335) (0.350) (0.370) (0.385) (0.500) (0.600) (0.640) thickness 0.04 0.04 1.52 1.52 1.52 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 maximum (t) (0.002) (0.002) (0.060) (0.060) (0.060) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) (0.100) inside 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 5,6,7 diameter no. (id) 1 1,2 1,2 1,2,3 1,2,3,4 1,2,3 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4 termination sputter all voltage cap. in pf 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1.0 f 1.2 f 1.5 f 1.8 f 2.2 f 2.7 f 3.3 f 3.9 f 6.8 f inside diameter: 1 = .635 +.127 (.025 +.005 ) -.051 -.002 2 = .762 +.127 (.030 +.005 ) -.051 -.002 3 = .914 +.127 (.036 +.005 ) -.051 -.002 4 = 1.07 +.127 (.042 +.005 ) -.051 -.002 5 = 1.27.127 (0.050.005) 6 = 1.52.127 (0.060.005) 7 = 1.73.127 (0.068.005) discoidal mlc feed-through capacitors and filters dc style 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 500 200 100 50 50 dc50 termination can only be sputter a
130 custom discoidal arrays custom applications requiring planar capacitor arrays designed to customer specif- ic schematic including unique shapes, sizes, hole / pin configurations, multiple capacitor values, internal &/or external grounds, and more. applications ? implantable medical ? military ? aerospace
131 filtered arrays xd... type types l p d d bm maxi thickness maxi xd07 7.00 0.15 2.54 1.70 0.15 1.00 0.10 0.3 2mm (4 capacitors) (0.275 0.006) (0.100) (0.067 0.006) (0.039 0.0039) xd06 6.00 0.15 2.54 1.70 0.15 1.00 0.10 0.3 2mm (4 capacitors) (0.236 0.006) (0.100) (0.067 0.006) (0.039 0.0039) xd03 6.00 x 3.00 0.15 2.54 1.70 0.15 1.0 0.10 0.3 1.5mm (2 capacitors) (0.236 x 0.118 0.006) (0.100) (0.067 0.006) (0.039 0.0039) style & dimensions millimeters (inches) how to order xd 06 z f 0153 k -- avx style size class voltage capacitance tolerance packaging xd 03 c = np0 f = 200 eia code np0 f = 1% suffix 06 z = x7r j = 500 on 3 or 4 g = 2% burn-in 100% 168h = t5 07 digits j = 5% burn-in 100% 48h = t3 k = 10% no burn-in = -- x7r j = 5% k = 10% m = 20% features ? to be used beneath a connector ? provide an emi filtered signal line between electronic modules ? effective insertion loss from 1mhz up to ~ 1ghz ? surface mount compatible l p d d bm p l tm cap. range x7r np0 (each cap.) 200vdc 500vdc 200vdc 500vdc xd07... 33nf 120nf 4.7nf 18nf 470pf 1500pf 220pf 620pf xd06... 15nf 68nf 2.2nf 10nf 220pf 750pf 120pf 330pf xd03... 8.2nf 39nf 1nf 4.7nf 180pf 390pf 82pf 180pf capacitance vs voltage table electrical characteristics dielectric class x7r np0 temperature coefficient c/c 15% (-55 +125c) 0 30ppm/c climatic category 55 / 125 / 56 55 / 125 / 56 rated voltage (u r ) 200 vdc 500vdc 200vdc 500vdc test voltage (u e ) 2 x u r 1.5 x u r 2 x u r 1.5 x u r tangent of loss angle - df tg 250(10 -4 ) tg 15(10 -4 ) insulation resistance c 10nf = ri 100 g ri 100 g c > 10nf = ri x c 1000s terminations: silver C palladium C platinum, on 4 or only 2 sides of the array performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci. not rohs compliant
132 132 the manufacturing facilities have is09001 approval. customers requiring bs9100 approved components are requested to follow these steps: 1. the customer shall submit a specifi- cation for the required components to avx for approval. once agreed a customer detail specification (cds) number will be allocated by avx to this specification. this number with its current revision must be quoted at the time of order placement. 2. if the customer has no specification, then avx will supply a copy of the standard cds for the customers approval and signature. as in 1 above, when agreed this cds num- ber must be quoted at order entry. in the event of agreement not being reached the component cannot be supplied to bs9100. for assistance contact: emap specification engineering dept. avx ltd. coleraine, northern ireland telephone ++44 (0)28703 44188, fax ++44 (0)28703 55527 procurement of components of bs9100 (ch/cv range 50-500v) baseline management a dedicated facility / bs9100 requirements baseline products a selection of options as a matter of course, avx maintains a level of quality control that is sufficient to guarantee whatever reliability specifi- cations are needed. however, avx goes further. there are over 65 quality control and inspection operations that are available as options to a customer. any number may be requested and written into a baseline process. the abbreviated list that follows indicates the breadth and thoroughness of avail- able q.c. services at avx: ultrasonic scanning destructive physical analysis (dpa) x-ray bondability testing sorting and matching to specification limits temperature and immersion cycling load/humidity life testing dye penetration evaluation 100% ceramic sheet inspection voltage conditioning termination pull testing pre-encapsulation inspection within the specials area, avx accom- modates a broad variety of customer needs. the avx facilities are capable of developing and producing the most reliable and advanced mlcs available anywhere in the world today. yet it is equally adept at making volume custom components that may differ only in markings or lead placement from the standard catalog part. stretching the limits advanced products are developed to meet the extraordinary needs of specific applications. requirements may include: low esr, low esl, voltages up to 10s of thousands, advanced decoupling designs for frequencies up to 10s of megahertz, temperatures up to 200c, extremely high current discharge, ability to perform in high radiation or toxic atmospheres, or minimizing piezoelectric effect in high vibration environments. in addition, solving customer packaging problems, aside from addressing circuit problems, is available. special lead frames for high current or special mounting requirements are examples. multiple ceramic chip package designs per customer requirements are also available. advanced products always begin with a joint development program involving avx and the customer. in undersea cable components, for example, capacitance and impedance ratings had to be maintained within 1% over the multi-year life of the system. in this case, advanced products not only met the parametric requirements of the customer, but accelerated life testing of 3,500 units indicated an average life expectancy of over 100,000 years. baseline program management baseline program management has been avxs forte over the years. this is both a product and a service function designed to provide the customer the full capabilities of avx in meeting their program requirements. avx has had baseline and program management in the following major systems: at&t undersea cable minuteman peacekeeper stc undersea cable cit undersea cable raytheon-hawk missile trident small missile program northrop - peacekeeper sparrow program space station european space agency (esa) commercial satellite program arianne 4 & 5 eurofighter (typhoon) eh101 (merlin) avx technical personnel stand ready to answer any questions and provide any information required on your programs from the most exotic hi-rel part to the simplest variation on a standard. put the experience, technology and facilities of the leading company in multilayer ceramics to work for you. no other source offers the unique combination of capability and commitment to advanced application specific components. packaging unless otherwise stated in the appropriate data sheet parts are supplied in a waffle pack. performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
133 advanced application specific products examples of special packaging and custom lead configurations from advanced products custom lead configurations. . . optimum 3d packaging, high current applications and high reliability stress relief mounting. custom packaging. . . eliminate reliability concerns with multiple component assembly. many other innovations are available from advanced products. let them apply these ideas to your application specific programs. performance of smps capacitors can also be simulated by downloading the newly updated spicalci 6.0 software program. custom values, ratings and configurations are also available, http://www.avx.com/spiapps/default.asp#spicalci.
s- ap0m712 -c a kyocera group company http://www.avx.com contact: avx greenville, sc tel: 864-967-2150 avx northwest, wa tel: 360-699-8746 avx midwest, in tel: 317-861-9184 avx mid/pacific, ca tel: 408-988-4900 avx northeast, ma tel: 617-479-0345 avx southwest, ca tel: 949-859-9509 avx canada tel: 905-238-3151 avx south america tel: +55-11-4688-1960 avx limited, england tel: +44-1276-697000 avx s.a.s., france tel: +33-1-69-18-46-00 avx gmbh, germany tel: +49-0811-95949-0 avx srl, italy tel: +39-02-614-571 avx czech republic tel: +420-57-57-57-521 avx/elco uk tel: +44-1638-675000 elco europe gmbh tel: +49-2741-299-0 avx s.a., spain tel: +34-91-63-97-197 avx benelux tel: +31-187-489-337 avx/kyocera (s) pte ltd., singapore tel: +65-6286-7555 avx/kyocera, asia, ltd., hong kong tel: +852-2363-3303 avx/kyocera yuhan hoesa, south korea tel: +82-2785-6504 avx/kyocera hk ltd., taiwan tel: +886-2-2656-0258 avx/kyocera (m) sdn bhd, malaysia tel: +60-4228-1190 avx/kyocera international trading co. ltd., shanghai tel: +86-21-3255 1933 avx/kyocera asia ltd., shenzen tel: +86-755-3336-0615 avx/kyocera international trading co. ltd., beijing tel: +86-10-6588-3528 avx/kyocera india liaison office tel: +91-80-6450-0715 americas europe asia-pacific ked hong kong ltd. tel: +852-2305-1080/1223 ked hong kong ltd. shenzen tel: +86-755-3398-9600 ked company ltd. shanghai tel: +86-21-3255-1833 ked hong kong ltd. beijing tel: +86-10-5869-4655 ked taiwan ltd. tel: +886-2-2950-0268 ked korea yuhan hoesa, south korea tel: +82-2-783-3604/6126 ked (s) pte ltd. singapore tel: +65-6509-0328 kyocera corporation japan tel: +81-75-604-3449 asia-ked (kyocera electronic devices)

▲Up To Search▲

Price & Availability of 05041A0R5CA79A

	To Download 05041A0R5CA79A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .